commit 94d9bf671ae314cacc2d7bf96bd233b4abc7cede upstream.
The duplicate kmalloc here is causing memory leak. The request
preparation in bot_send_write_request is also done in
usbg_prepare_w_request. Remove the duplicate work.
Fixes: c52661d60f ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f4f26c3d586cde0d46f8c3bcb4e8ae32311b650d.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b2a52e88ab0c9469eaadd4d4c8f57d072477820 upstream.
We submitted the command with TARGET_SCF_ACK_KREF, which requires
acknowledgment of command completion. If the command fails, make sure to
decrement the ref count.
Fixes: cff834c16d ("usb-gadget/tcm: Convert to TARGET_SCF_ACK_KREF I/O krefs")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3c667b4d9c8b0b580346a69ff53616b6a74cfea2.1733876548.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68abd0c4ebf24cd499841a488b97a6873d5efabb upstream.
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.
The following sequence deletes the interface:
brcmf_detach()
brcmf_remove_interface()
brcmf_del_if()
Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:
brcmf_detach()
brcmf_proto_detach()
brcmf_proto_msgbuf_detach()
brcmf_flowring_detach()
brcmf_msgbuf_delete_flowring()
brcmf_msgbuf_remove_flowring()
brcmf_flowring_delete()
brcmf_get_ifp()
brcmf_txfinalize()
Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
This will only happen if a flowring still has an skb.
Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a5b38c3fd709e8acd2bfdedf66c25e6af759576 upstream.
The hid-sensor-hub creates the individual device structs and transfers them
to the created mfd platform-devices via the platform_data in the mfd_cell.
Before e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
the sensor-hub was managing access centrally, with one "completion" in the
hub's data structure, which needed to be finished on removal at the latest.
The mentioned commit then moved this central management to each hid sensor
device, resulting on a completion in each struct hid_sensor_hub_device.
The remove procedure was adapted to go through all sensor devices and
finish any pending "completion".
What this didn't take into account was, platform_device_add_data() that is
used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted
platform-data. So the data the platform-device gets is a copy of the
original data, meaning that the device worked on a different completion
than what sensor_hub_remove() currently wants to access.
To fix that, use device_for_each_child() to go through each child-device
similar to how mfd_remove_devices() unregisters the devices later and
with that get the live platform_data to finalize the correct completion.
Fixes: e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241107114712.538976-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 267b21d0bef8e67dbe6c591c9991444e58237ec9 upstream.
According to DT spec, size of property 'alignment' is based on parent
node’s #size-cells property.
But __reserved_mem_alloc_size() wrongly uses @dt_root_addr_cells to get
the property obviously.
Fix by using @dt_root_size_cells instead of @dt_root_addr_cells.
Fixes: 3f0c820664 ("drivers: of: add initialization code for dynamic reserved memory")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-9-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9e58c934c56aa35b0fb436d9afd86ef326bae0e upstream.
of_find_node_opts_by_path() fails to find OF device node when its
@path parameter have pattern below:
"alias-name/node-name-1/.../node-name-N:options".
The reason is that alias name length calculated by the API is wrong, as
explained by example below:
"testcase-alias/phandle-tests/consumer-a:testaliasoption".
^ ^ ^
0 14 39
The right length of alias 'testcase-alias' is 14, but the result worked
out by the API is 39 which is obvious wrong.
Fix by using index of either '/' or ':' as the length who comes earlier.
Fixes: 75c28c09af ("of: add optional options parameter to of_find_node_by_path()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241216-of_core_fix-v2-1-e69b8f60da63@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4c00c9b1f70cd11792ff5b825899a6ee0234a62 upstream.
API of_parse_phandle_with_args_map() will use wrong input for nexus node
Nexus_2 as shown below:
Node_1 Nexus_1 Nexus_2
&Nexus_1,arg_1 -> arg_1,&Nexus_2,arg_2' -> &Nexus_2,arg_2 -> arg_2,...
map-pass-thru=<...>
Nexus_1's output arg_2 should be used as input of Nexus_2, but the API
wrongly uses arg_2' instead which != arg_2 due to Nexus_1's map-pass-thru.
