Commit 7a6368ee0b ("msm: kgsl: Add support for the Adreno GPU") stopped
exporting the uapi header. Unfortunately not all the user-mode libraries
got the message. Start exporting it again to prevent breakage while
everybody figures out how to transition correctly.
Change-Id: Ic0dedbadc187d018b9ff34c0a93f156d525e8b16
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
This change enables spss_utils driver on Lahaina.
Change-Id: I3abddfc98ccc33dee46d0185faf518be8d1c5999
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
Allow printing unhashed pointers on Lahaina.
Change-Id: I474719268de201b731e83bbbd9d24cd54ec7e260
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Enable the QTI PWM LPG driver that configures PWM/LPG channels on
Qualcomm Technologies Inc. PMICs for clients such as LEDs.
Change-Id: Ic854b1b01b0769eccfc680fa961ed4107694ba28
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
The QTI PWM LPG driver supports the configuration of PWM/LPG channels on
QTI PMICs.
This is a snapshot of the driver taken from msm-4.19 as of commit
cf2cbb63fb60 ("Merge "input: touchscreen: synaptics_tcm: enable touch
driver"") with the following modifications:
- Remove config_extend callback and pwm_get_period_extend()
- Remove struct output_pattern and all its references
- Remove enable, disable and config pwm_ops callbacks and instead use
only apply()
- Remove output_type callbacks
- Remove support for dbg_show callback
Change-Id: I28571a8c6d5b0d5ac0cad113e77f3b5de8bf97c4
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Enable the MFD SPMI PMIC driver that adds support for QTI SPMI PMICs.
Change-Id: I22880f85882fdaa2315f281108ca9006cace0354
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Update QCOM clock debugfs to support the below functionalities.
- Display the register contents of all the clocks which support
this operation.
- Display the frequency to voltage mapping of a clock.
- Display the list of clock frequencies supported by the root
clocks.
- Display the clk_rate_max associated with enabled clocks list.
Also add the clock list_rate_vdd_level operation, which is required
for the "clk_enabled_list" and "trace_clocks" debugfs nodes to print
the current voltage.
Change-Id: I3b4cf83e776750d993d53331142223109bf0862e
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Update clock debugfs to support the below functionalities.
- Allow enabling/disabling a clock.
- Allow calling set_rate on a clock.
- Display the list of enabled_clocks along with prepare_count,
enable_count and rate.
- Add a trace_clocks node to dump the current state of all clocks
in the ftrace logs.
Change-Id: Ib67b3a3409c9e7d8adb710bb524f54f543abf712
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Introduce an Interconnect L3 driver to set L3 performance states
through EPSS.
Change-Id: I21ec587ae7750fb431048c3697a028c811a1dc6b
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Add a header for EPSS L3 interconnect nodes for Lahaina.
Change-Id: Iad6c18943fff3c0c84e85594671ec96ea6e3a507
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Add support in SPI QUPv3 driver to make it a DLKM.
Change-Id: Ic251466331862eb9a6e72455cac8ac4388b01045
Signed-off-by: Vipin Deep Kaur <vkaur@codeaurora.org>
Fix QCA_WLAN_VENDOR_ATTR_FREQ attribute ID to match the official
value from the QCA vendor command definitions (qca-vendor.h).
Change-Id: I549752fe5c29de5346cf9263ccc16266cafbbecd
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Prepare driver for FTM/AOA while unassociated.
1. Added attributes allowing user space to specify the frequency
where FTM/AOA peer is listening. When specified it will override
the entry in the kernel scan results cache. If not specified,
the kernel scan results cache will be used like today.
This gives user space location framework more flexibility - it
can maintain its own cache of peers, or perform scans less
often (since entries in the kernel scan results cache expire
quickly)
2. Remove associated check when starting FTM session, so session
can start even when unassociated.
Change-Id: Ib0ba52c506e1d8d59ab8c12043acd792405d69a0
CRs-Fixed: 1094147
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Added initial support for fine timing measurement(FTM)
and angle of arrival (AOA). These features allow a station
to get an accurate indoor location by measuring
distance (FTM) and azimuth/elevation (AOA) to one or more
stations/APs with a known location.
The following APIs are supported:
1. Get FTM/AOA capabilities, currently hard-coded for a
single-shot measurement to an associated AP.
2. Start FTM session.
3. Receive FTM results.
4. Start standalone AOA measurement.
5. Receive AOA results.
Change-Id: I54ebc1bdff6ed7d91644165b16eb0a4240069321
CRs-Fixed: 1057307
Signed-off-by: Lior David <liord@codeaurora.org>
[merez@codeaurora.org: fix compilation errors]
Signed-off-by: Maya Erez <merez@codeaurora.org>
[ailizaro@codeaurora.org: trivial conflict fixes]
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
[liord@codeaurora.org: fix conflicts, SPDX license]
Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
The function qcom_scm_get_sec_dump_state dereferences __scm without
checking for NULL and could potentially lead to a NULL pointer exception.
This scenario can happen if the clinet calls qcom_scm_get_sec_dump_state
before qcom_scm driver is even probed. Hence, check for NULL before
dereferencing it.
Change-Id: Ic6f7c2b2d616645ea69a8c594c90dc01d689637f
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
