dwc3_gadget_wakeup() API is called for remote wakeup in high speed as
well function remote wakeup context in super speed if USB is into low
power mode. For USB func remote wakeup context, bring USB out of lower
power mode and resume USB bus unconditionally.
Change-Id: I98d015bb0040bcd31b90a464ca25b3e600587a9c
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Some (PON gen2) platforms still use legacy hard-reset offset [7:2]
of the PON_RB_SPARE register. Add a DT property to support it.
Change-Id: I8fd3434bcc064965b11aaf3e9c7fcbf694145d21
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Enable core hang detect support on gen3auto targets.
Change-Id: Ie5eb562a8aed9ac1b211c666876bf8c49bd39f2a
Signed-off-by: Shreyas K K <shrekk@codeaurora.org>
Enable the devfreq governor, monitor and device
support on gen3auto targets.
Change-Id: I463d99a61b90ec15d0661c113c57cc1ca3dd53be
Signed-off-by: Shreyas K K <shrekk@codeaurora.org>
Enable kernel configs needed to suppot ramdump on gen3auto,
these drivers help to capture necessary debug information
in DDR and IMEM when the system crashes either after a panic
or due to any system lockup.
Change-Id: Ie4d2b0cafba363703fe9cac03e6255df3e09cd7e
Signed-off-by: Vivek Kumar <vivekuma@codeaurora.org>
Signed-off-by: Shreyas K K <shrekk@codeaurora.org>
Update compatible string from qcom,wcn6750 to
qcom,wcn6750-bt inorder to make it different from
WLAN compatible string.
This will help in removing probe warnings during bootup.
Change-Id: If6f938187b5f34438ee8bf5330844b839de942b9
Signed-off-by: priyankar <prigup@codeaurora.org>
We can't use devm_ioremap_resource here because
we purposely double map the gpu_cc registers for
debugging purposes.
Change-Id: If6e60431fe54f9d647fd09e5e633d7b7edc3c62f
Signed-off-by: Hui Li <hul@codeaurora.org>
Add support for the graphics clock controller found on SM6150
based devices. This should allow GPU device drivers to probe
and control their clocks.
Change-Id: Ic4dc10771a4ea79d181be38e6f1594ecc6f314d3
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add support for display clock controller found on SM6150
based devices. This would allow display device driver
to probe and control their clocks.
Change-Id: I2e5e20f5bf518d6bc1128b6c2fb26a5e0480a4a3
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add support for camera clock controller found on SM6150
based devices. This would allow camera device drivers
to probe and control their clocks.
Change-Id: Ic5b5e6e9363f0272e777c500028f876f3e79a7b8
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add support for peripheral clocks controlled by
global clock controller.
Change-Id: I7717b8e32fd3918359faf3d63af2f6a82de81088
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add clock rpmh data to communicate with RPMH clocks for SM6150.
Change-Id: I6aed48fce932923e52dc9109cca427da92375814
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add HARDENED_USERCOPY and SLUB_DEBUG to both variants. Also add
useful configs to debug variant for testing countermeasures.
Change-Id: I7d3ae4e7d26d480c7a9dcfa1683602aabddf5af0
Signed-off-by: Dennis Cagle <dcagle@codeaurora.org>
Memory allocation for MHI client channels is failing.
Resolve it by fixing the conditional check for
NULL pointer.
Change-Id: I98a7fe085482116236703e3af69010bade0130b7
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Enable the SMB1398_CHARGER driver corresponding to the SMB1394 PMIC
found on sdxlemur platforms.
Change-Id: Ic53687e9f71cc8ec8aeeb01ef7a25b1533775777
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Add support for SMB1394, which is a a variant of SMB1398.
Change-Id: I0e508079174ae16e0aa8c5f242be3686126319ea
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
This change is for general scheduler improvement.
Change-Id: I288fc9a8858cb29ae9c6993b398a349b4a8c7475
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Enable OSM L3 interconnect driver so that consumers
can change the hardware state based on the usecase.
Change-Id: Ibb4156ff5adbf5c874951e781f41706828fa5751
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Enable the SM6150 interconnect driver so that consumers are
able to obtain their path handles properly.
Change-Id: Ie6b99d37f73b69dc375426d64e9148b9a64180f5
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add a device tree property which enables NCP symmetry. This
configuration in HW enables the NCP voltage to follow LDO.
Change-Id: If44b049a3ecd031f111dcb8477166925a0d01914
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
