Vdev delete will purge the serialization queue for the vdev.
If the hw mode change request is flushed without waiting for
the fw completion event, it will cause issues when the fw event
coming up later and no active serialization command in queue.
In one case, the “hw_mode_change_in_progress” is not cleared
in this condition. And finally causes the new Connection req
failed to wait for hw mode change event because there is no
hw change request actually.
Fix by check and wait for hw mode response if any hw mode change
is in progress.
Change-Id: I007643f48ff1d35fbdb2c9ca9a3127bbd66d7dec
CRs-Fixed: 2760395
Currently, primary frequency is getting updated from STA context
during get_channel callback. This is causing STA disconnect issue
after channel switch. This is because sta_context won't contain
updated channel information after channel switch.
Update primary frequency from object manger. Object manager will
contain updated channel information after channel switch. Also
update the primary frequency in STA context after channel switch.
Change-Id: I059c3627fbd2c254adeb4c7e4407b1518aa0f771
CRs-Fixed: 2758925
Move hdd_validate_context() after driver state check such that if
the driver is closed and fw is down, system suspend is not rejected.
Change-Id: Ie066cee2e50a683433e337523ab21a153c8e272b
CRs-Fixed: 2759166
When sta_sap_scc_on_dfs_chan = 0, SAP is not allowed to SCC
with STA on DFS channel. Check the SAP target channel DFS flag
considering the target channel bandwidth.
Change-Id: I321c1055574477fe39ca8569f24a4040c8dc1904
CRs-Fixed: 2756518
Parse vendor nl cmd twt_get_params, obtain the peer
twt sessions for given dialog id and send back to user
space via nl layer as a response
Change-Id: Ie4c6fc9b752f16e6eb1f873a3493b7d3d7f7d4a8
CRs-Fixed: 2744839
Enable beaconing for 160 MHz BW when all the channels
are non-DFS. Addition of new 5.9 GHz channels 169, 173,
and 177 has created a new 160 MHz BW channel bonding
pair (149-177) and beacons can be sent out from SAP
for this pair.
Change-Id: Ic2d85927fe75525839a1ccadbfae89efa37431d3
CRs-Fixed: 2751114
Currently wifi_channel_stats has cca_busy_time statistic which is
measured after excluding own tx_time but not own rx_time. By definition,
CCA busy time means amount of time for which channel is detected as busy
after excluding it's own tx and rx time.
Add support for tx and rx time in the channel statistics. This will enable
provision to calculate CCA busy time with including/excluding channel
tx and rx time.
Change-Id: I8e295ed4cd7b2ceca44b64140977603a4d8e8764
CRs-Fixed: 2732018
Add changes to define structure to hold the WMI_ROAM_SCAN_MODE
command related parameters.
Also added minor cleanup changes.
Change-Id: I24ef18e05de8dd05ee437e440651ea9ab0731e46
CRs-Fixed: 2758316
Add TWT vendor subcommand and TWT operations for
Host triggered TWT. Also add support for TWT Setup command
request and response.
CRs-Fixed: 2735650
Change-Id: I4f52c9fb240714077347ffc5177692de01a6a126
Enable RX LDPC capability by default in the
driver sinc the ini gEnableRXLDPC is not present
in the WCNSS cfg ini file.
Change-Id: I826dca94e0db18713b0d87581da07eeefbfc80d4
CRs-Fixed: 2748730
Add PLD layer support using which the platform driver sends
thermal state change notification to WLAN host. The callback
contains state variable to store the current thermal state.
Add WHUNT support to validate host implementation.
Change-Id: I5039eae967f940a7809a4b6e6d523362819fb28a
This change adds support to define vendor command policy for
QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET.
Change-Id: Ifef5a6c3518b58061928c493ede6511405a228e4
CRs-Fixed: 2758928
MAC address is of the format (XX:XX:XX:XX:XX:XX),
This feature is to hide logging 2nd, 3rd and 4th octet of the
MAC address in the logs.
To enable this feature set CONFIG_WLAN_TRACE_HIDE_MAC_ADDRESS to y.
For example, if this feature is enabled, then
mac address ae:45:9c:f1:c0:98 shall be printed as ae:**:**:**:c0:98
If this feature is disabled, then QDF_MAC_ADDR_FMT translates to
"%pM" and by default this feature disabled.
Change-Id: Ib4086c1390c3ecafa637616954939f7d2c9c0e5b
CRs-Fixed: 2752355
Currently for function call mapping dump, driver is using
info as log level, which results in log flooding on console.
To address above issue, reduce log level for function call
mapping dump from info to debug log level.
CRs-Fixed: 2755567
Change-Id: Ifd40823956dfa6cf65e66a20ee19efcfb1faaf5e
Sometimes frames are queued to dp_rx_thread wait queue
during WoW suspend in progress. At this time dp_rx_thread
is in SUSPEND state and these frames can't deliver to Linux
Stack, for ICMP case, if no other frames come to wake up
system, ICMP timeout will happen. Add a RX suspend check
in WoW to avoid suspend when frame comes before WMI_WOW_ENABLE
sends to FW
Change-Id: I3d37e6d6ce8f7f6edaf5f78bf5cef77bee6ed5c6
CRs-Fixed: 2755583
Enable AUTORFI-3223 LTE coex with remote telematics unit:
When Telematics unit (modem) is not located on the SOC as Wi-Fi chip,
the OEM's system can still get LTE channel info from the modem and
pass it to Wi-Fi driver from an OEM app. This request is to provide an
API from Wi-Fi layer to OEM's app to receive the LTE coex channels,
After wlan driver received this info, channel avoidance algorithm will
run and SAP will adjust Wi-FI channel accordingly.
Enable OS_IF API to receive channel avoid cmd from upper layer.
Use QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY to send channel avoid list
from app layer to wlan driver.
1. Need config unsafe channel list in regulatory modules, then notify
all registered modules: hdd/os_if and policy manager.
2. Use frequency instead of chan id in vendor cmd channel paramaeter.
Change-Id: I977634f35a32e21739f2627688483a07fed0b2f9
CRs-Fixed: 2750164