Fix by always making @match_array point to @initial_match_array into
which to store nexus output.
Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250109-of_core_fix-v4-1-db8a72415b8c@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62892e77b8a64b9dc0e1da75980aa145347b6820 upstream.
The comparison function cmpworker() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
Symmetry: If x < y, then y > x.
Transitivity: If x < y and y < z, then x < z.
In its current implementation, cmpworker() incorrectly returns 0 when
w1->tid < w2->tid, which breaks both symmetry and transitivity. This
violation causes undefined behavior, potentially leading to issues such
as memory corruption in glibc [1].
Fix the issue by returning -1 when w1->tid < w2->tid, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 121dd9ea01 ("perf bench: Add epoll parallel epoll_wait benchmark")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250116110842.4087530-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89aa5925d201b90a48416784831916ca203658f9 upstream.
aggr_state and unit fields are u32. The result of their
multiplication may not fit in this type.
Add explicit casting to prevent overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 04053f4d23 ("clk: qcom: clk-rpmh: Add IPA clock support")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33f1722eb86e45320a3dd7b3d42f6593a1d595c2 upstream.
Commit c45ae598fc ("clk: qcom: support for alpha mode configuration")
added support for configuring alpha mode, but it seems that the feature
was never working in practice.
The value of the alpha_{en,mode}_mask members of the configuration gets
added to the value parameter passed to the regmap_update_bits() function,
however the same values are not getting applied to the bitmask. As the
result, the respective bits in the USER_CTL register are never modifed
which leads to improper configuration of several PLLs.
The following table shows the PLL configurations where the 'alpha_en_mask'
member is set and which are passed as a parameter for the
clk_alpha_pll_configure() function. In the table the 'expected rate' column
shows the rate the PLL should run at with the given configuration, and
the 'real rate' column shows the rate the PLL runs at actually. The real
rates has been verified on hardwareOn IPQ* platforms, on other platforms,
those are computed values only.
file pll expected rate real rate
dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz
dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz
gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz
gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz
gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz
gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz
gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz
gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz
gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz
gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz
gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz
gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz
gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz
gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz
gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz
As it can be seen from the above, there are several PLLs which are
configured incorrectly.
Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask'
values to the bitmask in order to configure the alpha mode correctly.
Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed
in the table above. Since the 'alpha_mode_mask' is not used by any driver
currently, that part of the change causes no functional changes.
Cc: stable@vger.kernel.org
Fixes: c45ae598fc ("clk: qcom: support for alpha mode configuration")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f397409f8ee5bc82901eeaf799e1cbc4f8edcf1 upstream.
A NULL sock pointer is passed into l2cap_sock_alloc() when it is called
from l2cap_sock_new_connection_cb() and the error handling paths should
also be aware of it.
Seemingly a more elegant solution would be to swap bt_sock_alloc() and
l2cap_chan_create() calls since they are not interdependent to that moment
but then l2cap_chan_create() adds the soon to be deallocated and still
dummy-initialized channel to the global list accessible by many L2CAP
paths. The channel would be removed from the list in short period of time
but be a bit more straight-forward here and just check for NULL instead of
changing the order of function calls.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 7c4f78cdb8e7 ("Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create()")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f230f41fdd9e799f43a699348dc572bca7159aa upstream.
We try to reuse the same vsie page when re-executing the vsie with a
given SCB address. The result is that we use the same shadow SCB --
residing in the vsie page -- and can avoid flushing the TLB when
re-running the vsie on a CPU.
So, when we allocate a fresh vsie page, or when we reuse a vsie page for
a different SCB address -- reusing the shadow SCB in different context --
we set ihcpu=0xffff to trigger the flush.
However, after we looked up the SCB address in the radix tree, but before
we grabbed the vsie page by raising the refcount to 2, someone could reuse
the vsie page for a different SCB address, adjusting page->index and the
radix tree. In that case, we would be reusing the vsie page with a
wrong page->index.
