Commit graph

5,576 commits

Author SHA1 Message Date
Rishabh Bhatnagar
bbca4b2f5e ARM: dts: msm: Change cpu frequency for V2 hardware
make changes to cpu frequency table for V2 hardware.

Change-Id: Ic8d75a2236d679e491fb3832d6246f1bfdc6d12a
2021-07-29 13:14:28 -07:00
qctecmdr
14f83d305f Merge "ARM: dts: msm: Add pm-qos-latency dt node for sdxlemur" 2021-07-28 13:53:56 -07:00
qctecmdr
1ff32915ee Merge "ARM: dts: msm: Enable link recovery for config space access fail" 2021-07-28 13:53:56 -07:00
qctecmdr
0ba9b147c8 Merge "ARM: dts: msm: Adding updated PHY tune parameters for blair" 2021-07-28 13:53:55 -07:00
l
3db08673c8 ARM: dts: msm: Add pm-qos-latency dt node for sdxlemur
Add pm-qos-latency which ensures that cpu is used to its full
capability,there by increasing ADB throughput.

Change-Id: I28284ca1425795987d89c39bf8ab6d7bfee5884d
2021-07-28 06:48:43 -07:00
Vivek Pernamitta
09a18915d6 ARM: dts: msm: Enable link recovery for config space access fail
Enable link recovery by notifying client driver when config
space read/write fails.

Change-Id: I6286b3c2e9b677c1b0de2c6e89fe7c434d355443
2021-07-28 17:13:52 +05:30
qctecmdr
8ccf9d8293 Merge "dt-bindings: pcie: Notify client for config space access issues" 2021-07-28 03:57:04 -07:00
Gopala Krishna Nuthaki
5908b12206 ARM: dts: msm: Disable Skin config rules for BLAIR
Disable Skin config rules of quiet-ther,pa-therm0 and xo-therm
based on latest recommendations.

Change-Id: I8f78f4fcd3619c38260b73bfaada01853e0cb47f
2021-07-28 00:28:13 -07:00
Vivek Pernamitta
846da1aa87 ARM: dts: msm: disable masking MSI interrupts at EP side
Disable masking MSI interrupts at EP side.

Change-Id: I4c7fb61890f65345a39ba81e34b90b9c0c5acc99
2021-07-26 20:29:10 -07:00
Rohith Kollalsi
6890562d35 ARM: dts: msm: Adding updated PHY tune parameters for blair
Adding updated phy tune parameters for blair.
This will ensure that qrd and mtp both have same phy
tuning values.

Change-Id: If286cc916c33a024ed53b04fd2aa153f7fbbc63c
2021-07-26 20:39:41 +05:30
Vivek Pernamitta
3ca2d633fd dt-bindings: pcie: Notify client for config space access issues
Notify the client driver to recover for EP config
space access issues.

Change-Id: I5567dbbdf58575954fb7caea05df2a3102825dc3
2021-07-25 05:00:03 -07:00
Pankaj Gupta
950940de07 ARM: dts: msm: Add support of 608Mhz GPU FMAX for yupik
Enable 608Mhz FMAX for yupik GPU as per speed bin requirement.

Change-Id: I480d419ece2fa6b10e51f05e262e4f67a51122a8
2021-07-22 15:33:05 +05:30
qctecmdr
7b48f53b9c Merge "ARM: dts: msm: Add device tree for M.2 USB mode on sdxlemur" 2021-07-21 09:07:14 -07:00
Michael Adisumarta
cf11989f58 ARM: dts: msm: enable LAN RX NAPI
Enable LAN RX NAPI.

Change-Id: Ic6a9939ba6d60118a47a2386e0651b3d5199eb98
2021-07-21 01:29:41 -07:00
qctecmdr
8114da3c39 Merge "ARM: dts: msm: Update mode threshold current of L6C of yupik" 2021-07-20 00:03:27 -07:00
qctecmdr
629e49d133 Merge "ARM: dts: msm: Update BCL thermal mitigation config for HOLI" 2021-07-19 03:51:11 -07:00
Jishnu Prakash
85fa372bd3 ARM: dts: msm: add ADC device instance for PMR735A on holi-pm6125
Add a SW-calibrated ADC instance for PMR735A on holi-pm6125
which can be used if there is a requirement to read any ADC
channels on PMR735A.

