Remove freeing of msg from helper function lim_delete_sta_util, since
caller of that will free the msg buffer at the end of function.
Change-Id: I2e0ee43dda9d5e30e86c4033eba934e4d7938887
CRs-Fixed: 1066025
There is a desire to remove unnecessary items from the default version
of WCNSS_qcom_cfg.ini that is shipped to customers. Currently the
default WCNSS_qcom_cfg.ini contains the following entries:
Intf0MacAddress=000AF58989FF
Intf1MacAddress=000AF58989FE
Intf2MacAddress=000AF58989FD
Intf3MacAddress=000AF58989FC
The associated default values within the driver are:
#define CFG_INTF0_MAC_ADDR_DEFAULT "000AF5898980"
#define CFG_INTF1_MAC_ADDR_DEFAULT "000AF5898981"
#define CFG_INTF2_MAC_ADDR_DEFAULT "000AF5898982"
#define CFG_INTF3_MAC_ADDR_DEFAULT "000AF5898983"
These are obviously divergent and should be converged.
Elsewhere in the driver, in hdd_update_tgt_cfg(), is logic to
auto-generate MAC addresses if no addresses have been configured.
This logic currently checking:
static struct qdf_mac_addr default_mac_addr = {
{0x00, 0x0A, 0xF5, 0x89, 0x89, 0xFF}
};
Since this logic is aligned with the values present in the default
version of WCNSS_qcom_cfg.ini, update the CFG_INTF*_MAC_ADDR_DEFAULT
definitions to match.
Change-Id: Ic34bc67cffad44b4d61cdfeb06776d0e3a63889f
CRs-Fixed: 1062967
Currently cfg.ini supports an "isAndroidPsEn" configuration item.
However this item is no longer in use, so remove the obsolete support
for this item.
Change-Id: I632513b5e6365a658bb02e0a47a40de94b04856c
CRs-Fixed: 1060747
Currently cfg.ini supports the following configuration items:
beaconEarlyTerminationWakeInterval
enableBeaconEarlyTermination
However neither of these is actually used by the driver, so remove the
obsolete support for these configuration items.
Change-Id: I41caec6697c0ff37efcf7db5dd7ab27ff2cdee95
CRs-Fixed: 1060657
Currently cfg.ini supports a "gFlexConnectPowerFactor"
configuration item, and this is used to override the
WNI_CFG_FLEX_CONNECT_POWER_FACTOR entry in the MAC CFG database.
However this MAC CFG database entry is no longer in use, so remove
the obsolete support for this configuration item.
Change-Id: I660a18a2663ca7ce29ca2c8bacf4a869de684ffb
CRs-Fixed: 1060643
Currently cfg.ini supports a "gEnablePhyAgcListenMode"
configuration item, and this is used to override the
WNI_CFG_ENABLE_PHY_AGC_LISTEN_MODE entry in the MAC CFG
database. However this MAC CFG database entry is no longer in
use, so remove the obsolete support for this configuration item.
Change-Id: I24a0dcf3d834ec794d88d16ca092ee25084183ce
CRs-Fixed: 1060636
Currently cfg.ini supports a "gNumRxAnt" configuration item, and this
is used to override the WNI_CFG_CURRENT_RX_ANTENNA entry in the MAC
CFG database. However this MAC CFG database entry is no longer in
use, so remove the obsolete support for this configuration item.
Change-Id: I8a8f7ca382262edee187013425fd41598783342c
CRs-Fixed: 1060626
Currently cfg.ini supports a "gEnableAutomaticTxPowerControl"
configuration item, and this is used to override the
WNI_CFG_TX_PWR_CTRL_ENABLE entry in the MAC CFG database. However
this MAC CFG database entry is no longer in use, so remove the
obsolete support for this configuration item.
Change-Id: I8ca653bc75c18692519ff1d88f52441e7f0375f5
CRs-Fixed: 1060597
Currently cfg.ini supports a "gEnableCloseLoop" configuration item,
and this is used to override the WNI_CFG_ENABLE_CLOSE_LOOP entry in
the MAC CFG database. However this MAC CFG database entry is no
longer in use, so remove the obsolete support for this configuration
item.
