This adds an unnecessary dependency on Python when regular -Werror will do fine.
Change-Id: I81f0e52e7270923f7e3d30a79ec9e9205d47ae0b
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
https://source.android.com/docs/security/bulletin/2022-11-01
* tag 'ASB-2022-11-01_11-5.4' of https://android.googlesource.com/kernel/common:
UPSTREAM: mm/mremap: hold the rmap lock in write mode when moving page table entries.
FROMLIST: binder: fix UAF of alloc->vma in race with munmap()
UPSTREAM: mm: Fix TLB flush for not-first PFNMAP mappings in unmap_region()
UPSTREAM: mm: Force TLB flush for PFNMAP mappings before unlink_file_vma()
UPSTREAM: af_key: Do not call xfrm_probe_algs in parallel
UPSTREAM: wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()
UPSTREAM: wifi: cfg80211/mac80211: reject bad MBSSID elements
UPSTREAM: wifi: cfg80211: ensure length byte is present before access
UPSTREAM: wifi: cfg80211: fix BSS refcounting bugs
UPSTREAM: wifi: cfg80211: avoid nontransmitted BSS list corruption
UPSTREAM: wifi: mac80211_hwsim: avoid mac80211 warning on bad rate
UPSTREAM: wifi: cfg80211: update hidden BSSes to avoid WARN_ON
UPSTREAM: mac80211: mlme: find auth challenge directly
UPSTREAM: wifi: mac80211: don't parse mbssid in assoc response
UPSTREAM: wifi: mac80211: fix MBSSID parsing use-after-free
ANDROID: Drop explicit 'CONFIG_INIT_STACK_ALL_ZERO=y' from gki_defconfig
UPSTREAM: hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
UPSTREAM: hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO
UPSTREAM: hardening: Clarify Kconfig text for auto-var-init
ANDROID: GKI: Update FCNT KMI symbol list
ANDROID: Fix kenelci build-break for !CONFIG_PERF_EVENTS
BACKPORT: HID: steam: Prevent NULL pointer dereference in steam_{recv,send}_report
ANDROID: ABI: Update allowed list for QCOM
UPSTREAM: wifi: mac80211_hwsim: use 32-bit skb cookie
UPSTREAM: wifi: mac80211_hwsim: add back erroneously removed cast
UPSTREAM: wifi: mac80211_hwsim: fix race condition in pending packet
ANDROID: incfs: Add check for ATTR_KILL_SUID and ATTR_MODE in incfs_setattr
Linux 5.4.210
x86/speculation: Add LFENCE to RSB fill sequence
x86/speculation: Add RSB VM Exit protections
macintosh/adb: fix oob read in do_adb_query() function
media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls
selftests: KVM: Handle compiler optimizations in ucall
KVM: Don't null dereference ops->destroy
selftests/bpf: Fix "dubious pointer arithmetic" test
selftests/bpf: Fix test_align verifier log patterns
bpf: Test_verifier, #70 error message updates for 32-bit right shift
selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads
bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()
ACPI: APEI: Better fix to avoid spamming the console with old error logs
ACPI: video: Shortening quirk list by identifying Clevo by board_name only
ACPI: video: Force backlight native for some TongFang devices
thermal: Fix NULL pointer dereferences in of_thermal_ functions
ANDROID: GKI: db845c: Update symbols list and ABI
Linux 5.4.209
scsi: core: Fix race between handling STS_RESOURCE and completion
mt7601u: add USB device ID for some versions of XiaoDu WiFi Dongle.
ARM: crypto: comment out gcc warning that breaks clang builds
sctp: leave the err path free in sctp_stream_init to sctp_stream_free
sfc: disable softirqs for ptp TX
perf symbol: Correct address for bss symbols
virtio-net: fix the race between refill work and close
netfilter: nf_queue: do not allow packet truncation below transport header offset
sctp: fix sleep in atomic context bug in timer handlers
i40e: Fix interface init with MSI interrupts (no MSI-X)
tcp: Fix a data-race around sysctl_tcp_comp_sack_nr.
tcp: Fix a data-race around sysctl_tcp_comp_sack_delay_ns.