Change-Id: I8bff473ca2605a3601283865138dabf0589b903e
2021-07-16 16:17:59 +05:30
Jishnu Prakash
f21c29f371 dt-bindings: iio: qcom,spmi-vadc: Add SW-calibrated ADC bindings
Add bindings for SW-calibrated ADC used on PMR735A/PMR735B on
targets which don't have PMK8350 running in master mode.

Change-Id: I753b3caf1e52ac9920a9df32cbef465277409700
2021-07-16 02:50:24 -07:00
Priyanka Gujjula
e887f63a4c ARM: dts: msm: Enable cxipeak support for blair
Enable cxipeak cooling device node for blair
and holi-pm6125 variant.

Change-Id: Ib75a06f0619af0f749a95f5d275d16faa73579de
2021-07-14 10:38:18 +05:30
qctecmdr
7b66bcece4 Merge "ARM: dts: msm: Modify ss phy initialization sequence on sdxnightjar" 2021-07-12 23:03:05 -07:00
Rohith Kollalsi
f24281f489 ARM: dts: msm: Modify ss phy initialization sequence on sdxnightjar
Modify ss phy initialization sequence on sdxnightjar according to
HPG.

Change-Id: I02d46ed95145bd168f2fa799fbf0a5205ed6528a
2021-07-12 20:52:44 -07:00
Mayank Rana
4ead474736 Revert "ARM: dts: msm: Set qcom,rmnet_in_use_tcm_mem with RMNET composition"
This reverts commit e6a51215e9.

Change-Id: I0fb75abfd13064fe28af5962196a2171f0648cd1
2021-07-12 11:40:14 -07:00
Melody Olvera
8670db75e8 ARM: dts: msm: Add device tree for M.2 USB mode on sdxlemur
Add device tree files for M.2 USB mode on sdxlemur.

Change-Id: Ia52cea241defd4d2459bad90807c59eea79e0ad7
2021-07-12 10:05:59 -07:00
Manaf Meethalavalappu Pallikunhi
1ea6aa2b38 ARM: dts: qcom: enable cx ipeak lm separately for blair and holi-pm6125
Enable cx ipeak lm device driver separately for blair and
holi-pm6125 targets based on latest devicetree configurations.

Change-Id: I3326ac8760d5eef3d6e6ff118c4c8a1e3e52c659
2021-07-12 13:22:37 +05:30
qctecmdr
ba27686f2c Merge "ARM: dts: msm: add ntn3 ipa pcie changes" 2021-07-11 07:42:49 -07:00
qctecmdr
c3313f7768 Merge "ARM: dts: msm: update clk tput threshold for IPA on Olympic" 2021-07-11 07:42:49 -07:00
Abhishek Chauhan
f2548a9ecb ARM: dts: msm: add ntn3 ipa pcie changes
Update IPA iossv2 pcie configuration changes.

Change-Id: I22536d8ab315dcb968a331d468aedb4e5aab81a9
2021-07-09 21:58:06 -07:00
qctecmdr
fb84702db4 Merge "ARM: dts: msm: Mark PMIC QUPs as critical clock devices for BLAIR" 2021-07-09 06:01:39 -07:00
qctecmdr
4ecfc8af1c Merge "ARM: dts: msm: Add wdog bite IRQ for pil modem" 2021-07-09 06:01:39 -07:00
Madhuri Medasani
c640c89e05 ARM: dts: msm: Mark PMIC QUPs as critical clock devices for BLAIR
To prevent deadlocks between the clock and regulator frameworks,
the QUP clocks used by I2C-connected PMICs must be enabled all
the time and not registered with the clock framework. Skipping
the registration short-circuits the I2C device's clock calls such
that they return success before grabbing the clock locks. Achieve
this behavior by setting GCC's qcom,critical-devices property.

Change-Id: Idf812aa1df3a21670b8e9c262548cbf5f528e41b
2021-07-09 00:03:24 -07:00
Lijuan Gao
d7195645ce ARM: dts: msm: Add wdog bite IRQ for pil modem
Add wdog interrupt for pil modem.

Change-Id: I3cca2467edcadf66228d8604d014b564e1b36458
2021-07-08 23:55:31 -07:00
qctecmdr
64fb946027 Merge "ARM: dts: msm: Add disable L1 quirk in HS mode for blair" 2021-07-08 22:05:02 -07:00
Michael Adisumarta
862448a297 ARM: dts: msm: update clk tput threshold for IPA on Olympic
Update IPA clock throughput thresholds to support
higher IPA port corner frequencies.

