Add the tx_status enum in wlan_logging_sock_svc.h so that
enum can be used for MGMT TX status mapping in wma_mgmt.c
Change-Id: I5681e6fcc39704b6be18bc68b1042e0e6b53f590
CRs-Fixed: 2491787
With the addition of the pdev restart command to handle multivdev restart,
a placeholder is required at the mlme to hold pdev restart attribute.
Change-Id: I885bf71d0e7977452120714a659e839769ade33e
CRs-Fixed: 2492531
While processing stats event there is an invalid debug
log which is always getting printed and resulting in
confusing loging.
Remove this invalid log from the stats event handling.
Change-Id: I5c60bf73b6b01afce82ebf93e19254f6e302042f
CRs-Fixed: 2493076
Currently vdev response start timer logic is in
target_if layer and stop timer logic is in tgt
layer which is asymmetry.
So, move stop timer logic from tgt layer to
target_if layer for vdev start, stop and delete.
Change-Id: Ia06e2e6d90cf9c4366d654e016e2eeab8c2a0719
CRs-Fixed: 2442199
fix memory leak issue in tx mgmt ctrl payload tlv.
if any of the mgmt or pkt capture feature is turned on.
htt_t2h_msg is hold in mgmt_buf and not set to NULL on free.
which cause leaking next target to host nbuf.
Change-Id: I0d9e0194e51a21b348aadf747b8c9def5c245eda
Reduce the excessive loging incase dup detect and advance rx processing
to handle next ring entry.
Change-Id: I1d6e8aa28045ed12dd6d315169483ca56d2c6972
CRs-Fixed: 2489205
Use CONFIG_WMI_BCN_OFFLOAD instead of CONFIG_MCL to
include wmi_unified header file.
Change-Id: I0cc7a4958700c82c7d3e55c965ccac2451b64fd3
CRs-Fixed: 2490681
Remove note section from code comment and placed
in commit description for better readability.
Macro for sending data packets Changed from macro function
to static inline function due to error reported by
checkpatch for multiple use of same variable.
Change-Id: I0752cfff7502fabe0c2351a21a94cfac4625278f
CRs-Fixed: 2490594
Use proper macro instead of config_mcl to compile
the API target_process_bang_radar_cmd.
Change-Id: I3a2fca998d69f2a29243b9ecd2a290af9602d6c2
CRs-Fixed: 2490649
Deliver RX data to stack even if no peer found, this is
needed for LFR roaming case like eapol data.
Change-Id: Ic81f29993fb4542847bd076042a13de6e9f18173
CRs-Fixed: 2468082
Replace void * tgt_if_handle of objmgr psoc/pdev with
abstract type handles provided by target interface
Change-Id: I9e0ae991776daa0c25c4ad7b4e4dc022441318a3
CRs-Fixed: 2482708
Kernel maintains a list of bss and it adds/updates the bss
entries whenever driver informs it. When driver receives
beacon or probe response from any ap it informs kernel to
update the bss list and whenever it disconnects with the
AP driver unlink the bss in the kernel.
If the AP is hidden, when driver gets beacon from this
hidden AP it informs the kernel to update the bss list.
kernel add this entry to it's bss list with NULL SSID.
Now when driver receives probe response from this hidden
AP it again informs the kernel to update the bss list,
as this is probe response and ssid is not hidden,
kernel treats this entry as new entry and adds it to
its bss list and links this entry to the older hidden
AP entry (But still these are two entries for hidden AP).
When driver gets disconnect from the AP it unlink the
bss entry corresponding to this AP from kernel's bss
list, but since there are two entries for the same AP
as the AP is a hidden AP, driver should clear hidden AP
entry (Which was added as part of beacon) which is
not happening currently.
Now when AP moves from hidden to broadcasting SSID
in it's beacon, kernel drops this beacon entry as its
confusing because there is already a beacon entry with
hidden bss for this AP. During connection driver tries
to update the entry in the kernel and it fails as kernel
drops the beacon resulting into the connection failure.