Documentation: fix sctp_wmem in ip-sysctl.rst
tcp: Fix a data-race around sysctl_tcp_invalid_ratelimit.
tcp: Fix a data-race around sysctl_tcp_autocorking.
tcp: Fix a data-race around sysctl_tcp_min_rtt_wlen.
tcp: Fix a data-race around sysctl_tcp_min_tso_segs.
net: sungem_phy: Add of_node_put() for reference returned by of_get_parent()
igmp: Fix data-races around sysctl_igmp_qrv.
ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr
net: ping6: Fix memleak in ipv6_renew_options().
tcp: Fix a data-race around sysctl_tcp_challenge_ack_limit.
tcp: Fix a data-race around sysctl_tcp_limit_output_bytes.
scsi: ufs: host: Hold reference returned by of_parse_phandle()
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
tcp: Fix a data-race around sysctl_tcp_nometrics_save.
tcp: Fix a data-race around sysctl_tcp_frto.
tcp: Fix a data-race around sysctl_tcp_adv_win_scale.
tcp: Fix a data-race around sysctl_tcp_app_win.
tcp: Fix data-races around sysctl_tcp_dsack.
s390/archrandom: prevent CPACF trng invocations in interrupt context
ntfs: fix use-after-free in ntfs_ucsncmp()
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put
ANDROID: restore some removed refcount functions
ANDROID: add tty_schedule_flip() back to the kernel
Linux 5.4.208
x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
net: usb: ax88179_178a needs FLAG_SEND_ZLP
tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
tty: drop tty_schedule_flip()
tty: the rest, stop using tty_schedule_flip()
tty: drivers/tty/, stop using tty_schedule_flip()
Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunks
Bluetooth: SCO: Fix sco_send_frame returning skb->len
Bluetooth: Fix passing NULL to PTR_ERR
Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg
Bluetooth: SCO: Replace use of memcpy_from_msg with bt_skb_sendmsg
Bluetooth: Add bt_skb_sendmmsg helper
Bluetooth: Add bt_skb_sendmsg helper
ALSA: memalloc: Align buffer allocations in page size
bitfield.h: Fix "type of reg too small for mask" test
x86/mce: Deduplicate exception handling
mmap locking API: initial implementation as rwsem wrappers
x86/uaccess: Implement macros for CMPXCHG on user addresses
x86: get rid of small constant size cases in raw_copy_{to,from}_user()
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
ima: remove the IMA_TEMPLATE Kconfig option
dlm: fix pending remove if msg allocation fails
bpf: Make sure mac_header was set before using it
mm/mempolicy: fix uninit-value in mpol_rebind_policy()
spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers
tcp: Fix data-races around sysctl_tcp_max_reordering.
tcp: Fix a data-race around sysctl_tcp_rfc1337.
tcp: Fix a data-race around sysctl_tcp_stdurg.
tcp: Fix a data-race around sysctl_tcp_retrans_collapse.
tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
tcp: Fix data-races around sysctl_tcp_recovery.
tcp: Fix a data-race around sysctl_tcp_early_retrans.
tcp: Fix data-races around sysctl knobs related to SYN option.
udp: Fix a data-race around sysctl_udp_l3mdev_accept.
ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
be2net: Fix buffer overflow in be_get_module_eeprom
gpio: pca953x: only use single read/write for No AI mode
ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero
i40e: Fix erroneous adapter reinitialization during recovery process
iavf: Fix handling of dummy receive descriptors
tcp: Fix data-races around sysctl_tcp_fastopen.
tcp: Fix data-races around sysctl_max_syn_backlog.
tcp: Fix a data-race around sysctl_tcp_tw_reuse.
tcp: Fix a data-race around sysctl_tcp_notsent_lowat.
tcp: Fix data-races around some timeout sysctl knobs.
tcp: Fix data-races around sysctl_tcp_reordering.
tcp: Fix data-races around sysctl_tcp_syncookies.
igmp: Fix a data-race around sysctl_igmp_max_memberships.
igmp: Fix data-races around sysctl_igmp_llm_reports.
net/tls: Fix race in TLS device down flow
net: stmmac: fix dma queue left shift overflow issue
i2c: cadence: Change large transfer count reset logic to be unconditional
tcp: Fix a data-race around sysctl_tcp_probe_interval.
tcp: Fix a data-race around sysctl_tcp_probe_threshold.
tcp: Fix a data-race around sysctl_tcp_mtu_probe_floor.
