SKU index is not applicable for all targets. Hence no need
to keep it mandatory. SKU related changes will happen only
when the property is present otherwise will default to 0.
Change-Id: I88076ea95bccd4130202c055e5c148d817dd302e
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Add new DDR type 5X and deprecate DDR type 4Y.
Macro values also changed.
CRs-Fixed: 2534324
Change-Id: I0412b4e624df9c377db18b635d2cde321fccf8d0
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Currently setting signal_info, only if colorspace info
is set properly. But sometimes client can set only range.
So need to send signal_info always to firmware.
Change-Id: I5282ec01b473485ec39f39abbf7160b9c5cc0256
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Eos buffer is queued to firmware and its ref is maintained
using eosbufs.list. Sometimes EOS request client sent even
before port_reconfig. In that case requeing same buffer
which is already with firmware at start_streaming. So during
handle_ebd of 2nd eos buffer, it can't find the entry at
eosbufs.list. So client closes the session.
Always check, if buffer is already queued, then do not queue
the same buffer again, during start_streaming after reconfig.
Change-Id: If934d8ce357226dee78db15ccb7b3c57103d2f12
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
When set color format constraints, one buffer is not
correctly freed, fix it.
Change-Id: Iad497f03981653a7f28524f1d9e4218f706dcca1
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
gki needs video driver as module and hence compile
video driver for qgki variant only.
Change-Id: I6e25c5c7651e02df35c40ac1b27a8a61e3110530
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Initialize port format type to avoid failure
when g_fmt is called before s_fmt.
Change-Id: I37758f6d8be766c75cc8bc97147312b3b0bb0915
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Current location is cleaning up all the existing header files
in usr/include/media directory before installing video specific
header files and hence change video specific header files location.
Kbuild files are not required anymore so remove Kbuild files.
Change-Id: I217d0652be9b2811ef1c6df64bf4143c9bcd1bd3
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add Lahaina-specific platform data needed for driver probe
and remove data for older platforms.
Change-Id: I35e7711fd024467f0b6ce40aabdaf71f0c523e9a
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Initialize device_caps with device capabilities before video
devices are registered, as required by V4L2 framework.
Change-Id: I9fc037ae65d352b15d78eee979df30a24137dea8
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
ar50 and iris1 are no longer used.
Deleting the unused code pieces and files.
Change-Id: I01fab64b5e3682338fc0ffab986e7807a74c37b5
Signed-off-by: Karthikeyan Periasamy <kperiasa@codeaurora.org>
- msm-bus API is deprecated in favor of upstream interconnect API
- Migrate all msm-bus functions to interconnect (icc) API
- Remove msm-bus sub-device probing and parse interconnect fields from
msm-vidc device tree
Change-Id: Ibf08c52e001c5fde7e30d2aedbd3456a270f5b6c
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
- Made the changes in video module to compile successfully.
- Removed cvp and v4l2 private files.
Change-Id: Iaf5f29d6042a87d5b96b1fa4abb985ee3e592f0e
Signed-off-by: Karthikeyan Periasamy <kperiasa@codeaurora.org>
Error recovery is enabled by default & it will get triggered
for all sys error reported by video firmware.
For debugging purpose it can be disabled as:
1. disable error recovery for noc error:
echo 1 > /d/msm_vidc/disable_err_recovery
2. disable error recovery for non-noc error:
echo 2 > /d/msm_vidc/disable_err_recovery
3. disable error recovery for all cases
echo 3 > /d/msm_vidc/disable_err_recovery
Change-Id: Ie260485842704d3e278ded8c6d1722bc19c80f6f
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
print logs based on logmask set on debugfs entry
(/d/msm_vidc/debug_level)
[1] 0xx -> print logs for all session type
[2] 1xx -> print only encoder logs
[3] 2xx -> print only decoder logs
[4] 4xx -> print only cvp logs
Change-Id: I8e01ee9c8b80a50b178ea87bf25d7ef25401f67a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Introduced CVP skip ratio property to indicate the number of
buffers skipped for CVP processing. This serves as a hint to Video
firmware to know the number of frames for which CVP metadata has to be
reused from earlier frame to which CVP metadata was sent
Change-Id: I58ad5daf9a9c6ae7a0aa48e3bd1d60e7dc9229e6
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Raise an insufficient event whenever there is a change reported
from interlace to progressive and vice versa so that driver can
set appropriate work/route mode.
CRs-Fixed: 2444064
Change-Id: Ic78867a2b51aa22de5dfeeb4b806014e2f0f23e6
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
[1] Maintain log_ctxt cookie to track debug information.
[2] Print codec type and session type by default in logs.
Change-Id: I6c01f3238ba868fdc525f5c60f58545a07bdef3a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Print session_id details in all possible call flow paths.
Change-Id: I0c583dc99d4ebee7fbcb4e36d917ba9120fa670e
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Avoid allocating smaller encoder scratch1 buffer for Video
firmware when frame height is greater than frame width.
Change-Id: I663da164b3cbb945d7da2d6ab40199d8ef14d979
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Remove freq list, which is unused in current dcvs design.
Remove unused dcvs load, load_low, load_norm, load_high,
as current dcvs design only use min_freq and dcvs_flags.
Change-Id: Ifbf251a9506286f2f34eca6eeb1af79bd07c0f43
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Update CVP metadata skip logic to send a frame for CVP
processing every time frame rate or operatimg rate changes
dynamically. This helps in handling skipping of CVP metadata
processing for a random number of frames whenever frame rate
or operating rate changes dynamically, and avoid sending
CVP metadata to video firmware for an unpredictable frame.
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Change-Id: I049f0c0ade1700816203713cd82382c2a614f20a
For encode usecase, video driver operates cache always on
the encoded data length rather than the buffer length.
This is an optimization and saves cache operation on unused
memory region.
VB index is used to identify a buffer given to client and fed
again to encoder. Based on that, the filled length of that
buffer is then operated for cache operations.
For certain usecases, it is difficult to identify the buffer
based on VB index. Hence keep a counter to track the max filled
length during the usecase and operate cache on that length
Change-Id: I62cfe876077786ec9d14f541a0080cd2fc124b01
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