Another corner case is that we might set the SCB address for a vsie
page, but fail the insertion into the radix tree. Whoever would reuse
that page would remove the corresponding radix tree entry -- which might
now be a valid entry pointing at another page, resulting in the wrong
vsie page getting removed from the radix tree.
Let's handle such races better, by validating that the SCB address of a
vsie page didn't change after we grabbed it (not reuse for a different
SCB; the alternative would be performing another tree lookup), and by
setting the SCB address to invalid until the insertion in the tree
succeeded (SCB addresses are aligned to 512, so ULONG_MAX is invalid).
These scenarios are rare, the effects a bit unclear, and these issues were
only found by code inspection. Let's CC stable to be safe.
Fixes: a3508fbe9d ("KVM: s390: vsie: initial support for nested virtualization")
Cc: stable@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Message-ID: <20250107154344.1003072-2-david@redhat.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e7381f3617d14b3c11da80ff5f8a93ab14cfc46 upstream.
Explicitly verify the target vCPU is fully online _prior_ to clamping the
index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will
generate '0', i.e. KVM will return vCPU0 instead of NULL.
In practice, the bug is unlikely to cause problems, as it will only come
into play if userspace or the guest is buggy or misbehaving, e.g. KVM may
send interrupts to vCPU0 instead of dropping them on the floor.
However, returning vCPU0 when it shouldn't exist per online_vcpus is
problematic now that KVM uses an xarray for the vCPUs array, as KVM needs
to insert into the xarray before publishing the vCPU to userspace (see
commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")),
i.e. before vCPU creation is guaranteed to succeed.
As a result, incorrectly providing access to vCPU0 will trigger a
use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu()
bails out of vCPU creation due to an error and frees vCPU0. Commit
afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but
in doing so introduced an unsolvable teardown conundrum. Preventing
accesses to vCPU0 before it's fully online will allow reverting commit
afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race.
Fixes: 1d487e9bf8 ("KVM: fix spectrev1 gadgets")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241009150455.1057573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d241b06802c6c2176ae7aa4f9f17f8a577ed337 upstream.
During mass manufacturing, we noticed the mmc_rx_crc_error counter,
as reported by "ethtool -S eth0 | grep mmc_rx_crc_error", to increase
above zero during nuttcp speedtests. Most of the time, this did not
affect the achieved speed, but it prompted this investigation.
Cycling through the rx_delay range on six boards (see table below) of
various ages shows that there is a large good region from 0x12 to 0x35
where we see zero crc errors on all tested boards.
The old rx_delay value (0x10) seems to have always been on the edge for
the KSZ9031RNX that is usually placed on Puma.
Choose "rx_delay = 0x23" to put us smack in the middle of the good
region. This works fine as well with the KSZ9131RNX PHY that was used
for a small number of boards during the COVID chip shortages.
Board S/N PHY rx_delay good region
--------- --- --------------------
Puma TT0069903 KSZ9031RNX 0x11 0x35
Puma TT0157733 KSZ9031RNX 0x11 0x35
Puma TT0681551 KSZ9031RNX 0x12 0x37
Puma TT0681156 KSZ9031RNX 0x10 0x38
Puma 17496030079 KSZ9031RNX 0x10 0x37 (Puma v1.2 from 2017)
Puma TT0681720 KSZ9131RNX 0x02 0x39 (alternative PHY used in very few boards)
Intersection of good regions = 0x12 0x35
Middle of good region = 0x23
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Cc: stable@vger.kernel.org
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # Puma v2.1 and v2.3 with KSZ9031
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Link: https://lore.kernel.org/r/20241213-puma_rx_delay-v4-1-8e8e11cc6ed7@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55cf2f4b945f6a6416cc2524ba740b83cc9af25a upstream.
Most of these sizes and counts are capped at 256MB so the math doesn't
result in an integer overflow. The "relocs" count needs to be checked
as well. Otherwise on 32bit systems the calculation of "full_data"
could be wrong.
full_data = data_len + relocs * sizeof(unsigned long);
Fixes: c995ee28d2 ("binfmt_flat: prevent kernel dammage from corrupted executable headers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/5be17f6c-5338-43be-91ef-650153b975cb@stanley.mountain
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53036937a101b5faeaf98e7438555fa854a1a844 upstream.