tcp: Fix data-races around sysctl_tcp_min_snd_mss.
tcp: Fix data-races around sysctl_tcp_base_mss.
tcp: Fix data-races around sysctl_tcp_mtu_probing.
tcp/dccp: Fix a data-race around sysctl_tcp_fwmark_accept.
ip: Fix a data-race around sysctl_fwmark_reflect.
ip: Fix data-races around sysctl_ip_nonlocal_bind.
ip: Fix data-races around sysctl_ip_fwd_use_pmtu.
ip: Fix data-races around sysctl_ip_no_pmtu_disc.
igc: Reinstate IGC_REMOVED logic and implement it properly
perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
pinctrl: ralink: Check for null return of devm_kcalloc
power/reset: arm-versatile: Fix refcount leak in versatile_reboot_probe
xfrm: xfrm_policy: fix a possible double xfrm_pols_put() in xfrm_bundle_lookup()
serial: mvebu-uart: correctly report configured baudrate value
PCI: hv: Fix interrupt mapping for multi-MSI
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
PCI: hv: Fix multi-MSI to allow more than one MSI vector
xen/gntdev: Ignore failure to unmap INVALID_GRANT_HANDLE
lockdown: Fix kexec lockdown bypass with ima policy
mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
riscv: add as-options for modules with assembly compontents
pinctrl: stm32: fix optional IRQ support to gpios
Revert "cgroup: Use separate src/dst nodes when preloading css_sets for migration"
Linux 5.4.207
can: m_can: m_can_tx_handler(): fix use after free of skb
serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
serial: stm32: Clear prev values before setting RTS delays
serial: 8250: fix return error code in serial8250_request_std_resource()
tty: serial: samsung_tty: set dma burst_size to 1
usb: dwc3: gadget: Fix event pending check
usb: typec: add missing uevent when partner support PD
USB: serial: ftdi_sio: add Belimo device ids
signal handling: don't use BUG_ON() for debugging
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
soc: ixp4xx/npe: Fix unused match warning
x86: Clear .brk area at early boot
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
ASoC: madera: Fix event generation for rate controls
ASoC: madera: Fix event generation for OUT1 demux
ASoC: cs47l15: Fix event generation for low power mux control
ASoC: wm5110: Fix DRE control
ASoC: ops: Fix off by one in range control validation
net: sfp: fix memory leak in sfp_probe()
nvme: fix regression when disconnect a recovering ctrl
NFC: nxp-nci: don't print header length mismatch on i2c error
net: tipc: fix possible refcount leak in tipc_sk_create()
platform/x86: hp-wmi: Ignore Sanitization Mode event
cpufreq: pmac32-cpufreq: Fix refcount leak bug
netfilter: br_netfilter: do not skip all hooks with 0 priority
virtio_mmio: Restore guest page size on resume
virtio_mmio: Add missing PM calls to freeze/restore
mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: ftgmac100: Hold reference returned by of_get_child_by_name()
ipv4: Fix data-races around sysctl_ip_dynaddr.
raw: Fix a data-race around sysctl_raw_l3mdev_accept.
icmp: Fix a data-race around sysctl_icmp_ratemask.
icmp: Fix a data-race around sysctl_icmp_ratelimit.
drm/i915/gt: Serialize TLB invalidates with GT resets
ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero
ARM: dts: at91: sama5d2: Fix typo in i2s1 node
ipv4: Fix a data-race around sysctl_fib_sync_mem.
icmp: Fix data-races around sysctl.
cipso: Fix data-races around sysctl.
net: Fix data-races around sysctl_mem.
inetpeer: Fix data-races around sysctl.