Change-Id: Ib44d42b42b8b279d894ca3eab9a3ac6592965c99
2021-07-08 21:32:19 -07:00
qctecmdr
622bff3804 Merge "ARM: dts: msm: Add APPS_APM_STATUS register for blair" 2021-07-08 18:06:02 -07:00
Jishnu Prakash
fc0fcee3b4 ARM: dts: msm: Update mode threshold current of L6C of yupik
Update mode threshold current of LDO6C of yupik to match
the threshold value expected by the client for HPM.

Change-Id: I60536af368d124eca816067471ed53bce7abf453
2021-07-08 15:09:44 +05:30
qctecmdr
fbc8785f88 Merge "ARM: dts: msm: rename sound card for QRD blair" 2021-07-07 23:18:39 -07:00
qctecmdr
32c8f0c5d3 Merge "ARM: dts: msm: set need unvote flag 0" 2021-07-07 23:18:39 -07:00
Ashish Chavan
99a97972ce ARM: dts: msm: Add support to sync charger/qg probe with vadc
Observing probe defer and other related error to happen when
Charger or QG tries to probe before vadc. Fix this by adding
a dependency in DT for these drivers with "*-supply".

Change-Id: Ic4a7917a7aa84503dc9dcb8bc789768552077106
2021-07-07 20:49:31 -07:00
Paul Zhang
779a915c49 ARM: dts: msm: set need unvote flag 0
Don't unvote the cnss regulator.

Change-Id: Icbd4d8012a213c4e048ab1b06a900226a8e0e9fe
2021-07-07 19:35:07 -07:00
Gopala Krishna Nuthaki
ba58203972 ARM: dts: msm: Update BCL thermal mitigation config for HOLI
Update BCL thermal zone config with cdsp, gpu and modem
cooling devices for HOLI and its variants.

Change-Id: Iba8fa54af0948543527b4de0acc87cac0348be60
2021-07-07 15:19:19 +05:30
Kunlei Zhang
d288582932 ARM: dts: msm: rename sound card for QRD blair
Rename sound card to pick proper acdb files for
QRD blair.

Change-Id: I0840d0665a23e3098d3f81b32fedf33799488303
2021-07-07 15:48:21 +08:00
Madhur Rawat
377e67ffe0 ARM: dts: msm: Add APPS_APM_STATUS register for blair
Add APSS_APM_STATUS dcc debug register list for blair

Change-Id: I31d38cfd77d440691308db73a1df56b81c93c20c
2021-07-06 06:16:31 -07:00
Jishnu Prakash
bf7ae1b209 ARM: dts: msm: Correct #address-cells property for PM6125
Correct #address-cells property for SPMI SID 1 of PM6125
to ensure module addresses under it can be read correctly.

Change-Id: I5380640c061715be34f6afc24925d117b51e0b32
2021-07-05 20:57:10 -07:00
qctecmdr
5b95bb125e Merge "ARM: dts: msm: Enable QPIC display for sdxlemur" 2021-07-05 03:02:09 -07:00
qctecmdr
85784b165f Merge "ARM: dts: msm: Add FnR stats support flag for holi target" 2021-07-05 03:02:09 -07:00
qctecmdr
0be900019e Merge "ARM: dts: msm: Add interrupt mask offset for EUD for sdxlemur" 2021-07-04 21:57:40 -07:00
Praveen Kurapati
f7ef6a1a22 ARM: dts: msm: Add FnR stats support flag for holi target
Holi target dont support FnR stats. Add entry to specify.

Change-Id: I64298cc8f84ed9a3a6b03860aa9148676b1e4db7
2021-07-04 15:56:00 -07:00
Udipto Goswami
ec54e0be1e ARM: dts: msm: Add disable L1 quirk in HS mode for sdxnightjar
Some platforms do not support L1 in HS mode and therefore need
to disable this feature through dt.
This change adds quirk snps,usb2_l1_disable in order to
avoid this.

Change-Id: Ifcafdfc51cc294d07e08192d96185cb772f06c5f
2021-07-01 01:34:16 -07:00
Lei Chen
c46bac62d3 ARM: dts: msm: Enable QPIC display for sdxlemur
Enable QPIC display for sdxlemur.

Change-Id: Ifc44e77d350a41f82d5b1f4aa97adc882668b260
2021-06-30 23:54:10 -07:00
qctecmdr
26028dc301 Merge "ARM: dts: msm: Update spmi debugfs nodes for yupik with PM7250B" 2021-06-30 05:37:35 -07:00