Including m68k's <asm/raw_io.h> in vga.h on nommu platforms results
in conflicting defines with io_no.h for various I/O macros from the
__raw_read and __raw_write families. An example error is
In file included from arch/m68k/include/asm/vga.h:12,
from include/video/vga.h:22,
from include/linux/vgaarb.h:34,
from drivers/video/aperture.c:12:
>> arch/m68k/include/asm/raw_io.h:39: warning: "__raw_readb" redefined
39 | #define __raw_readb in_8
|
In file included from arch/m68k/include/asm/io.h:6,
from include/linux/io.h:13,
from include/linux/irq.h:20,
from include/asm-generic/hardirq.h:17,
from ./arch/m68k/include/generated/asm/hardirq.h:1,
from include/linux/hardirq.h:11,
from include/linux/interrupt.h:11,
from include/linux/trace_recursion.h:5,
from include/linux/ftrace.h:10,
from include/linux/kprobes.h:28,
from include/linux/kgdb.h:19,
from include/linux/fb.h:6,
from drivers/video/aperture.c:5:
arch/m68k/include/asm/io_no.h:16: note: this is the location of the previous definition
16 | #define __raw_readb(addr) \
|
Include <asm/io.h>, which avoids raw_io.h on nommu platforms.
Also change the defined values of some of the read/write symbols in
vga.h to __raw_read/__raw_write as the raw_in/raw_out symbols are not
generally available.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501071629.DNEswlm8-lkp@intel.com/
Fixes: 5c3f968712 ("m68k/video: Create <asm/vga.h>")
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v3.5+
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20250107095912.130530-1-tzimmermann@suse.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26701574cee6777f867f89b4a5c667817e1ee0dd upstream.
The futex operation FUTEX_OP_ANDN is supposed to implement
*(int *)UADDR2 &= ~OPARG;
The s390 implementation just implements an AND instead of ANDN.
Add the missing bitwise not operation to oparg to fix this.
This is broken since nearly 19 years, so it looks like user space is
not making use of this operation.
Fixes: 3363fbdd6f ("[PATCH] s390: futex atomic operations")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d2e820a86793595e2a776855d04701109e46663 upstream.
I struggle to explain dividing an ARRAY_SIZE() by the size of an element
once again. As the latter equals to 2, only the half of EEPROM was ever
written. Drop the unexplainable division and write full ARRAY_SIZE().
Cc: stable@vger.kernel.org
Fixes: 7a8685accb ("leds: lp8860: Introduce TI lp8860 4 channel LED driver")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20241114101402.2562878-1-alexander.sverdlin@siemens.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43855ac61483cb914f060851535ea753c094b3e0 upstream.
The driver generates following warning when regulator support isn't
enabled in the kernel. Fix it.
drivers/cpufreq/s3c64xx-cpufreq.c: In function 's3c64xx_cpufreq_set_target':
>> drivers/cpufreq/s3c64xx-cpufreq.c:55:22: warning: variable 'old_freq' set but not used [-Wunused-but-set-variable]
55 | unsigned int old_freq, new_freq;
| ^~~~~~~~
>> drivers/cpufreq/s3c64xx-cpufreq.c:54:30: warning: variable 'dvfs' set but not used [-Wunused-but-set-variable]
54 | struct s3c64xx_dvfs *dvfs;
| ^~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501191803.CtfT7b2o-lkp@intel.com/
Cc: 5.4+ <stable@vger.kernel.org> # v5.4+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/236b227e929e5adc04d1e9e7af6845a46c8e9432.1737525916.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a70c7b3cbc0688016810bb2e0b9b8a0d6a530045 ]
This reverts commit 3ca459eaba1bf96a8c7878de84fa8872259a01e3.
The blamed commit caused a regression when neither tun->owner nor
tun->group is set. This is intended to be allowed, but now requires
CAP_NET_ADMIN.
Discussion in the referenced thread pointed out that the original
issue that prompted this patch can be resolved in userspace.