net: stmmac: dwc-qos: Disable split header for Tegra194
ASoC: sgtl5000: Fix noise on shutdown/remove
ima: Fix a potential integer overflow in ima_appraise_measurement
drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
ARM: 9210/1: Mark the FDT_FIXED sections as shareable
ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
ext4: fix race condition between ext4_write and ext4_convert_inline_data
sched/rt: Disable RT_RUNTIME_SHARE by default
Revert "evm: Fix memleak in init_desc"
nilfs2: fix incorrect masking of permission flags for symlinks
drm/panfrost: Fix shrinker list corruption by madvise IOCTL
cgroup: Use separate src/dst nodes when preloading css_sets for migration
wifi: mac80211: fix queue selection for mesh/OCB interfaces
ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction
ARM: 9213/1: Print message about disabled Spectre workarounds only once
ip: fix dflt addr selection for connected nexthop
net: sock: tracing: Fix sock_exceed_buf_limit not to dereference stale pointer
tracing/histograms: Fix memory leak problem
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model
ALSA: hda - Add fixup for Dell Latitidue E5430
Linux 5.4.206
Revert "mtd: rawnand: gpmi: Fix setting busy timeout setting"
Linux 5.4.205
dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate
dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate
dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly
dmaengine: pl330: Fix lockdep warning about non-static key
ida: don't use BUG_ON() for debugging
dt-bindings: dma: allwinner,sun50i-a64-dma: Fix min/max typo
misc: rtsx_usb: set return value in rsp_buf alloc err path
misc: rtsx_usb: use separate command and response buffers
misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer
dmaengine: imx-sdma: Allow imx8m for imx7 FW revs
i2c: cadence: Unregister the clk notifier in error path
selftests: forwarding: fix error message in learning_test
selftests: forwarding: fix learning_test when h1 supports IFF_UNICAST_FLT
selftests: forwarding: fix flood_unicast_test when h2 supports IFF_UNICAST_FLT
ibmvnic: Properly dispose of all skbs during a failover.
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatible for sama5d2's rtc
pinctrl: sunxi: sunxi_pconf_set: use correct offset
pinctrl: sunxi: a83t: Fix NAND function name for some pins
ARM: meson: Fix refcount leak in meson_smp_prepare_cpus
xfs: remove incorrect ASSERT in xfs_rename
can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits
can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info
powerpc/powernv: delay rng platform device creation until later in boot
video: of_display_timing.h: include errno.h
fbcon: Prevent that screen size is smaller than font size
fbcon: Disallow setting font bigger than screen size
fbmem: Check virtual screen sizes in fb_set_var()
fbdev: fbmem: Fix logo center image dx issue
iommu/vt-d: Fix PCI bus rescan device hot add
net: rose: fix UAF bug caused by rose_t0timer_expiry
usbnet: fix memory leak in error case
can: gs_usb: gs_usb_open/close(): fix memory leak
can: grcan: grcan_probe(): remove extra of_node_get()
can: bcm: use call_rcu() instead of costly synchronize_rcu()
mm/slub: add missing TID updates on slab deactivation
esp: limit skb_page_frag_refill use to a single page
Linux 5.4.204
clocksource/drivers/ixp4xx: remove EXPORT_SYMBOL_GPL from ixp4xx_timer_setup()
net: usb: qmi_wwan: add Telit 0x1070 composition
net: usb: qmi_wwan: add Telit 0x1060 composition
xen/arm: Fix race in RB-tree based P2M accounting
xen/blkfront: force data bouncing when backend is untrusted
xen/netfront: force data bouncing when backend is untrusted
xen/netfront: fix leaking data in shared pages
xen/blkfront: fix leaking data in shared pages
selftests/rseq: Change type of rseq_offset to ptrdiff_t
selftests/rseq: x86-32: use %gs segment selector for accessing rseq thread area
selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread area
selftests/rseq: Fix: work-around asm goto compiler bugs
selftests/rseq: Remove arm/mips asm goto compiler work-around
selftests/rseq: Fix warnings about #if checks of undefined tokens
selftests/rseq: Fix ppc32 offsets by using long rather than off_t
selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store
selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endian
selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35
selftests/rseq: Introduce thread pointer getters
selftests/rseq: Introduce rseq_get_abi() helper
selftests/rseq: Remove volatile from __rseq_abi
selftests/rseq: Remove useless assignment to cpu variable
selftests/rseq: introduce own copy of rseq uapi header
selftests/rseq: remove ARRAY_SIZE define from individual tests
rseq/selftests,x86_64: Add rseq_offset_deref_addv()
