This reverts commit 7d3ecfd796.
This change had caused a regression with swr-haptics driver probe
as the soundwire master couldn't enumerate swr haptics. Revert
this until we can understand why soundwire enumeration fails.
Change-Id: Ie5840247013a1a3fab15758e9ace7b131619be49
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
MMRM interface is used to do admission control of
specific resources (eg: clock) of multimedia clients
(camera/display/video/cvp).
Change-Id: Ife92d31ab08c80c06467771e74d05ab1a9a8a54b
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
SVM going to rely on kernel autosleep feature to do suspend-to-RAM.
Enable required configurations to achieve suspend-to-RAM functionality.
Change-Id: Ie31abce7927c8b6b2ce5dad6f917f96c52e90803
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Configure dbl and msgq interrupts as wakeup capable to wake up the SVM
from suspend-to-RAM state.
Change-Id: I1825109736ace36c5c871d52dfefe4a320fea335
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
This change enables CONFIG_NL80211_TESTMODE config for
wlan host driver in holi.
Change-Id: I0974f58a2f25c14991ff4a22b998827b0a579b95
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
The cooling device registration is using the parent node of the cpu
voltage cooling device. The devicetree configs are using the child node
to identify the cooling device. Switch to use the child device node, so
that the cooling device is bound with the thermal zone.
Change-Id: Id501421002c5dac7cb924455e09538a384ec9f85
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Modified code in driver to align DT property
name with DTSI files.
Change-Id: I6423dcc68eb1dbf73c63240b128f41476caba99c
Signed-off-by: Tapas Dey <tdey@codeaurora.org>
Correct the device passed for registering a proxy consumer supply
in the regulator device probe.
Change-Id: I33028648b66b922cb1132fd87ca8aa2be1b02799
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Don't start usb transfer when rwp offset is invalid to avoid exception
happening when transfer usb data.
Change-Id: I7182ebb2e66131a21d65f7df0ad239c6346c0e9d
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
The EUD driver's 'enable' command line argument is set to
EUD_ENABLE_CMD even if the bootloader hasn't enabled it,
which is not correct. Hence, update the 'enable' variable
based on the state of the hardware.
Change-Id: I1159436c0e9a803462f2154ccc05649d3f7b40da
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
In case PCIe endpoint driver infers link down because of
completion timeout for config space access or if link fails
to enumerate, ep driver can request to handle the link down.
This allows to stream line the link down notification to ep
driver to initiate recovery operation.
Change-Id: I652e60e570c1e90c9f96d1c197e4b5501cd60a1e
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Pages that are swapped out are pages that can reside in the movable
zone. However, when they are swapped in, they are restricted to the
normal zone, when they can reside in the movable zone again. Set the
GFP flags accordingly for swapin allocations, so that they can be
satisfied from the movable zone.
Change-Id: I25919034a5197a1c4f830e498d32347aa460187f
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Enable Uclamp for Holi, which is replacement of STUNE.
Change-Id: Ie89b57b244bc818759e63b320d9f015dba5255ec
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
There is a possibility of cx gdsc off timeout when stall on fault
is enabled. smmu fault handler is blocked on device mutex to keep
cx vote and dispatcher trying to turn it off for recovery. To avoid
this race condition, return from fault handler when there is contention
for device mutex.
Change-Id: Ia895152f8cf1ce9bdcfecf256558ba291dabc978
Signed-off-by: gkiranku <gkiranku@codeaurora.org>
QUPv3 controller supports different modes of data transfers for SPI.
Add support to choose only fifo mode for data transfers. Currently
SSC DMA path is broken as agnoc is not enabled. This clk is owned by
SLPI, once SLPI change is mainlined we can use DMA mode for SSC QUP
also.
Change-Id: Ie4c67be29adba9d6c5a5bb1b9eb2161a2b384100
Signed-off-by: Ashish Kori <akori@codeaurora.org>
Avoid using fastrpc ctx after sending rpmsg since it may get
free during async session. During async fastrpc session there
is race condition where after sending rpmsg the ctx could be
free from async query thread.
Change-Id: I5738163096e429f19bd9b495699a1897083737b3
Signed-off-by: Edgar Flores <edgarf@codeaurora.org>
To allow the Secure VM to function similarly to the
primary VM during a panic, the panic timeout and panic
on oops configs need to be set the same way they are set
in the generic GKI configs. Currently this is not set so
the default is 0, meaning that during a panic the watchdog
becomes disabled and the system does not reboot.
Change-Id: Ib92df399da28cd8a39ad7d972fcc56fa2ad0f46a
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