Change-Id: Ic8b7f4f522e910476273dd428bbb471a19cbe79f
CRs-Fixed: 1060579
Currently the qcacld-3.0 project contains a "sample" version of the
WCNSS_qcom_cfg.ini configuration file. This differs from the "real"
versions that are kept on a per-product basis in product-specific
projects. This has become a source of confusion since developers are
surprised when their modifications to the sample aren't reflected on
the product. Remove the confusion by removing the sample file. Folks
will then know they need to modify the product-specific files in their
product-specific projects.
Change-Id: Ia1b04ac431d3ae0e91d597bdfa6b8acfcd19d9e7
CRs-Fixed: 1065266
Interrupt handlers do not have valid process context and hence
current pointer is not valid for software/hardware interrupt
handlers. In WLAN log to user space API current process name is
logged using current->comm but hardware/software interrupts do not
have corresponding current pointer because they use current pointer
of interrupted process. Make changes to not to log process name when
log message is generated from hardware/software interrupt handlers.
Change-Id: I42420c501f9e7161112c5210909f83755ba4813e
CRs-Fixed: 1065898
In softap case DEVICE_IFACE_OPENED flag is not set/cleared when the
interface is opened/stopped(hdd_hostapd_open/hdd_hostapd_stop).
During the STA+SAP concurrency when the STA is turned
off, during the interface down it check's if any interfaces are opened,
if no interfaces are opened it starts the timer to close the modules.
Since the interface opened flag is not set for softap case the timer
is getting kickstarted and resulting in closing the modules even when
the SOFTAP is running.
To migitate the issue, set/clear the DEVICE_IFACE_OPENED in the adapter
even for SOFTAP.
Change-Id: I9e3f1391d92473d8a189d9fee6523ec3a7554c96
CRs-Fixed: 1065130
When FW wakes up APPS processor from power collapse it sends 120
bytes of payload piggy backed to wake up event handler. There are
some types of frames for which packet stats is not maintained.
Clean up log messages in WMA such that error message is not logged
to console.
Change-Id: I31d032874e5c9b8773a4e8d5067923c1dd20e23a
CRs-Fixed: 1065309
Send vendor specific TPC report IE as part of scan request IE to firmware.
This IE will then be included in probe request sent by firmware for scan.
Change-Id: I16e067de3980faa773d5027306795ca8e2a3c247
CRs-Fixed: 1062155
When receiving a power save request from user space, disable any active
power save timer and start a new one using the timeout supplied from
user space.
Change-Id: I88299776a973118e1bdba8cfd5fa4c8018f0758a
CRs-Fixed: 1065234
When coniguring NS Offload via Cfg80211, configure firmware NS Offload
to match via HDD.
Change-Id: I8d95be773ff29512ebb72a8eb5e9dddbc9e675dd
CRs-Fixed: 1064168
qcacld-2.0 to qcacld-3.0 propagation
In the current implementation, there is no log of instructions
set by framework.
To resolve this and understand the packet filters,
log of set instructions is added.
Change-Id: Ibe3c23de374261741f78a76c05c97b2342e9064e
CRs-Fixed: 1013062
Currently in wma_wow_wakeup_host_event, NDP WOW handler code is doing manual
pointer arthematics followed conversion to event tlv. This is duplicate effort
as necessary wmi event struct is already available. Remove this and directly
use wmi event struct.
Change-Id: I90da473d773781d007f4932d6ffbec389d5a2766
CRs-Fixed: 1058503
This is qcacld-2.0 to qcacld-3.0 propagation.
