qctecmdr
8de9d2bfb2
Merge "ARM: dts: msm: Add UFS support for SA8155"
2020-11-24 12:44:42 -08:00
qctecmdr
76964c82cb
Merge "ARM: dts: msm: DDR cooling device no mitigation for lahaina"
2020-11-24 12:44:42 -08:00
qctecmdr
54d0913edc
Merge "ARM: dts: msm: Add Wakeup interrupt controller for scuba-iot"
2020-11-24 09:02:36 -08:00
qctecmdr
784b16624c
Merge "ARM: dts: msm: Reduce secure heap to 30MB"
2020-11-24 09:02:36 -08:00
qctecmdr
3f05045f22
Merge "ARM: dts: msm: Add ARM PMU node for Yupik"
2020-11-24 09:02:35 -08:00
qctecmdr
3a8770cf70
Merge "ARM: dts: msm: Enable NAND and SD card for sdxlemur target"
2020-11-24 09:02:35 -08:00
qctecmdr
21eaa5d824
Merge "ARM: dts: msm: Support CNSS WLAN device for sdxlemur"
2020-11-24 09:02:35 -08:00
qctecmdr
9c62606c6a
Merge "ARM: dts: msm: Enable bluetooth for sdxlemur"
2020-11-24 09:02:35 -08:00
qctecmdr
b2549548aa
Merge "ARM: dts: msm: Change the node location for optimization for Shima"
2020-11-24 05:19:03 -08:00
qctecmdr
5b0380ed0d
Merge "ARM: dts: msm: Add QUPv3 SE and GPI DT nodes for yupik"
2020-11-24 05:19:03 -08:00
qctecmdr
702cd3fa53
Merge "ARM: dts: msm: Add Bus voting support"
2020-11-24 05:19:03 -08:00
qctecmdr
f99cb8e509
Merge "ARM: dts: msm: Disable scaling for SD and eMMC on sdxlemur"
2020-11-24 05:19:02 -08:00
Veera Vegivada
1d1f0d89ff
ARM: dts: msm: Add UFS support for SA8155
...
Add UFS host controller and UFS PHY (attached to embedded UFS card)
for SM8150 platform and SA8155.
Change-Id: I2f58f3bd2457fed0baaffa5233bbd2c92ec22c12
2020-11-24 14:01:41 +05:30
Veera Vegivada
67d4b4a46a
ARM: dts: msm: add interconnect devices for sm8150
...
Add stub interconnect devices for aggre1_noc, aggre2_noc,
camnoc_virt, compute_noc, config_noc, dc_noc, gem_noc,
ipa_virt, mc_virt, mmss_noc, system_noc, gem_noc_display,
mc_virt_display, mmss_noc_display. This will allow consumers
to get their path and set bandwidth constraints on them.
And add bcm voter devices that live under RSC devices
to allow interconnect providers to target their votes
for meeting bandwidth constraints.
Change-Id: I6c46d36928ecfbeaa5b568a61d3dfee9e9e0349d
2020-11-24 14:01:33 +05:30
Veera Vegivada
5e05c42789
ARM: dts: msm: Add clock controller and gdsc nodes for sm8150
...
Add support for all the clock controllers and also add
gdsc regulators.
Change-Id: Ic313db887845e43c1d69b82f6bd8af4154145832
2020-11-24 14:00:28 +05:30
qctecmdr
f4da5787aa
Merge "ARM: dts: msm: add MX entries to qcom,bw-scale for PCIe on shima"
2020-11-23 23:23:26 -08:00
qctecmdr
111f2bcd7d
Merge "ARM: dts: msm: keep PCIe in EQ Master Phase for at least 1ms on sdxlemur"
2020-11-23 23:23:26 -08:00
Sarthak Garg
6c782f4eca
ARM: dts: msm: Enable NAND and SD card for sdxlemur target
...
Enable NAND and SD card for all the boards available on sdxlemur target.
Change-Id: I17b3321bde161fbfbec8950d9893854912297ba9
2020-11-24 08:49:46 +05:30
qctecmdr
b97cdd1765
Merge "ARM: dts: msm: Add dummy clock nodes for MONACO"
2020-11-23 19:13:31 -08:00
Zijun Hu
dba69406a9
ARM: dts: msm: Enable bluetooth for sdxlemur
...
