when in COM, pd will trigger hard reset to let source send source_cap.
But pd hard reset will closed vbus and re-enable vbus by adaptor, so usb
present will return 0 to let COM shutdown. But typec mode is always on,
so use typec mode to workaround it.
Change-Id: I7f39cfd81e6cf2607103579d3cab58102aaabc40
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2168221
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1. Fix the build issue on Androd S
2. Support externel USB power supply for charger input detection
3. Support battery fuel gauge power supply to query battery status
4. Register the charger to mmi charger driver architecture
Change-Id: I852a176657964b4a8914176333171c0ab6d81b51
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2168097
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
After the VDD is powered on for more than 1ms ,
The RST is powered on
Change-Id: I7c49dc6cbaab0a9dee0ae8642a9de13db971f51b
Reviewed-on: https://gerrit.mot.com/2167042
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: <leiyun@wingtech.com>
Reviewed-by: Lijun Chen <chenlj2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
battery ntc is on the board,so battery temp is error in factorymode testing
it doesnot test quick charger in moto-factory mode when battery is error
set battery temp to 25 in moto-factory mode
Change-Id: I230edcfa1118b303561d21ce2b16e1fab92e298f
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2166164
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
battery ntc is on the board,so battery temp is error in factorymode testing
it doesnot test quick charger in moto-factory mode when battery is error
set battery temp to 25 in moto-factory mode
Change-Id: I2a6ed72e3124acba68c9051a1956d6f69d48370f
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2166154
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Add watchdog_cpu context and tzlog dump support
For 5.4 or later kernel, there is no way to browse the
Symbols without breaking the GKI rules
So read the ttbl1_el1 to get the init_mm->pgd instead of
The old symbols browsing
Update module dependencies
Change-Id: I26aca73f4a879f9504ecd5443c458e154cf48fe9
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1975101
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
WHY:FPS sensor will be overheating due to impact damage to FPS
WHAT:Enable power gpio in Chipone FPS driver so that it can disable power
when overheating.
Change-Id: Ie32e69870cbcc53f6fafd97ac0068f79b66afbaf
Reviewed-on: https://gerrit.mot.com/2166844
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
add build control for focal
support DRM screen status interface
Change-Id: I9a5ead1b52a2a287785cf0db38cceeb08c206623
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2163372
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
TP:
1. Open the esd check function,when the touch IC dies, it can be
restored to normal by hardware reset.
2. Increase the delay between the stylus command and the clock to
prevent the IC from hanging up.
Change-Id: I20617d63c0d53d60d1100b9eb26182096c657b16
Reviewed-on: https://gerrit.mot.com/2164520
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Batt switch state can be more reliable from boot with charger when
reading main batt voltage_now to compoare to batt2 through R-balance.
We'll monitor both v_now & v_ocv, but use ocv for the battfet swtich
decision.
Change-Id: I60cf8d0dfb5befbb029477644efed88e0342cef1
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/2143291
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
For the minidump region of mmi_annotate, should record volatile memory
instead of persist memory when platform doesn't support persist memory.
Change-Id: I94afe0b8ff5eda3686e2957f00747a4cb4582a89
Reviewed-on: https://gerrit.mot.com/2160648
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
set
short index
Change-Id: I71e53f871946b152db8a0a68f8f167ced13cb702
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2159319
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
TP:
When the screen is off, the TP driver starts to read gesture events
after receiving the interrupt.But I2C bus is still in the suspended
state, so gesture events cannot be read out.
geni_i2c_xfer System suspended
[GTP-INF][goodix_i2c_read:82] I2c read retry[1]:0x10308
geni_i2c_xfer System suspended
[GTP-INF][goodix_i2c_read:82] I2c read retry[2]:0x10308
[GTP-ERR][goodix_i2c_read:87] I2c read failed,dev:5d,reg:10308,size:26
[GTP-ERR][gsx_gesture_ist:236] failed get gesture data
Change-Id: If3ebbc4b65829def142835c51816b70e0a474865
Reviewed-on: https://gerrit.mot.com/2158726
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
FOD will turn on/off frequently, msleep will take longer delay than
expected, use mdelay to optimize the power up time.
Change-Id: I9c4d23f0c3b98713eeee7bb1393106ebac507af4
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2157879
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Adding a node to the power supply will affect the IIC timing,
adding to the IIO system file path is not fixed,
so add the node to the proc
Change-Id: Ib4842d6eaf37daf53e9c6bdb2a8f5d2a90694c38
Signed-off-by: huaqin87 <huaqin87@motorola.com>
Reviewed-on: https://gerrit.mot.com/2157051
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1. remove pm_wakeup on fg_update_work_func, becase update_work will be cancle
when the device into suspend.
2. Relax the unseal state determination criteria, and the unseal only determines the bit0
3. update Correct unknown error. about writing rt9426a_reg_swindows value,
moto did not use this function
Change-Id: I38e2acd5b11fb78e722b6cb86e192ac389057705
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2156775
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
when system suspend and then inserted charger, the system
can't wake up and update charger info.
Change-Id: Idb69dfc330b93d5929ce1b10b5c95491d6997aff
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2155893
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As in some case charging type detected error, so optimize
sgm41542 charging type detected.
Change-Id: Iad9608794ff0cf9116295037f6bacdfc1bdd619a
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2154824
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
This reverts commit c36e4a8eb858da064615bbfa7941312fe2d82c5b.
The node /sys/class/power_supply/QC3P/firmware_num that reads the 6670
firmware cannot be placed under the power supply,because the battery
service obtains information every 5s, which leads to the need to read
the version number every 5s,which will affect the bus timing on the IIC,
Which will affect the identification of the charger type
Change-Id: I0bbcc6419caf2e340a1ae6e951fe2bd32643b0a2
Signed-off-by: huaqin86 <huaqin86@motorola.com>
Reviewed-on: https://gerrit.mot.com/2154893
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ying Xu <xuying9@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
add qc3p charger type at bq2589x charger ic.
it will not charger icon if not have charger type
Change-Id: I950fd7e9fc9855f27174e58fce81a9e5c654f3c8
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2154583
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Submit-Approved: Jira Key
add qc3p charger type at sgm4154x charger ic.
it will not charger icon if not have charger type
Change-Id: I2c62c685a347dee2e35e3e8b545ac4d3e0a16941
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2154578
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Submit-Approved: Jira Key
don't report usb type before rerun apsd done, to avoid input current
limit auto changed to 500ma by charger IC.
Change-Id: If148bded78a3ae8a628353ca70c7fa15f2b1363c
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2154207
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As pd type can't equal to real_charger_type in discrete charging,
so need to add icl*vbus to report power max for showing turbopower
connected UI.
Change-Id: I16f4b559383f86eb38ec1b5e6cac09556d9dfada
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2154206
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