Change NDP_SERVICE_INSTANCE_ID from 16 bits to 32 bits
Change-Id: I4fab1af6d9b8e34396bb3679f112c7f29bbe9f93
CRs-Fixed: 962367
Fix below build error:
qcacld-3.0/core/hdd/src/wlan_hdd_softap_tx_rx.c:605:2: error: implicit
declaration of function 'cds_host_diag_log_work'
[-Werror=implicit-function-declaration]
cds_host_diag_log_work(&pHddCtx->rx_wake_lock,
^
cc1: all warnings being treated as errors
Change-Id: Ia1fe71abd783e24e91ae197db4a6b8fcc0b28ec7
CRs-Fixed: 1065872
When NS offloading is enabled, and we reach the maximum number of supported
addresses, disable NS offload so Apps can handle it.
Change-Id: I8312d5e8091cfbdc1f6e3e1e1093ae1dca0c096c
CRs-Fixed: 1063737
In sap_random_channel_sel function, new channel and channel width will
be calculated based on the available channels. New channel width is
populated to only new_chanWidth and this new channel width value will be
assigned to new_ch_params in wlansap_set_channel_change_with_csa.
This channel width from new_ch_params will be used as new channel width
on restarting SAP on Radar detection.
wlansap_set_channel_change_with_csa will get called only when radar is
detected when SAP started beaconing (after CAC wait).
If radar is detected during CAC_WAIT state, new_ch_params will not be
having new calculated channel width, it will be having zero, So during
this scenario SAP will be restarted with 20MHz bandwidth.
To fix this, populate new channel width to new_ch_params in
sap_random_channel_sel along with new_chanWidth.
Change-Id: If07f875dda3a4f6d29480c84b784ca7995c19c7f
CRs-Fixed: 1063038
(cherry picked from commit 714eb0a7fae9c4e50b1c52fa27001705991ab6eb)
Peer create is called before peer delete which
triggered assert at firmware.
Remove the duplicate peer entry before creating
a new entry for the same peer by serializing
the messages.
Change-Id: Ibf044df5271e9cd2fc3e869bb28d101d3ea9ad43
CRs-Fixed: 1052279
(cherry picked from commit fe914b42b15af00236e3db8e0d6c7d408c5bc4be)
As part of MBO(Multiband Operations), the Assoc IE's including
MBO IE need to be sent to FW as part of Roam Scan Offload command
so that these IE's can be used later in firmware initiated roams
Change-Id: Ia873c65a7813ae63d8e53d7445095990b0c2fed7
CRs-Fixed: 1039969
(cherry picked from commit 0af3520421400b65002604e0a3a9c7c714cc1e21)
qcacld-2.0 to qcacld-3.0 propagation
Due to race between user triggered disconnect and OTA disconnect,
On receiving OTA disconnect PE sends DISCONNECT_IND to SME and
waits for conformation from SME. By the time if SME already received
disconnect from user it will give PE DEAUTH_REQ instead of DIASSOC_CNF
messgae. Upon receiving this PE will do the clean up and will send
DEAUTH_RSP message. SME will also process DISASSOC_IND and will send
eSmeCommandWmStatusChange. But this will be in pending queue as user
triggered deauth is in progress as a SME active command. If this is processed
after user initiated disconnect command, HDD will get two disconnects which
cause mess up of eConnectionState_Disconnecting/eConnectionState_NotConnected
states in hdd disconnect handler.
Fix is to remove pending eSmeCommandWmStatusChange command after
DEAUTH_RSP from SME.
Git-commit: 7f0986129d00270d1b7bba3d671bba79ba323933
Change-Id: I004834785491ab7cf3e90371dfd1910c25d0bbef
CRs-Fixed: 1003374
(cherry picked from commit 2b4f56c8dcbc292391d705993c7cd874c3dea008)
Link speed is returning incorrect value.
Fix is to allow link speed only for P2P GO/Client. Return error
for other device modes, as link speed feature in FW is only
supported for P2P interfaces as it was implemented to support
Miracast.
Change-Id: I5747d9ebbcbac3ae1ebf69f261d721a96e22d53c
CRs-Fixed: 1063541
(cherry picked from commit 9327fc30217078d165f7be85a3fb277e9d09e669)
(cherry picked from commit a346e371732b5fc24f171a3bde4666e7950f3c01)
