On certain platforms host might take a long time to send M0
to device. Only modified msm files in this commit.
Change-Id: I8c5f07a7926e01afa84a983ef98721749787d2da
Signed-off-by: Siva Kumar Akkireddi <sivaa@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
On some customer platforms, resume from hibernate results in a
cold boot of the end-point. The previous mhi device state gets
cleared and this results in mhi host issuing a reset. Clear the
reset while waiting for M0 from host to enable host to proceed
with issuing M0.
Change-Id: I18aa4e760d59e37842a9f3a6dba1478a98137bb8
Signed-off-by: Siva Kumar Akkireddi <sivaa@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
mhi_dev_cache_host_cfg will be called during cold boot and also
when processing mhi device reset command from host. Do not re-allocate
the command, event and channel context cache memory if they have been
already allocated.
Change-Id: I55826e05b3d83c9fcf3d4b23e26b91253130671e
Signed-off-by: Siva Kumar Akkireddi <sivaa@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
If the devicetree property for aux clock is present run the clock
at 16.6 MHz. Otherwise default aux clock value to 19.2 MHz.
Introduced for PCIe Gen4 support but can be used in the
future if controller needs 16.6 MHz clock support.
Change-Id: I8a4b3ab4cbd44938f1c9bf8fa91a791ba289ee10
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Add the SCM call support for core hotplug and set warmboot address
for multi core.
Change-Id: I747858d1ffc1008b6d9033526110c98a3bb2401b
Signed-off-by: Raghavendra Kakarla <rkakarla@codeaurora.org>
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
This reverts commit 8a7d4fed84, reversing
changes made to bdf9093b71.
Change-Id: I6fbcfb72f49740223691f2e1edecbbfc28f420c5
Signed-off-by: Vinay Sudra <vsudra@codeaurora.org>
Add legacy msm pm sleep mode support for MDM9607 target.
Add warmboot set address support for multi cluster cpu's.
Snapshot is taken from msm-4.9 kernel version @ commit 078db469522464
("soc: qcom: bgrsb: Increase time out for RSB channel opening").
Change-Id: Ibfc56254c47cfc1465aff5559b8846072f66041a
Signed-off-by: Raghavendra Kakarla <rkakarla@codeaurora.org>
Signed-off-by: Haribabu Gattem <haribabu@codeaurora.org>
Signed-off-by: Raja Mallik <rmallik@codeaurora.org>
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
Compilation failed, due to updated function declarations lpm_levels
driver where the lpm_levels_legacy driver is not updated in parallel
Rectified all errors occurred during compilation for mdm9607 target.
Change-Id: Iacb6ce9949454a949bcba90a8e8285ca18b832d5
Signed-off-by: Raghavendra Kakarla <rkakarla@codeaurora.org>
Signed-off-by: Sivasri Kumar Vanka <sivasri@codeaurora.org>
Signed-off-by: Haribabu Gattem <haribabu@codeaurora.org>
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
Add non psci legacy lpm support. Modify and align changes
for clock event, MPM and cpu hotplug for LPM callback notification.
Remove deprecated scheduler c-state(idle cpu), d-state(idle cluster)
setting from lpm driver.
Snapshot is taken from msm-4.9 kernel version @commit b9ad452666da39.
("soc: qcom: bgrsb: Increase time out for RSB channel opening").
Change-Id: I8958ab4f098cc6d875071e3f100b8b74845e0cfa
Signed-off-by: Raghavendra Kakarla <rkakarla@codeaurora.org>
Signed-off-by: Haribabu Gattem <haribabu@codeaurora.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Suresh Kumar Allam <allamsuresh@codeaurora.org>
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
Add SOC ID to support socinfo for Blair SOC.
Change-Id: I92f7d55c389bbb4a25c6c29a83457604b53e7039
Signed-off-by: Mayank Grover <groverm@codeaurora.org>
Add initial defconfig fragment support to enable compilation
for the blair platform.
Change-Id: I944b6d892d85459493b400b98a52f108f9f94aff
Signed-off-by: Mayank Grover <groverm@codeaurora.org>
Consider a scenario where setup packet gets queued from the
function driver and without geting completion for that request
composition switch or cable disconnect happens. Since the
request is not given back to the gadget driver it will be in
pending list. During composition switch or cable disconnect
composite dev cleanup happens which will free the request
without dequeing it since setup_pending is not set for the
request. When a new setup packet is queued and the completion
for the new setup packet happens driver will try to access the
freed request from the pending list leading to use-after-free.
Fix this by setting setup_pending to true if ep_queue on ep0
is successful.
Change-Id: I7fe083dfc99663681fc0b98e02613799e526d3d4
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
flush_cache_all() is not supported in msm-5.4.
Change-Id: Ibd87c401d37917f341049e5b19db97dd79eafbb2
Signed-off-by: Ping Jiang <scottjiang@codeaurora.org>