The relaxed access control may also make a device accessible when it
previously wasn't, while existing users may depend on it to not be.
This is a clean pure git revert, except for fixing the indentation on
the gid_valid line that checkpatch correctly flagged.
Fixes: 3ca459eaba1b ("tun: fix group permission check")
Link: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Stas Sergeev <stsp2@yandex.ru>
Link: https://patch.msgid.link/20250204161015.739430-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 638ba5089324796c2ee49af10427459c2de35f71 ]
qdisc_tree_reduce_backlog() notifies parent qdisc only if child
qdisc becomes empty, therefore we need to reduce the backlog of the
child qdisc before calling it. Otherwise it would miss the opportunity
to call cops->qlen_notify(), in the case of DRR, it resulted in UAF
since DRR uses ->qlen_notify() to maintain its active list.
Fixes: f8d4bc455047 ("net/sched: netem: account for backlog updates from child qdisc")
Cc: Martin Ottens <martin.ottens@fau.de>
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 235174b2bed88501fda689c113c55737f99332d8 ]
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0efe83ed325277bb70f9435d4d9fc70bebdcca8 ]
Disable PCIe AER on the tg3 device on system reboot on a limited
list of Dell PowerEdge systems. This prevents a fatal PCIe AER event
on the tg3 device during the ACPI _PTS (prepare to sleep) method for
S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep()
as part of the kernel's reboot sequence as a result of commit
38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot").
There was an earlier fix for this problem by commit 2ca1c94ce0b6
("tg3: Disable tg3 device on system reboot to avoid triggering AER").
But it was discovered that this earlier fix caused a reboot hang
when some Dell PowerEdge servers were booted via ipxe. To address
this reboot hang, the earlier fix was essentially reverted by commit
9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF").
This re-exposed the tg3 PCIe AER on reboot problem.
This fix is not an ideal solution because the root cause of the AER
is in system firmware. Instead, it's a targeted work-around in the
tg3 driver.
Note also that the PCIe AER must be disabled on the tg3 device even
if the system is configured to use "firmware first" error handling.
V3:
- Fix sparse warning on improper comparison of pdev->current_state
- Adhere to netdev comment style
Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF")
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6daaae5ff7f3b23a2dacc9c387ff3d4f95b67cad ]
If the hotplug detect of a display is low for longer than one second
(configurable through drm_dp_cec_unregister_delay), then the CEC adapter
is unregistered since we assume the display was disconnected. If the
HPD went low for less than one second, then we check if the properties
of the CEC adapter have changed, since that indicates that we actually
switch to new hardware and we have to unregister the old CEC device and
register a new one.
Unfortunately, the test for changed properties was written poorly, and
after a new CEC capability was added to the CEC core code the test always
returned true (i.e. the properties had changed).
As a result the CEC device was unregistered and re-registered for every
HPD toggle. If the CEC remote controller integration was also enabled
(CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was
also unregistered and re-registered. As a result the input device in
/sys would keep incrementing its number, e.g.:
/sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20
Since short HPD toggles are common, the number could over time get into
the thousands.
While not a serious issue (i.e. nothing crashes), it is not intended
to work that way.
This patch changes the test so that it only checks for the single CEC
capability that can actually change, and it ignores any other
capabilities, so this is now safe as well if new caps are added in
the future.
With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be
dropped as well, so that's a nice cleanup.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Farblos <farblos@vodafonemail.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 2c6d1fffa1 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX")
Tested-by: Farblos <farblos@vodafonemail.de>
Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 294b2b7516fd06a8dd82e4a6118f318ec521e706 ]
When the set feature attempts fails with any NVME status code set in
nvme_set_queue_count, the function still report success. Though the
numbers of queues set to 0. This is done to support controllers in
degraded state (the admin queue is still up and running but no IO
queues).
Though there is an exception. When nvme_set_features reports an host
path error, nvme_set_queue_count should propagate this error as the
connectivity is lost, which means also the admin queue is not working
anymore.