Enable bluetooth for sdxlemur.
CRs-Fixed: 2824381
Change-Id: I37762923eb49bfb3b3bbb19a5f088540f473f4e4
2020-11-23 18:43:01 -08:00
Zijun Hu
0c7191e1f9
ARM: dts: msm: Add label for bluetooth bootstrap pin EDL_MODE on sdxlemur
...
GPIO17 also drives bluetooth bootstrap pin EDL_MODE for sdxlemur, so
add a label for bluetooth.
CRs-Fixed: 2824381
Change-Id: I3779e8fa26e9a41b6a0a378b4ed97b7b985bd2c1
2020-11-23 18:42:41 -08:00
Ram Chandrasekar
b50c0db4e9
ARM: dts: msm: DDR cooling device no mitigation for lahaina
...
DDR cooling device right now votes for the lowest bandwidth when there
is no request from cooling device. Instead of voting to lowest level,
vote for zero bandwidth, so that it doesn't prevent sleep.
Change-Id: Ibf7895568f7c102bd4dc7267327b7decf45362e8
2020-11-23 16:06:53 -08:00
Wu Gao
d95d897fe1
ARM: dts: msm: Support CNSS WLAN device for sdxlemur
...
Support CNSS WLAN device for sdxlemur.
Change-Id: I152ecbd2064b63f15ea38cc300531371d4c0d925
2020-11-23 21:36:34 +08:00
Saurabh Sahu
43876698d9
ARM: dts: msm: Add dummy clock nodes for MONACO
...
Dummy clock nodes are required for clocks client to
request, so add support for the same. Also add the
dummy GDSCs required by clients for monaco.
Change-Id: I16e204fb2c04cbe750db25af4364a8af0b252404
2020-11-23 17:39:19 +05:30
qctecmdr
d2558bf2ce
Merge "ARM: dts: msm: Add missing memory map region for sdxlemur"
2020-11-23 03:49:18 -08:00
qctecmdr
fec81e9b29
Merge "ARM: dts: msm: Enable eMMC for sdxlemur target"
2020-11-23 03:49:18 -08:00
qctecmdr
1d9559f07e
Merge "ARM: dts: msm: add spmi_debug_bus for sdxlemur"
2020-11-22 23:40:44 -08:00
qctecmdr
24c5370e70
Merge "ARM: dts: msm: Disable PMX65 VBUS_DET on sdxlemur MTP-MBB and RCM-RC boards"
2020-11-22 23:40:44 -08:00
qctecmdr
6f45296e08
Merge "ARM: dts: msm: specify thermal mitigation levels for sdxlemur platforms"
2020-11-22 23:40:43 -08:00
qctecmdr
8dd6512240
Merge "ARM: dts: msm: add gfx smmu node on yupik"
2020-11-22 23:40:43 -08:00
Sarthak Garg
c38bd24e6a
ARM: dts: msm: Disable scaling for SD and eMMC on sdxlemur
...
Disable scaling for SD and eMMC as for SD card the clocks were not
getting scaled properly.
Change-Id: Ic90f783ad141a9cb8e8bde10aacfd365aac3b3dc
2020-11-22 10:59:45 +05:30
qctecmdr
c2378f1850
Merge "ARM: dts: msm: Add ion heap for monaco"
2020-11-21 06:18:43 -08:00
Patrick Daly
3d99d4f10d
ARM: dts: msm: Add missing memory map region for sdxlemur
...
Correct the memory map to match version 1.
Change-Id: I2da959263e0d0805b75ecc78c79b76ffaa08f41b
2020-11-20 17:09:30 -08:00
Guru Das Srinagesh
e64f6ee14d
ARM: dts: msm: Disable PMX65 VBUS_DET on sdxlemur MTP-MBB and RCM-RC boards
...
On these boards, VBUS detection is through PM7250B, so disable the
VBUS_DET peripheral.