To resolve this issue, whenever driver unlink the bss
entries from the kernel bss list unlink the hidden bss
entries also from the kernel's bss list.
Change-Id: I629475db8e8f10a6bc403314a984939e38d0a4da
CRs-Fixed: 2488955
As a part of regulatory update #29,MKK17 should support channels
until 5730MHz(including channel 144). But, it was missed in
regulatory update #29 and MKK17 supports channels only until
5710MHz(until channel 140).
Add channel 144 to MKK17.
Change-Id: Ic4b4c162f03a033b697764d65f4733b49e00c9c8
CRs-Fixed: 2489544
On MCL side, crash_on_send_peer_rx_reorder_queue_remove_cmd
causes a crash if command is sent by host. Currently no one
is using this API from MCL side and for non MCL this is No-OP.
Removing this API and CONFIG_MCL as from MCL side no one is
calling this.
Change-Id: I5393074913ccd6b39ca2e31e081783c4b614bd43
CRs-Fixed: 2490819
Idle restart needs to prevent system suspend and hence, add new
reason code for idle restart.
Change-Id: I15f7be551f00bd910a61080c087a8f85dd2fe7da
CRs-Fixed: 2490992
The host driver serialization module currently supports upto 4
commands in non scan pending queue. This is calculated at the
wlan_serialization_vdev_create_handler() as:
max_pending_cmds = (WLAN_SER_MAX_PENDING_CMDS /
WLAN_SER_MAX_VDEVS)
But in SAP case, if multiple STA sends deauth at the same time,
4 pending commands in non scan pending queue is not sufficient
and will result in only disassoc from the first 4 STA getting
honored.
The current host wlan driver supports 3 SAP mode and
2 STA vdevs amounting to a total of 5 vdevs supported.
So calculate the total non scan pending commands for
serialization based on the total peers supported for each
mode to fix this issue.
In SAP case, maximum 32 peer are supported and for STA case,
maximum 4 pending commands for serialization. So change the
max pending commands calculation as:
max_pending_cmds = (No. of sap modes supported * 32) +
(No .of STA modes supported *4 )
For MCL case the definition of WLAN_SER_MAX_PENDING_CMDS
will be moved to Kbuild.
For WIN case, the existing maximum count will be retained.
Change-Id: Iff1d9430b45e26812b600560b08e85e6040eafef
CRs-Fixed: 2483520
Change Idbde9d70c64bc131813f5789c0453c9b3736228b has added
a logic to parse a string to uint16 array, there is no test
case written for this in unit test case infrastructure.
Add a unit test case to verify the logic written with the change
Idbde9d70c64bc131813f5789c0453c9b3736228b.
Change-Id: I38d6a0d6003807de7f5ec654926bd75da8b0996c
CRs-fixed: 2478274
Initialize type specific data in process_tx_info
while processing full tx pktlog messages.
Change-Id: Icbdd20e7e4604f117912e5a4402f7aa5048e671e
CRs-Fixed: 2468471
In wifi_pos_parse_req(), payload sections of nl attributes ATTR_DATA and
ATTR_META_DATA are type casted to driver internal structures tAniMsgHdr
and wifi_pos_field_info respectively without validating payload lengths
which can lead to buffer overread if the payload lengths are less than
size of internal structures.
To fix this, avoid type-cast and return error if payload lengths of nl
attributes ATTR_DATA and ATTR_META_DATA are less than size of tAniMsgHdr
and wifi_pos_field_info respectively.
Change-Id: Ie9e3197f2cd3852b394e834991aa8d3a5b530d85
CRs-Fixed: 2471275
The existing hex dump API dumps hex data only.
Add API so that the ascii data can also be
dumped along with hex dump
Change-Id: Icbe74b26f47601a249e3d7ac701f2a19d70fb83b
CRs-Fixed: 2464738
Reducing the log level of debug log to avoid console logging
and instead get it on the cnss diag log.