Fixes: 9a0be7abb6 ("nvme: refactor set_queue_count")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e0a19912adb68a4b2b74fd77001c96cd83eb073 ]
If a command is queued to the final usable TRB of a ring segment, the
enqueue pointer is advanced to the subsequent link TRB and no further.
If the command is later aborted, when the abort completion is handled
the dequeue pointer is advanced to the first TRB of the next segment.
If no further commands are queued, xhci_handle_stopped_cmd_ring() sees
the ring pointers unequal and assumes that there is a pending command,
so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL.
Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell
ring likely is unnecessary too, but it's harmless. Leave it alone.
This is probably Bug 219532, but no confirmation has been received.
The issue has been independently reproduced and confirmed fixed using
a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever.
Everything continued working normally after several prevented crashes.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219532
Fixes: c311e391a7 ("xhci: rework command timeout and cancellation,")
CC: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241227120142.1035206-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ]
- The HCD address_device callback now accepts a user-defined timeout value
in milliseconds, providing better control over command execution times.
- The default timeout value for the address_device command has been set
to 5000 ms, aligning with the USB 3.2 specification. However, this
timeout can be adjusted as needed.
- The xhci_setup_device function has been updated to accept the timeout
value, allowing it to specify the maximum wait time for the command
operation to complete.
- The hub driver has also been updated to accommodate the newly added
timeout parameter during the SET_ADDRESS request.
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1e0a19912adb ("usb: xhci: Fix NULL pointer dereference on certain command aborts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1999ad32d4ff00581007543adffc465694b2e77b ]
This converts the driver to use the new tasklet API introduced in
commit 12cc923f1ccc ("tasklet: Introduce new initialization API")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12cc923f1ccc1df467e046b02a72c2b3b321b6a2 ]
Nowadays, modern kernel subsystems that use callbacks pass the data
structure associated with a given callback as argument to the callback.
The tasklet subsystem remains one which passes an arbitrary unsigned
long to the callback function. This has several problems:
- This keeps an extra field for storing the argument in each tasklet
data structure, it bloats the tasklet_struct structure with a redundant
.data field
- No type checking can be performed on this argument. Instead of
using container_of() like other callback subsystems, it forces callbacks
to do explicit type cast of the unsigned long argument into the required
object type.
- Buffer overflows can overwrite the .func and the .data field, so
an attacker can easily overwrite the function and its first argument
to whatever it wants.
Add a new tasklet initialization API, via DECLARE_TASKLET() and
tasklet_setup(), which will replace the existing ones.
This work is greatly inspired by the timer_struct conversion series,
see commit e99e88a9d2 ("treewide: setup_timer() -> timer_setup()")
To avoid problems with both -Wcast-function-type (which is enabled in
the kernel via -Wextra is several subsystems), and with mismatched
function prototypes when build with Control Flow Integrity enabled,
this adds the "use_callback" member to let the tasklet caller choose
which union member to call through. Once all old API uses are removed,
this and the .data member will be removed as well. (On 64-bit this does
not grow the struct size as the new member fills the hole after atomic_t,
which is also "int" sized.)
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Co-developed-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dfc1b168a8c4b376fa222b27b97c2c4ad4b786e1 upstream.
The userprog infrastructure links objects files through $(CC).
Either explicitly by manually calling $(CC) on multiple object files or
implicitly by directly compiling a source file to an executable.
The documentation at Documentation/kbuild/llvm.rst indicates that ld.lld
would be used for linking if LLVM=1 is specified.
However clang instead will use either a globally installed cross linker
from $PATH called ${target}-ld or fall back to the system linker, which
probably does not support crosslinking.
For the normal kernel build this is not an issue because the linker is
always executed directly, without the compiler being involved.
Explicitly pass --ld-path to clang so $(LD) is respected.
As clang 13.0.1 is required to build the kernel, this option is available.
Fixes: 7f3a59db274c ("kbuild: add infrastructure to build userspace programs")
Cc: stable@vger.kernel.org # needs wrapping in $(cc-option) for < 6.9
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: use cc-option for 6.6 and older, as those trees support back to
clang-11]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 737d4d91d35b5f7fa5bb442651472277318b0bfd upstream.
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).