Change-Id: If408b620c296df6bf1fbfeafb96b3e720de83114
2020-11-20 15:12:58 -08:00
qctecmdr
a98054dd60
Merge "ARM: dts: msm: Add CDSP pil node for Yupik"
2020-11-20 07:39:57 -08:00
qctecmdr
cb1c6a5c5f
Merge "ARM: dts: msm: Enable SMMU and PSCI for scuba"
2020-11-20 03:39:33 -08:00
qctecmdr
152ce6a89f
Merge "ARM: dts: msm: Add LPASS pil node for Yupik"
2020-11-20 03:39:33 -08:00
nishant chaubey
c3ffae6e28
ARM: dts: msm: Reduce secure heap to 30MB
...
30MB memory is sufficient for fastrpc securepd usecase.
Reduce secure heap to 30MB.
Change-Id: Ic680bfb74ff6ac37925a2c9b4edae275acc9d260
2020-11-20 13:34:20 +05:30
Vishwanath Raju K
8059e46e26
ARM: dts: msm: Add ion heap for monaco
...
Describe the memory region reserved for the ion allocator.
Change-Id: I53ce5c36dc77909fdbd8e1b2b24bd7292e6ef728
2020-11-19 20:42:55 -08:00
Subbaraman Narayanamurthy
1afeacbe78
ARM: dts: msm: specify thermal mitigation levels for sdxlemur platforms
...
Specify thermal mitigation levels for sdxlemur platforms based on
the battery used. This is used to limit charging current when
thermal SW requests different levels through charge_control_limit
property in battery power supply.
Change-Id: I2fe6142f110701b47d9f9f467a02632b20f1d7bb
2020-11-19 20:41:24 -08:00
Vishwanath Raju K
8ed3454a43
ARM: dts: msm: Add initial v1 memory map for Monaco
...
Added initial memory map and created regured cma areas
for monaco.
Change-Id: I3355fa9b9ec9b95b658e8f252b238cde2294c7fa
2020-11-19 20:37:44 -08:00
qctecmdr
b233067d93
Merge "ARM: dts: msm: Add PMX65 die temperature channel"
2020-11-19 20:09:40 -08:00
Charan Teja Kalla
ae0a35bb50
ARM: dts: msm: add gfx smmu node on yupik
...
Add the SMMU devicetree node for gfx that can be used by the respective
clients for VA to PA translations.
Change-Id: Ib0894591aff1be8fcdf50b0d57f7533efc67350c
2020-11-19 19:16:41 -08:00
Subbaraman Narayanamurthy
56ea625240
ARM: dts: msm: add spmi_debug_bus for sdxlemur
...
Add spmi_debug_bus so that PMIC peripherals can be accessed via
debug bus on sdxlemur devices where the fuse is not blown. This
is useful for debugging.
Change-Id: Ica647e8eee31028d25363aec88dd102cc0780ab6
2020-11-19 19:15:13 -08:00
Subbaraman Narayanamurthy
a30957a4f3
ARM: dts: msm: update pm7250b devices for sdxlemur platforms
...
Add necessary configurations needed for charger, QG, PD_PHY
devices present on PM7250B to support sdxlemur platforms that
uses them. Since, it needs some VADC channels from PM7250B, add
them as well.
Change-Id: I065f1365b7278a92e0a8646a32e955d5e168c70c
2020-11-19 19:13:27 -08:00
qctecmdr
b43b71a957
Merge "ARM: dts: msm: Remove display clock as client for CX SDPM for SHIMA"
2020-11-19 14:10:16 -08:00
qctecmdr
b9fad12223
Merge "ARM: dts: qcom: Update skin and cx thermal config for HOLI"
2020-11-19 14:10:15 -08:00
qctecmdr
35fbd3ae3c
Merge "ARM: dts: msm: Update PCIe PHY settings to v1.02 for sdxlemur"
2020-11-19 10:34:31 -08:00
qctecmdr
1a07d416ae
Merge "ARM: dts: msm: Add dmips and dynamic power co-efficient for Yupik"
2020-11-19 10:34:31 -08:00
qctecmdr
9705d86103
Merge "ARM: dts: msm: Include stub regulators for Monaco"
2020-11-19 10:34:31 -08:00
