In order to tackle the spurious interrupts coming from the host
on an invalid channel, the channel doorbell interrupts are
disabled during initialization phase. These are enabled after
receiving the start command for a particular channel.
Change-Id: I12bb315bcd249383ed442ad969e84c9eef25a324
Signed-off-by: Abhinab Abhinab <aabhinab@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
The change is to check for error code from cmd processing in case
of db pending cases, to avoid rd_offset increment.
Change-Id: If213297fe02ec1087bfab572f5af97b1e7bb5791
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Freeing cmd_ctx before ereqs will result into NULL ptr
dereference. Freeing memory in proper order.
Change-Id: Ie999017685574e940685eee3b7c205ebe1672664
Signed-off-by: Nitesh Gupta <nitegupt@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Channel interrupts are seen on device even before,
channel ring is initialized. Queuing pending work
without checking ring status can lead to processing
of spurious interrupts. Adding proper checks in place
before queuing channel doorbell.
Change-Id: I3ccd7302b535d2b8ef63eada9d7a1fe553dccdaa
Signed-off-by: Nitesh Gupta <nitegupt@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Device allocates ring memory during mmio initialization, this
causes 128 event ring elements to be created as MHICFG
register may not be updated by the host. This causes memory
to get exhausted leading to an MMIO init failure.
The Change is to allocate ring memory during M0, during which
MHICFG register is bound to be updated by the host.
Change-Id: I04a0e0ed79a46f16f96e2be4c5c68cba9ee2c99d
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Since pcidev_table is no longer used in the driver
get rid of the table entry from msm pcie device
structure. Also remove unused structure members
from msm_pcie_device_info. Since device table
is removed, rename msm_pcie_config_device_table
to msm_pcie_config_device_info.
Change-Id: I5359cc0f85d6b7f9f069f7decc3bc67105543abb
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
All endpoints and bridge are performing their config space save
and restore. Hence root complex driver does not need to perform
the same on behalf of them. For root complex use PCI framework
provided APIs to perform RC config space save and restore. Save
golden copy of the RC config space upon enumeration and use it
to restore RC config space in case of link down. Get rid of all
custom APIs for saving, restoring and dumping of RC and EP config
space entries.
Change-Id: I466e26aaaee0ae317323aae0c535c3319f95e681
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Add the support for user-space module to dynamically
enable or disable IPPT SW-flt lists based on ipv4 or
connection port number to decide traffic going to
ipa offload or not.
Change-Id: I2cfee479c7810a26746179de152281f336a3052d
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
This change will add support to vote for SMPS node if regulator
handle is provided in DTS source.
Change-Id: Ib370fd2fecfe04585cd2ab643f597714ead18a93
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
The EUD driver defaults to using INT1 for its interrupt mask.
However, certain targets don't use that interrupt for signalling
the apps processor. To remedy this, look for the interrupt-mask
binding in the device tree entry, and, if present, use the offset
there instead of the default.
Change-Id: Ib2db82c64d21a650044163b7322bc66ffe159d36
Signed-off-by: Melody Olvera <molvera@codeaurora.org>
Add a new property to indicate power's state when sleep.
Change-Id: Ic54fbbd0adee8716ad0b2d892814f8ac38b683c5
Signed-off-by: Fei Mao <feim1@codeaurora.org>
skb_peek() can return NULL when the socket write queue is empty. This
causes problems when using tcp_for_write_queue_from_safe(), as this
macro
resolves down to "for (tmp = skb->next; ...", causing a NULL
dereference.
Fix this by indicating that the tcp send queue head can not be coalesced
as there is nothing in it. This fixes the following:
Unable to handle kernel NULL pointer dereference
pc : tcp_write_xmit+0xe1c/0x1210
lr : tcp_write_xmit+0x38/0x1210
Call trace:
tcp_write_xmit+0xe1c/0x1210
tcp_tsq_write+0x110/0x140
tcp_tasklet_func+0x120/0x170
tasklet_action_common+0xec/0x128
tasklet_action+0x20/0x28
By ending the MTU probe because of the empty send head.
Change-Id: I0c3283c37ee69a4941c8d9e88519e586c7905d25
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Kaustubh Pandey <kapandey@codeaurora.org>
Use synchronous wakeup interface to wakeup the userspace daemon. Scheduler
can make use of this hint to find a better CPU for the waker task.
Change-Id: I7d077235f9b8fe771869dd7e6fccee7d356d858b
Suggested-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Pradeep P V K <pragalla@codeaurora.org>
The synchronous wakeup interface is available only for the interruptible
wakeup. Add it for normal wakeup.
Change-Id: Ia4460aa55690d14d203cdc843bd600c9e26c53f1
Suggested-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Pradeep P V K <pragalla@codeaurora.org>
Avoid deadlock scenario when wake interrupt arrives at enumeration
time and holds recovery lock and wake handler workqueue tries to
acquire enumeration lock. In parallel client driver can call
msm_pcie_pm_control for suspend where enumeration lock could
be successfully acquired by msm_pcie_pm_control instead by wake
handler and waiting for recovery lock which is currently acquired
by wake handler (which is currently waiting for enumertion lock)
which could leads to deadlock scenario.
msm_pcie_enumerate wake handler pm_control
| | (suspend thread)
| | |
| x acquired |
x acquired | recovery lock |
| enumerate lock | |
| o waiting for |
| enumerate lock |
x released x acquired
| enumerate lock | enumerate lock
|
o waiting for
recovery lock
we have fixed the order of locking in msm_pcie_pm_control to avoid
deadlock scenario.