ipv6/sit: fix ipip6_tunnel_get_prl return value
sit: use min
net: dsa: bcm_sf2: force pause link settings
hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails
xen/gntdev: Avoid blocking in unmap_grant_pages()
net: tun: avoid disabling NAPI twice
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: bonding: fix use-after-free after 802.3ad slave unbind
net: bonding: fix possible NULL deref in rlb code
net/sched: act_api: Notify user space if any actions were flushed before error
netfilter: nft_dynset: restore set element counter when failing to update
s390: remove unneeded 'select BUILD_BIN2C'
PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
caif_virtio: fix race between virtio_device_ready() and ndo_open()
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
usbnet: fix memory allocation in helpers
linux/dim: Fix divide by 0 in RDMA DIM
RDMA/qedr: Fix reporting QP timeout attribute
net: tun: stop NAPI when detaching queues
net: tun: unlink NAPI from device on destruction
selftests/net: pass ipv6_args to udpgso_bench's IPv6 TCP test
virtio-net: fix race between ndo_open() and virtio_device_ready()
net: usb: ax88179_178a: Fix packet receiving
net: rose: fix UAF bugs caused by timer handler
SUNRPC: Fix READ_PLUS crasher
s390/archrandom: simplify back to earlier design and initialize earlier
dm raid: fix KASAN warning in raid5_add_disks
dm raid: fix accesses beyond end of raid member array
powerpc/bpf: Fix use of user_pt_regs in uapi
powerpc/prom_init: Fix kernel config grep
nvdimm: Fix badblocks clear off-by-one error
ipv6: take care of disable_policy when restoring routes
Linux 5.4.203
crypto: arm/ghash-ce - define fpu before fpu registers are referenced
crypto: arm - use Kconfig based compiler checks for crypto opcodes
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: OMAP2+: drop unnecessary adrl
ARM: 8929/1: use APSR_nzcv instead of r15 as mrc operand
ARM: 8933/1: replace Sun/Solaris style flag on section directive
crypto: arm/sha512-neon - avoid ADRL pseudo instruction
crypto: arm/sha256-neon - avoid ADRL pseudo instruction
ARM: 8971/1: replace the sole use of a symbol with its definition
ARM: 8990/1: use VFP assembler mnemonics in register load/store macros
ARM: 8989/1: use .fpu assembler directives instead of assembler arguments
net: mscc: ocelot: allow unregistered IP multicast flooding
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
powerpc/ftrace: Remove ftrace init tramp once kernel init is complete
drm: remove drm_fb_helper_modinit
Linux 5.4.202
powerpc/pseries: wire up rng during setup_arch()
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
random: update comment from copy_to_user() -> copy_to_iter()
modpost: fix section mismatch check for exported init/exit sections
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
ARM: Fix refcount leak in axxia_boot_secondary
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
ARM: exynos: Fix refcount leak in exynos_map_pmu
ARM: dts: imx6qdl: correct PU regulator ramp delay
powerpc/powernv: wire up rng during setup_arch
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
powerpc: Enable execve syscall exit tracepoint
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
xtensa: Fix refcount leak bug in time.c
xtensa: xtfpga: Fix refcount leak bug in setup
iio: adc: axp288: Override TS pin bias current for some models
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: trigger: sysfs: fix use-after-free on remove
iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()
iio: accel: mma8452: ignore the return value of reset operation
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
usb: chipidea: udc: check request status before setting device address
xhci: turn off port power in shutdown
iio: adc: vf610: fix conversion mode sysfs node name
s390/cpumf: Handle events cycles and instructions identical
gpio: winbond: Fix error code in winbond_gpio_get()
Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
virtio_net: fix xdp_rxq_info bug after suspend/resume
igb: Make DMA faster when CPU is active on the PCIe link
regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
ice: ethtool: advertise 1000M speeds properly
afs: Fix dynamic root getattr
MIPS: Remove repetitive increase irq_err_count
x86/xen: Remove undefined behavior in setup_features()
udmabuf: add back sanity check
net/tls: fix tls_sk_proto_close executed repeatedly
erspan: do not assume transport header is always set
drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms
bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers
phy: aquantia: Fix AN when higher speeds than 1G are not advertised
bpf: Fix request_sock leak in sk lookup helpers
USB: serial: option: add Quectel RM500K module support