As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow's quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it's not worth
complicating the code to preserve the old behaviour.
Fixes: 546ea84d07e3 ("sched: sch_cake: fix bulk flow accounting logic for host fairness")
Reported-by: syzbot+f63600d288bfb7057424@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://patch.msgid.link/20250107120105.70685-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Hagar: needed contextual fixes due to missing commit 7e3cf0843fe5]
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Reviewed-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 221cd51efe4565501a3dbf04cc011b537dcce7fb upstream.
When an async control is written, we copy a pointer to the file handle
that started the operation. That pointer will be used when the device is
done. Which could be anytime in the future.
If the user closes that file descriptor, its structure will be freed,
and there will be one dangling pointer per pending async control, that
the driver will try to use.
Clean all the dangling pointers during release().
To avoid adding a performance penalty in the most common case (no async
operation), a counter has been introduced with some logic to make sure
that it is properly handled.
Cc: stable@vger.kernel.org
Fixes: e5225c820c ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-3-26c867231118@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9fecd096f67a4469536e040a8a10bbfb665918b upstream.
Now we keep a reference to the active fh for any call to uvc_ctrl_set,
regardless if it is an actual set or if it is a just a try or if the
device refused the operation.
We should only keep the file handle if the device actually accepted
applying the operation.
Cc: stable@vger.kernel.org
Fixes: e5225c820c ("media: uvcvideo: Send a control event when a Control Change interrupt arrives")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20241203-uvc-fix-async-v6-1-26c867231118@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee70999a988b8abc3490609142f50ebaa8344432 upstream.
Patch series "nilfs2: fix issues with rename operations".
This series fixes BUG_ON check failures reported by syzbot around rename
operations, and a minor behavioral issue where the mtime of a child
directory changes when it is renamed instead of moved.
This patch (of 2):
The directory manipulation routines nilfs_set_link() and
nilfs_delete_entry() rewrite the directory entry in the folio/page
previously read by nilfs_find_entry(), so error handling is omitted on the
assumption that nilfs_prepare_chunk(), which prepares the buffer for
rewriting, will always succeed for these. And if an error is returned, it
triggers the legacy BUG_ON() checks in each routine.
This assumption is wrong, as proven by syzbot: the buffer layer called by
nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may
fail due to metadata corruption or other reasons. This has been there all
along, but improved sanity checks and error handling may have made it more
reproducible in fuzzing tests.
Fix this issue by adding missing error paths in nilfs_set_link(),
nilfs_delete_entry(), and their caller nilfs_rename().
Link: https://lkml.kernel.org/r/20250111143518.7901-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250111143518.7901-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+32c3706ebf5d95046ea1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=32c3706ebf5d95046ea1
Reported-by: syzbot+1097e95f134f37d9395c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1097e95f134f37d9395c
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cf57c6df818f58fdad16a909506be213623a88e upstream.
In nilfs_rename(), calls to nilfs_put_page() to release pages obtained
with nilfs_find_entry() or nilfs_dotdot() are alternated in the normal
path.
When replacing the kernel memory mapping method from kmap to
kmap_local_{page,folio}, this violates the constraint on the calling order
of kunmap_local().
Swap the order of nilfs_put_page calls where the kmap sections of multiple
pages overlap so that they are nested, allowing direct replacement of
nilfs_put_page() -> unmap_and_put_page().
Without this reordering, that replacement will cause a kernel WARNING in
kunmap_local_indexed() on architectures with high memory mapping.
Link: https://lkml.kernel.org/r/20231127143036.2425-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ee70999a988b ("nilfs2: handle errors that nilfs_prepare_chunk() may return")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 584db20c181f5e28c0386d7987406ace7fbd3e49 upstream.
Patch series "nilfs2: Folio conversions for directory paths".
This series applies page->folio conversions to nilfs2 directory
operations. This reduces hidden compound_head() calls and also converts
deprecated kmap calls to kmap_local in the directory code.
Although nilfs2 does not yet support large folios, Matthew has done his
best here to include support for large folios, which will be needed for
devices with large block sizes.
