Since clock stop mode is supported, disable mic bias supply
after a successful dmic probe.
Change-Id: I1a545969601367cc22844d1ab8467fb3722d882f
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Because of a HW limitation in DSP, while switching
RCG from TX MCLK to VA MCLK for SVA use cases
a glitch is seen on AHB bus leading to data
corruption in registers.
So, while doing a mux switch for VA RCG clock selection,
do not configure the muxsel register in HLOS as it is
taken care in DSP itself as a workaround for HW limitation.
Change-Id: Iccbe714397796259fa55f9852ece387e949b12e8
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Remove sound wire dmic device from master device list only during
critical error and not for probe defer.
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Soundwire DMICs provide the same quality as regular DMICs but
the interface is soundwire. This reduces the number of pins
on the MSM. Enable soundwire DMICs on lahaina.
Change-Id: I4245369fdcb29cf96f315ebc1d2e9a83a0fbc14b
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add micbias control API to enable SWR DMICs on lahaina target.
Change-Id: I48152971e1af8dedc98ada20e4e808cf18720869
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Some usecases need soundwire bus clock frequency to run at
lower clock rate for better power and performance. Update
soundwire bus clock frequency based on usecase.
Change-Id: I2e786d9f5d5d2ec3841daa934802eeafa79a8f6c
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update the codec dai name for slimbus_7 backend dailink used for BT use
cases.
Change-Id: I7330f95a106a7c5b3b9d8c588f93342d466d2d2c
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
POWER_SUPPLY_TYPEC_SINK_AUDIO_ADAPTER is not supported on new
kernel-5.4. Update mode to TYPEC_ACCESSORY_AUDIO for analog
type-c headset.
Change-Id: Id46ea2eebea8257a48134431f07a81b6ed7e6c7d
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Disable clock gating when soundwire is out of clock stop mode.
Change-Id: I97187fa2deed26fb3270abee1d05f679ace2c0c4
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
While enabling headphone PA, bypass preref filter
to resolve clipping issue in the first second.
Change-Id: I7524fe3215bac267c5e199c715931712e16adf88
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Disable interrupts while bringing codec out of reset to avoid fake
interrupts.
Change-Id: Iec1e6c67429b7424693c2628e6f6d121a4c9ce71
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update soundwire slave registers as the per hardware specification.
Change-Id: I975d7f12273de2b2eb3d9323b6f781426e18c527
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update dai link names to match with machine driver.
Update typo in audio notifier function name.
Change-Id: I8ada233bbcb1596f245cf1925691c115c2d62755
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add dynamic port enablement for wcd938x and
wcd937x targets to support unified swr tx port
mapping added as part of SWR 1.6 updates.
Change-Id: If0cf823dc51028fd5bd95f5a49ffe05998526be6
Signed-off-by: Ramlal Karra <rkarra@codeaurora.org>
prtd->lsm_client->confidence_levels is allocated in
msm_lsm_get_conf_levels and not freed in msm_lsm_set_conf.
Make this change to free this memory.
Change-Id: I617703b36c13e065fdf995e89121c442b32b08f3
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Process port command DEVICE_STOP with
afe_cmd_lock to avoid any race condition.
Change-Id: I6e888a70e439cb6f3408d00644fb98a85ae53ef4
Signed-off-by: Soumya Managoli <smanag@codeaurora.org>
Update TX HPF sequence for AMIC to avoid pop during
audio capture.
Change-Id: Ib70fc5cd05f67c97977db96487294bfe14f554ad
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
When enabling SVA, tx_mclk_users is not increased. If starting
and stopping recording after enabling SVA, tx_mclk will be closed
when powering down tx mclk widget. Increase tx_mclk_users when
enabling VA_MCLK to avoid mismatch.
Change-Id: I02d9400cf7309464bbba1e6749cfcfcf99f5876a
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Before every slave interrupt handler call, reset slave pending
irq flag, so that if irq is halted it does not retain the old
value.
Change-Id: I2c78500e83eca7864029f58cffa80f8648902fb2
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Increase retry count to check soundwire link status at bootup
inorder for probe to succeed. Handle error scenario if
soundwire probe fails to cleanup device properly.
Change-Id: I4a545530e68221a1f428e05aff3d8a93b1dacf84
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Supply for swr dmic is from wcd mic bias.
Enable the power supply by calling corresponding
interfaces from cdc supply driver.
Change-Id: I9db6a4799ebfdd974d9e12c47053d8d73da2b883
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
