This changes avoids device crash if Rf card is not present
in device.
Change-Id: I4b22ad0023a38e5b3ef49d6bf0e404b00c608115
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
Clear smp2p data during subsystem down to
prevent false smp2p notification to FW when
subsystem is up.
Change-Id: Iaa9a360e27a6e59d34ba9f02a28ce5dcf71ed0f5
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Currently usb driver is using 8 bytes request on interrupt endpoint
for all CDC functions. GPS host driver is expecting short packet/zero
length packet on interrupt endpoint and failing the transfer with 8 bytes
maxpacket. Increase the maxpacket size to 64 bytes so that host ends
the transfer with a short packet.
Change-Id: Icc9919fbd633468d3cc7d4d8ab1945730cdc7c06
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Add master and slave IDs for all Qualcomm Technologies, Inc. Monaco
interconnect providers which consumers can use to set bandwidth
constraints and find paths in the NoC (Network-On-Chip) topology.
Change-Id: Id2e816a74e382946c02345a5d1e39ed1d913ef90
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Currently lpm_suspend_enter and lpm_cpuidle_s2idle return
success always. This misleads on succcess and failure counts.
This change adds support to return correct value to caller.
Change-Id: I57dd0a4385f16f0e0aa1c92d602c0816ed358e2c
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
Refractor the OSM L3 driver to make it easy to extend for
other targets.
Change-Id: Id9e9ff3c2e9a299fcee8881c68f43649b866259b
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Driver enables GSI wrapper only if OUT EP is present in
GSI interface which is not the case with DPL function.
This logic works as long as there is another GSI function
present with OUT EP (e.g. RMNET/RNDIS). However, if ADPL is
the only GSI function in composition then driver does all
the EP specific programming in USB GSI wrapper but doesn't
enable it. Since, initial doorbell is rung by software, data
transfer does start but eventually stall happens as USB GSI
wrapper doesn't ring doorbell.
Fix it by not having an EP check while enabling GSI.
Change-Id: Ia40209d5a3f3b5947b13e8909ef9f994200f7a85
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
when suspend happen with empty OTG cable,
then insert USB 3 thumb drive,
after resume, thumb drive work in USB 2 mode.
currently in suspend function only disable redriver,
but no operation in resume function.
fix it by enable redriver during resume.
Change-Id: I57535dd24317cce77e40eb8ca30a2203af6776b0
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org>
Enable the interconnect driver so that consumers are
able to obtain their path handles properly.
Change-Id: I347133af37d660855532d08d23ef5750d93ff83b
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
In some devices we have 4 PCIe controllers. This change
enables the 4th PCIe controller.
Change-Id: I6a192b7595bd7ddf3d0ec1e80faf9e2ec1b6a5ac
Signed-off-by: Nitesh Gupta <nitegupt@codeaurora.org>