USB: serial: option: add Quectel EM05-G modem
USB: serial: option: add Telit LE910Cx 0x1250 composition
random: quiet urandom warning ratelimit suppression message
dm mirror log: clear log bits up to BITS_PER_LONG boundary
dm era: commit metadata in postsuspend after worker stops
ata: libata: add qc->flags in ata_qc_complete_template tracepoint
mtd: rawnand: gpmi: Fix setting busy timeout setting
mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing
net: openvswitch: fix parsing of nw_proto for IPv6 fragments
ALSA: hda/realtek: Add quirk for Clevo PD70PNT
ALSA: hda/realtek - ALC897 headset MIC no sound
ALSA: hda/conexant: Fix missing beep setup
ALSA: hda/via: Fix missing beep setup
random: schedule mix_interrupt_randomness() less often
vt: drop old FONT ioctls
Linux 5.4.201
Revert "hwmon: Make chip parameter for with_info API mandatory"
arm64: mm: Don't invalidate FROM_DEVICE buffers at start of DMA transfer
tcp: drop the hash_32() part from the index calculation
tcp: increase source port perturb table to 2^16
tcp: dynamically allocate the perturb table used by source ports
tcp: add small random increments to the source port
tcp: use different parts of the port_offset for index and offset
tcp: add some entropy in __inet_hash_connect()
usb: gadget: u_ether: fix regression in setting fixed MAC address
dm: remove special-casing of bio-based immutable singleton target on NVMe
s390/mm: use non-quiescing sske for KVM switch to keyed guest
UPSTREAM: ext4: verify dir block before splitting it
UPSTREAM: ext4: fix use-after-free in ext4_rename_dir_prepare
BACKPORT: ext4: Only advertise encrypted_casefold when encryption and unicode are enabled
BACKPORT: ext4: fix no-key deletion for encrypt+casefold
BACKPORT: ext4: optimize match for casefolded encrypted dirs
BACKPORT: ext4: handle casefolding with encryption
Revert "ANDROID: ext4: Handle casefolding with encryption"
Revert "ANDROID: ext4: Optimize match for casefolded encrypted dirs"
ANDROID: cpu/hotplug: avoid breaking Android ABI by fusing cpuhp steps
ANDROID: change function signatures for some random functions.
Revert "mailbox: forward the hrtimer if not queued and under a lock"
Revert "drm: fix EDID struct for old ARM OABI format"
Revert "ALSA: jack: Access input_dev under mutex"
Linux 5.4.200
powerpc/mm: Switch obsolete dssall to .long
riscv: Less inefficient gcc tishift helpers (and export their symbols)
RISC-V: fix barrier() use in <vdso/processor.h>
arm64: kprobes: Use BRK instead of single-step when executing instructions out-of-line
net: openvswitch: fix leak of nested actions
net: openvswitch: fix misuse of the cached connection on tuple changes
net/sched: act_police: more accurate MTU policing
virtio-pci: Remove wrong address verification in vp_del_vqs()
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: fix bug_on ext4_mb_use_inode_pa
dm mirror log: round up region bitmap size to BITS_PER_LONG
serial: 8250: Store to lsr_save_flags after lsr read
usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe
usb: dwc2: Fix memory leak in dwc2_hcd_init
USB: serial: io_ti: add Agilent E5805A support
USB: serial: option: add support for Cinterion MV31 with new baseline
comedi: vmk80xx: fix expression for tx buffer size
i2c: designware: Use standard optional ref clock implementation
irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions
irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions
irqchip/gic/realview: Fix refcount leak in realview_gic_of_init
faddr2line: Fix overlapping text section failures, the sequel
certs/blacklist_hashes.c: fix const confusion in certs blacklist
arm64: ftrace: fix branch range checks
net: bgmac: Fix an erroneous kfree() in bgmac_remove()
mlxsw: spectrum_cnt: Reorder counter pools
misc: atmel-ssc: Fix IRQ check in ssc_probe
tty: goldfish: Fix free_irq() on remove
i40e: Fix call trace in setup_tx_descriptors
i40e: Fix calculating the number of queue pairs
i40e: Fix adding ADQ filter to TC0
clocksource: hyper-v: unexport __init-annotated hv_init_clocksource()
pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE
random: credit cpu and bootloader seeds by default
net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag
ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
ALSA: hda/realtek - Add HW8326 support
scsi: pmcraid: Fix missing resource cleanup in error case
scsi: ipr: Fix missing/incorrect resource cleanup in error case
scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion
scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology
scsi: vmw_pvscsi: Expand vcpuHint to 16 bits
ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()
ASoC: es8328: Fix event generation for deemphasis control
ASoC: wm8962: Fix suspend while playing music
