Add a new fe dedicated for hearing aid and the support
of reading data from a new proxy port.
Change-Id: Id2e8ade6bfe5412ca6520d3cff70d6eebad7d7cc
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add change to support BE DAI link based on proxy
ports.
Change-Id: Id7ca274e330f025ac015567de86403fb14781cd0
Signed-off-by: Saurav Kumar <sauravk@codeaurora.org>
Add external display dai links to sound card only when
CONFIG_AUDIO_QGKI is enabled.
Change-Id: Ic67def877cddeb08aebcfc00ab4886826905b7c2
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Compile hdmi_dlkm kernel module only when both
CONFIG_SND_SOC_MSM_HDMI_CODEC_RX and CONFIG_AUDIO_QGKI configs
are enabled.
Change-Id: I31864e8b764dbcb40e0b96ac3a98f626dab315d2
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Update speaker playback sequence on wsa883x codec to
avoid click and pop and loss of VI sense data on speaker.
Change-Id: I8ec7072b63bef6c2e7bd64c96df4d98852c4f40d
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Since clock stop mode is supported, disable mic bias supply
after a successful dmic probe.
Change-Id: I1a545969601367cc22844d1ab8467fb3722d882f
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Update sequence to enable temperature sensor in wsa883x to
read proper temperature measurement.
Change-Id: I7db16344a92b82539929511bd0de322ed086beb7
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Because of a HW limitation in DSP, while switching
RCG from TX MCLK to VA MCLK for SVA use cases
a glitch is seen on AHB bus leading to data
corruption in registers.
So, while doing a mux switch for VA RCG clock selection,
do not configure the muxsel register in HLOS as it is
taken care in DSP itself as a workaround for HW limitation.
Change-Id: Iccbe714397796259fa55f9852ece387e949b12e8
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Remove sound wire dmic device from master device list only during
critical error and not for probe defer.
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Soundwire DMICs provide the same quality as regular DMICs but
the interface is soundwire. This reduces the number of pins
on the MSM. Enable soundwire DMICs on lahaina.
Change-Id: I4245369fdcb29cf96f315ebc1d2e9a83a0fbc14b
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add micbias control API to enable SWR DMICs on lahaina target.
Change-Id: I48152971e1af8dedc98ada20e4e808cf18720869
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Some usecases need soundwire bus clock frequency to run at
lower clock rate for better power and performance. Update
soundwire bus clock frequency based on usecase.
Change-Id: I2e786d9f5d5d2ec3841daa934802eeafa79a8f6c
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update the codec dai name for slimbus_7 backend dailink used for BT use
cases.
Change-Id: I7330f95a106a7c5b3b9d8c588f93342d466d2d2c
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
POWER_SUPPLY_TYPEC_SINK_AUDIO_ADAPTER is not supported on new
kernel-5.4. Update mode to TYPEC_ACCESSORY_AUDIO for analog
type-c headset.
Change-Id: Id46ea2eebea8257a48134431f07a81b6ed7e6c7d
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Disable clock gating when soundwire is out of clock stop mode.
Change-Id: I97187fa2deed26fb3270abee1d05f679ace2c0c4
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
While enabling headphone PA, bypass preref filter
to resolve clipping issue in the first second.
Change-Id: I7524fe3215bac267c5e199c715931712e16adf88
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Disable interrupts while bringing codec out of reset to avoid fake
interrupts.
Change-Id: Iec1e6c67429b7424693c2628e6f6d121a4c9ce71
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update soundwire slave registers as the per hardware specification.
Change-Id: I975d7f12273de2b2eb3d9323b6f781426e18c527
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update dai link names to match with machine driver.
Update typo in audio notifier function name.
Change-Id: I8ada233bbcb1596f245cf1925691c115c2d62755
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add dynamic port enablement for wcd938x and
wcd937x targets to support unified swr tx port
mapping added as part of SWR 1.6 updates.
Change-Id: If0cf823dc51028fd5bd95f5a49ffe05998526be6
Signed-off-by: Ramlal Karra <rkarra@codeaurora.org>
prtd->lsm_client->confidence_levels is allocated in
msm_lsm_get_conf_levels and not freed in msm_lsm_set_conf.
Make this change to free this memory.
Change-Id: I617703b36c13e065fdf995e89121c442b32b08f3
Signed-off-by: Meng Wang <mengw@codeaurora.org>