This series corresponds to the second half of the original post [1], but
with two complementary patches inserted at the beginning and some
adjustments, to prevent a kmap_local constraint violation found during
testing with highmem mapping.
[1] https://lkml.kernel.org/r/20231106173903.1734114-1-willy@infradead.org
I have reviewed all changes and tested this for regular and small block
sizes, both on machines with and without highmem mapping. No issues
found.
This patch (of 17):
In a few directory operations, the call to nilfs_put_page() for a page
obtained using nilfs_find_entry() or nilfs_dotdot() is hidden in
nilfs_set_link() and nilfs_delete_entry(), making it difficult to track
page release and preventing change of its call position.
By moving nilfs_put_page() out of these functions, this makes the page
get/put correspondence clearer and makes it easier to swap
nilfs_put_page() calls (and kunmap calls within them) when modifying
multiple directory entries simultaneously in nilfs_rename().
Also, update comments for nilfs_set_link() and nilfs_delete_entry() to
reflect changes in their behavior.
To make nilfs_put_page() visible from namei.c, this moves its definition
to nilfs.h and replaces existing equivalents to use it, but the exposure
of that definition is temporary and will be removed on a later kmap ->
kmap_local conversion.
Link: https://lkml.kernel.org/r/20231127143036.2425-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20231127143036.2425-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ee70999a988b ("nilfs2: handle errors that nilfs_prepare_chunk() may return")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 269e31aecdd0b70f53a05def79480f15cbcc0fd6 upstream.
There was a change in the mxs-dma engine that uses a new custom flag.
The change was not applied to the mxs spi driver.
This results in chipselect being deasserted too early.
This fixes the chipselect problem by using the new flag in the mxs-spi
driver.
Fixes: ceeeb99cd8 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com>
Link: https://msgid.link/r/20240202115330.wxkbfmvd76sy3a6a@runtux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5c0e00a391dd0099fe95991bb2f962848d851916 ]
The GHES driver overrides the panic= setting by force-rebooting the
system after a fatal hw error has been reported. The intent being that
such an error would be reported earlier.
However, this is not optimal when a hard-to-debug issue requires long
time to reproduce and when that happens, the box will get rebooted after
30 seconds and thus destroy the whole hw context of when the error
happened.
So rip out the default GHES panic timeout and honor the global one.
In the panic disabled (panic=0) case, the error will still be logged to
dmesg for later inspection and if panic after a hw error is really
required, then that can be controlled the usual way - use panic= on the
cmdline or set it in the kernel .config's CONFIG_PANIC_TIMEOUT.
Reported-by: Feng Tang <feng.tang@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250113125224.GFZ4UMiNtWIJvgpveU@fat_crate.local
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e89d21f8189d286f80b900e1b7cf57cb1f3037e ]
On N4100 / N4120 Gemini Lake SoCs the ISA bridge PCI device-id is 31e8
rather the 3197 found on e.g. the N4000 / N4020.
While at fix the existing GLK PCI-id table entry breaking the table
being sorted by device-id.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241114193808.110132-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df7546fc03b8f004eee0b9e3256369f7d096685 ]
syzbot is reporting too large allocation warning at tomoyo_write_control(),
for one can write a very very long line without new line character. To fix
this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE,
for practically a valid line should be always shorter than 32KB where the
"too small to fail" memory-allocation rule applies.
One might try to write a valid line that is longer than 32KB, but such
request will likely fail with -ENOMEM. Therefore, I feel that separately
returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant.
There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE.
Reported-by: syzbot+7536f77535e5210a5c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7536f77535e5210a5c76
Reported-by: Leo Stone <leocstone@gmail.com>
Closes: https://lkml.kernel.org/r/20241216021459.178759-2-leocstone@gmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f4a0948c3524ae50f166dbc6572a3296b014e62 ]
In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a44f8da29352f76c99c6904ee652911b8dc7dd ]
The card-quirk was added to limit the clock-rate for a card with UHS-mode
support, although let's respect the quirk for non-UHS mode too, to make the
behaviour consistent.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Message-ID: <1732268242-72799-1-git-send-email-shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
