VA macro in Kona has three DMA TX ports. Add a new VA
DMA TX CPU DAI in the DSP DAI driver to use it on Kona.
Change-Id: Ic144dbed1bd63af6f0150f854fdb74d57e156839
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Invoke swr device down callback to set soundwire master
to reset state before setting ssr down flag. This is to
ensure master is reset to proper state after ssr/pdr.
Change-Id: Ifb5548f603ac03b772006314f4723c0ac0176928
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Hold system suspend when hardware wakeup interrupt is
received to resume soundwire master.
Change-Id: I99a58aa7d28cfa514d72bacc8c6fc6e95fbe038a
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Do bank switch to default bank during ssr/pdr as master
is reset to default state. This avoids wrong state of
swr master during pdr.
Change-Id: I86a7bd53d471e9d864d25dcb84ad8fe12151cc0d
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Reset swr only during init or ssr-pdr scenarios.
Do not reset swr during clock stop, which would
result in bad state of master and cause error
interrupts.
Change-Id: I88e071921409a5b5797aeedb8e7cb57cb5d5bb9a
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
ADM open is failed due to payload size not getting updated
with ec reference size. Update EC reference port only if
EC reference channels are configured.
Change-Id: Ic2dd6a3cf805c1ea40d71d0b62b6e867167d169e
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
TX_CDC_DMA_TX_0 supports three channels, therefore it
can be used for rx_macro_echo. Add required backend dailink.
Also remove AMIC4 from ignore_suspend as it is not used for talos.
Change-Id: I74b7adca9fa4001866232c1a9173e865c2a169c4
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Correct name of widgets for tx macro from
TX SWR_MIC to TX SWR_DMIC. Also assign codec pointer
to rx_priv before calling rx_macro_init_bcl_pmic_reg.
Change-Id: I268d79413c53bcd2d8e7a391859b71b7a7e3f64e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add mixer control and routing to enable echo reference
for rx_macro.
Change-Id: Ic1095eaa8024f2cb61722609daae94bc645b263b
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Mono headsets have only one channel connected. Hence make cross
connection decision based on the voltage result of alteast one
channel showing cross connection.
Change-Id: I22a4ea7e25d09e785e7141f4a74c2830fdff555e
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Update QUAT and QUIN TDM slot configuration
and mapping information for A2B support.
Change-Id: I17a4019f961846477f880cb2a59bc4c8f4c2fe28
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Update the register names and default values to
be same as the software document of codec.
CRs-Fixed: 2334177
Change-Id: Iec3ce76dceb44cef64c1f38a6cd75cb40ee2a539
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Handle PDM watchdog interrupt. Enable watchdog
before analog PA is enabled and disable it
after analog PA is disabled so as to prevent false alarms.
CRs-Fixed: 2336526
Change-Id: I3c16a9dcd0f4f84bf8ad0bfde9560330c143cdf9
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Reduce the amount of time driver waits to get a response from ADSP.
Current wait time in some cases is 5 secconds, which might cause
user space crashes in Android P. So reducing the timeout to
1 second.
CRs-Fixed: 2318751
Change-Id: I6b6789aa5b408659dd57f8f6b017df52d14b28aa
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Do not disable wake irq during registration of
wake up interrupt as it leads to multiple disable
calls of wake irq during boot up and headset detection
fails sometimes.
CRs-Fixed: 2356299
Change-Id: I79aa0ab46d26dc0e352d399e0d4381a11ed936f4
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
MICBIAS is always set to 1.8V. Change this voltage
depending on dt value for respective micbias.
Change-Id: I8eb1e71ae0256423bfd0bcc8ba2cd6bcc4a5ee61
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
In SSR/PDR, return ENETRESET errno to
propagate this failure to userspace. After
audio HAL receives ENETRESET, it stops retry
for pcm_open continuously. Rate limit the logs
when apr send packet fails during PDR/SSR
usecases to avoid watchdog timeouts.
Change-Id: I03a80aef6ffedb4f15f953fff5213d6a3c9efc4b
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add FE dialinks to enable multi compress capture
sessions on sm6150 target.
Change-Id: Ib26fc6c84d7993c34725a3b67596d4f059aa286e
Signed-off-by: Md Mansoor Ahmed <mansoor@codeaurora.org>
Dmesg logs are getting flooded with WSA temparature
logs. Change the log level to pr_debug to get rid
of this messages.
Change-Id: Ia4ccca47c5e6e5d56883ff73e1ae4278ff855be3
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
If the optional commands/registers in soundwire slave(s) are not
implemented, then soundwire bus will ignore the corresponding
commands and executes the next commands in queue.
Change-Id: I24dd929975218a150717f03f5c17c2be173a5005
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Send the kona platform specific soundwire port configuration
to the soundwire master driver through machine driver.
Change-Id: I1144d00b6bd430f330833141e681dcc93bfff9d2
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add common front end and back end dais.
Add TDM, AUX PCM and MI2S dais.
Change-Id: I3ecbe10ea9246aadedd02a881c937ce69f33cbbe
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