Change-Id: Ie5a1eb6f45ffa97790d91528a173b16319ec760b
CRs-Fixed: 2486057
Check if host is reaping a descriptor which is
already reaped then drop RX desc processing instead of asserting.
Macro DUP_RX_DESC_WAR added before dp_rx_dump_info_and_assert function
which does not assert for the case WAR is enabled.
Change-Id: I4f3c1cc16de79f2483cd415582970e093e81d465
CRs-Fixed: 2486057
Defines QDF APIs for abstraction of cpumask_clear, cpumask_set_cpu,
and cpumask_setall.
Change-Id: I1678c600c7043b1d4a19e0479ceab9af0ce83d01
CRs-Fixed: 2478893
Remove CONFIG_MCL for Beacon buf send WMI command APIs.
And move them under WLAN_WMI_BCN.
Change-Id: Ie5053334bd7498cb9dd84dbc515ffd3414a4ad32
CRs-Fixed: 2483567
Target firmware Assert are at times related to Host Driver
interaction with the firmware. To debug these issues, host
driver dump is mandatory. The feature provides memory dump
of data structures registed with this framework. The dumps
are saved which can later be loaded using gdb and analysed.
Add apis support for the feature.
Change-Id: I41c5126a49a698969f24b17187f78f4b4db7a51e
CRs-Fixed: 2478139
Enable TLV support for vdev delete all
peer request which will replace individual peer
delete of peers under a vdev during vdev down.
Change-Id: I777bd3dfb4ed8d8493456d3a0fbc90edd8fc75a2
CRs-Fixed: 2477601
Add API to support cancellation of a non-scan command to match with the
vdev and is a non-blocking serialization command.
Change-Id: I31556ea8f35b9caf314f10eba0f0f655e3fce806
CRs-Fixed: 2481935
Update regdb with QCA regulatory database version 29 with following
changes:
1) Create new full RD Def: APL9_MKKC and change Korea Country mapping to
APL9_MKKC.
2) Change APL9 to CTL Region MKK.
3) Change APL9 power to 23 for all 5GHz subbands.
4) Create new 2GHz RD Def: KRRA and Full RD Def: APL9_KRRA.
5) Create new MKK17_MKKC for Japan: Same as MKK5 but with added
channel 144 (Japan country code remains mapped to MKK5_MKKC for now).
6) Change Japan MKK5 lower bands to "indoor".
7) Change Canada in LA country table to FCC6_FCCA.
8) Change Georgia to ETSI1_World.
9) Change Dominican Republic to FCC3_FCCA.
10) Change Kenya to ETSI13_WORLD.
11) Change Kazakhstan to MKK5_MKKC.
12) New Countries added Aland Islands, Andorra, Antigua and Barbuda,
Cameroon, Cook Islands, Falkland Islands, Faroe Islands, French
Southern Territories, Georgia, Guernsey, Heard Island, Holy See, Isle
of Man, Jersey, Montserrat, New Caledonia, Niue, Norfolk Island, Saint
Helena, San Marino, Sao Tome, Sint Maarten, Svalbard, United States
Minor Outlying Islands and Virgin Islands (British).
Change-Id: Ic64ac96fa3e0828f628fecced66297ce176b3d3a
CRs-Fixed: 2475613 2454185
Currently, driver sets BSS peer and self peer to NULL
only in case of PEER AP/GO. It nither set BSS peer nor self peer
to NULL for GO/AP while de-attaching peers. This results in bss peer
use after free issue while stopping soft AP.
In order to fix this issue, the driver should set bss peer and self
peer to NULL for GO/AP as well.
Fix is to set bss peer and self peer to NULL for both PEER and AP
cases.
Change-Id: I055573c062c5a4e71fef2a699131e10fb6d97d71
CRs-Fixed: 2488371
