Enable cpufreq hw debug support for HOLI and SHIMA.
Change-Id: I62b3404b918a738addeada83a1069712c55ebc21
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
New feature bit for MFHDR is added in binding file.
CRs-Fixed: 2770220
Change-Id: Ic0a0059df707dd51efce04b1892803ab8cbae0de
Signed-off-by: Vikram Sharma <vikramsa@codeaurora.org>
It is observed that interrupt handlers with same names across drivers
are being incorrectly mapped. Until this is fixed and to align the names
with the driver name, update the interrupt handler names.
Change-Id: Ib2aea77c0b0e53ff99c34fafc531a5291f70449c
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Consider a scenario where a connected PD partner has sent an
alert message to the device and driver marked send_get_status
to true and queued usbpd_sm work with a delay of 150ms. Now,
if the cable gets disconnected before the start of usbpd_sm
work then send_get_status flag will not get cleared anywhere.
On the next cable plug-in, in PE_SNK_READY driver will
unnecessarily send Get_Status again which is incorrect and
may lead to soft/hard reset causing the PD partner to disconnect.
Fix this by clearing the send_get_status flag in the protocol reset.
Change-Id: I4747b0a25a0870e83ff78e0b9ccd7e3fd91ed9e6
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
Add support for registering (and updating) suspend context in
minidump. This is helpful for cases, where suspend/resume
path is stuck.
Change-Id: I7ea9d4bcba85a4a0a2336279a3ffade918d1bd77
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
As cpus can serve ipis and timers during suspend and
resume; msm watchdog would periodically pet hardware,
even when some of suspend/resume callbacks are stuck,
due to software deadlocks. This can cause device hangs,
particularly when noirq callbacks are stuck. To recover
from this, register late suspend (and early resume)
callbacks in msm watchdog; these callbacks would
disable/enable watchdog pet.
Change-Id: Id12251f2bb6565b04a59802a53b6c3cadd017327
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Move suspend resume callbacks to syscore ops, to ensure that
watchdog is kept enabled while _noirq callbacks are run; to
catch any watchdog hang during these callbacks run.
Change-Id: I5ef61eb2ce2cd74a07847d6f5ff048a7b27b95a1
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Currently cpu's current stack are being dumped only in
panic path, which is not always helpful. So extend it to
be always dumped for any type of reset reasons.
For every task switch of cpu, update the minidump table with
latest stack. so that we can reconstruct callstack of cpu
for any type of resets.
Change-Id: Ia57a8e0473d3706efc9a88c91fb1dd60523648ad
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add support to update client's entry physical/virtual addresses,
which is useful for DLKM, dynamic address changing clients.
Currently, msm_minidump_add_region() returns 0 on success, instead
of that, return 'region number' of the entry in the minidump table.
So clients who wants to update their address in future, needs to
book keep their entry in minidump table.
Change-Id: I03abbbd87bf6d2e11cf637525412d352772821cf
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Adding fix to check the upper limit on the length
of the destination array while copying elements from
source address to avoid stack out of bound error.
Change-Id: Ieb24e8f9b4a2b53fbc9442b25d790b12f737d471
Signed-off-by: Tanwee Kausar <tkausar@codeaurora.org>
Register irq stacks, so that irq context is correctly
captured in minidumps.
Change-Id: Iabafe0464961a0c25164d66a186846290fbfcafb
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add support to send BIMC logging request to AOP using QMP
Mailbox Client during kernel panic.
Change-Id: I21f3c67496064a5ff70a890cdaadfff5ab39b002
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
Currently, Rconn value is read as unsigned, but
now signed value can be added, typecast it before
assigning it to variable.
Change-Id: If87adf2da724b5bbdef081018c59d52530c97f7b
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
On PM2250 the PBS sequence expects the battery-OCV
to output the right flash-boost output voltage. Provide
the same in a SDAM offset.
Change-Id: I9d43375d96de5a199c6a87c55e5c1079549b23ee
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Do not set BC1P2_START_ON_CC on detecting a DAM cable to
avoid a device brown-out.
Change-Id: I9192c6d2e89170585b98cbbaa8762aeffe66949e
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Userspace uses the CURRENT_MAX power-supply property to
determine the strength of the charger. In CC-mode of operation
the main-charger's ICL is configured low and hence the
CURRENT_MAX reported is lower attributing it as a weak-charger.
Fix this by reporting a fixed value of 1A during CC-mode.
Change-Id: Id8745b54c3909d01df69376a823396ea4c94eeb1
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Add support for typec class registration for
micro usb platform for switching USB composition from UI.
Change-Id: I13e87b4ab099dd5efa56b121da6be227c81f961d
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
WLAN host driver has new memory requirement in order to be loaded and
brought up interface. Increase prealloc table accordingly.
Change-Id: I44a394dd2c9e9636ec226ccb45fbf8ac6f30ddf3
Signed-off-by: Yue Ma <yuem@codeaurora.org>
During boot-up if the clock driver put across a initial high vote then
there is no way to remove these votes which can cause the corresponding
votes to be left always high till the CPU suspends causing power
regression. Thus introduce a device property which can remove the
initial votes from the clock driver and leave it up to the client to
keep a vote.
Change-Id: I068c87d06df908ee0ed0e58f69d46933b301ea6f
Signed-off-by: Taniya Das <tdas@codeaurora.org>
As the LN_BB_CLK3 clock is no longer required to be controlled from the
clock driver, thus remove support for the same.
Change-Id: Iffa05a87e9f2e2d3a92377fbd60a1ebf32c935e2
Signed-off-by: Taniya Das <tdas@codeaurora.org>