Change-Id: Ifc72c643f7c0793cfa10a953723e953ce73a82b6
Signed-off-by: Vivek Pernamitta <vpernami@codeaurora.org>
'commit abc0fc15dcec ("block: Enable BFQ io scheduler as default")'
This is to fix the Native Daemon and Zygote Preload regressions
during bootup.
Change-Id: I4cfb40d0622319ce84d17fa409a4fcb5ab429dbc
Signed-off-by: Pradeep P V K <pragalla@codeaurora.org>
Currently support to enable/disable dplus hsphy irq and dminus hsphy
irq in case of resume/suspend is present only for pdc interrupts.
This support should be present even for non pdc interrupts if the
platform uses snps usb hs phy. Absence of this support leads to
dp/dm hsphy irq not being fired and usb stuck in lpm in host mode
eventhough there is a disconnect or remote wakeup issued from
hs/fs device connected to it. Hence add support to enable/disable
dp hsphy irq and dm hsphy irq for platforms that use snps hs phy.
On platforms which use snps phy and mpm interrupts, dp/dm lines are
directly connected to gic when cpu is active, mpm is involved only
when cpu is not active. Now in cpu active case, in host mode if usb
goes to lpm with hs/fs/ls device connected and unplug/remote wakeup
is issued, dp falling edge is monitored in software to detect that.
But gic is not capable of detecting a falling edge. Hence this
change adds support to program power event irq to wakeup the system
in this case. Note that gic takes care of dp rising edge wakeup
events like usb connect over otg when usb is in lpm and in host
mode. Only in case where dp falling edge is monitored i.e in case
of hs/fs/ls device connect and usb enteres lpm, then power event
irq is used to detect wakeup event as GIC cannot detect falling
edge.
Change-Id: I085b86c7df52daeedfb35cb71657c5163c2d5aaa
Signed-off-by: Rohith Kollalsi <rkollals@codeaurora.org>
Change is to queue pending_ring post updating CH db_pend
variable. This is done to avoid chdb_ctrl_work WQ from getting
pre-empted and pending_ring WQ executing.
Change-Id: I3504c89006c1231251be6efdfebac52b0fd35cc9
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Platforms using Synopsys SS phy are enabling pwr_evt_irq for
wakeup events in host mode as a part of dwc3_msm_suspend, but
before all the resources have been relinquished. So it is
possible that an IRQ is fired before dwc->in_lpm could be set to
1. Because of this, the pwr_event_handler will try to read
STAT_REG without issuing resume_work leading to unclocked access.
Fix this by enabling pwr_evt_irq only after in_lpm flag is set to
1, hence ensuring resume when the irq is fired.
Change-Id: I9772f427ecd10c2922c998cf0d57734362413051
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
With the current logic, MHI driver will hold channel
lock while processing the ring element and triggers
callback for the clients. Some clients are issuing
read requests for the channel in the callback context.
MHI driver will try to acquire the same channel lock
in read api leading to a deadlock situation.
Modify the logic to avoid holding channel lock
while processing the ring elements.
Change-Id: I62ac28d5eb06e3c9b12437f02288cfe1cdb2bea2
Signed-off-by: Nitesh Gupta <nitegupt@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Added a check for accessing in_use_list only in async case.
Change-Id: I842f9b9feb688d75152f7b2639c17c25c3376236
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
The change is to use req_lock spinlock during client release
and to use the same spinlock while checking for is_stale
during read/write completion callbacks.
Change-Id: I7ebafecb7503fa8521fa8f849cabf4b82bbc2f53
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Multiple clients might perform open and close file operations
simultaneously on the same file node created by UCI. To avoid
race conditions which might result in invalid accesses or crashes,
the open and close operations are serialized.
Change-Id: Ic6a290a2c6af25bcd60983a7b531bf1287201821
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Change is to prevent flush events being queued post channel close and
wait for pending flush event callbacks prior to channel close.
Change-Id: Ic168be0a187b3edcfeccedc565fb02673eaee883
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
The host can asynchronously reset the channel and this can happen when
there are pending ch interrupts to process on the EP.
The change is to prevent processing the old DB rung by the host by
adding delaying channel reset cmd ack.
Change-Id: I020a9961196867a7cc1ac8e4f309d0a75c38f6f5
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
The change is to prevent sending channel completion events,
post a channel stop or reset command.
Sending a channel completion post reset can cause the RP
to in reset value and hence the completion will be treated
as an out of order event.
Change-Id: I2cdd7a705a001689609ff8fa1f31fe11d61e5ea8
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Set the channel attribute for QRTR channels (MHI_CLIENT_IPCR_OUT
and MHI_CLIENT_IPCR_IN) so that QRTR client gets the uevent
broadcast when the channel state changes. Change the naming
for the structure to mhi_chan_attr_table since kernel clients are
also configured using the same structure.
Change-Id: I40232a09c27d7410d772055448d0354fb0c359b1
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
On blair some current leakage is seen wrt to vdd_px2 pads.
Pad team recommended to update bit 15 of TLMM_NORTH_SPARE register
which is mapped to core_ie bit of SDC2 pads to avoid this leakage.
As per blair TLMM HPG, recommendation is to write 0/1 to
TLMM_NORTH_SPARE register before turning off/after turning ON vdd_px2.
Change-Id: I7aaecd93de86f5d5b9af57656ac85e36b2d519fb
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