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
ASoC: cs42l56: Correct typo in minimum level for SX volume controls
ASoC: cs42l52: Correct TLV for Bypass Volume
ASoC: cs53l30: Correct number of volume levels on SX controls
ASoC: cs35l36: Update digital volume TLV
ASoC: cs42l52: Fix TLV scales for mixer controls
dma-debug: make things less spammy under memory pressure
ASoC: nau8822: Add operation for internal PLL off and on
powerpc/kasan: Silence KASAN warnings in __get_wchan()
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crypto: drbg - make reseeding from get_random_bytes() synchronous
crypto: drbg - always try to free Jitter RNG instance
crypto: drbg - move dynamic ->reseed_threshold adjustments to __drbg_seed()
crypto: drbg - track whether DRBG was seeded with !rng_is_initialized()
crypto: drbg - prepare for more fine-grained tracking of seeding state
crypto: drbg - always seeded with SP800-90B compliant noise source
Revert "random: use static branch for crng_ready()"
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
siphash: use one source of truth for siphash permutations
random: help compiler out with fast_mix() by using simpler arguments
random: do not use input pool from hard IRQs
random: order timer entropy functions below interrupt functions
random: do not pretend to handle premature next security model
random: use first 128 bits of input as fast init
random: do not use batches when !crng_ready()
random: insist on random_get_entropy() existing in order to simplify
xtensa: use fallback for random_get_entropy() instead of zero
sparc: use fallback for random_get_entropy() instead of zero
um: use fallback for random_get_entropy() instead of zero
x86/tsc: Use fallback for random_get_entropy() instead of zero
nios2: use fallback for random_get_entropy() instead of zero
arm: use fallback for random_get_entropy() instead of zero
mips: use fallback for random_get_entropy() instead of just c0 random
m68k: use fallback for random_get_entropy() instead of zero
timekeeping: Add raw clock fallback for random_get_entropy()
powerpc: define get_cycles macro for arch-override
alpha: define get_cycles macro for arch-override
parisc: define get_cycles macro for arch-override
s390: define get_cycles macro for arch-override
ia64: define get_cycles macro for arch-override
init: call time_init() before rand_initialize()
random: fix sysctl documentation nits
random: document crng_fast_key_erasure() destination possibility
random: make random_get_entropy() return an unsigned long
random: allow partial reads if later user copies fail
random: check for signals every PAGE_SIZE chunk of /dev/[u]random
random: check for signal_pending() outside of need_resched() check
random: do not allow user to keep crng key around on stack
random: do not split fast init input in add_hwgenerator_randomness()
random: mix build-time latent entropy into pool at init
random: re-add removed comment about get_random_{u32,u64} reseeding
random: treat bootloader trust toggle the same way as cpu trust toggle
random: skip fast_init if hwrng provides large chunk of entropy
random: check for signal and try earlier when generating entropy
random: reseed more often immediately after booting
random: make consistent usage of crng_ready()
random: use SipHash as interrupt entropy accumulator
random: replace custom notifier chain with standard one
random: don't let 644 read-only sysctls be written to
random: give sysctl_random_min_urandom_seed a more sensible value
random: do crng pre-init loading in worker rather than irq
random: unify cycles_t and jiffies usage and types
random: cleanup UUID handling
random: only wake up writers after zap if threshold was passed
random: round-robin registers as ulong, not u32
random: clear fast pool, crng, and batches in cpuhp bring up
random: pull add_hwgenerator_randomness() declaration into random.h
random: check for crng_init == 0 in add_device_randomness()
random: unify early init crng load accounting
random: do not take pool spinlock at boot
random: defer fast pool mixing to worker
random: rewrite header introductory comment
random: group sysctl functions
random: group userspace read/write functions
random: group entropy collection functions
random: group entropy extraction functions
random: group crng functions
random: group initialization wait functions
random: remove whitespace and reorder includes
random: remove useless header comment
random: introduce drain_entropy() helper to declutter crng_reseed()
random: deobfuscate irq u32/u64 contributions
random: add proper SPDX header
random: remove unused tracepoints
random: remove ifdef'd out interrupt bench
random: tie batched entropy generation to base_crng generation
random: fix locking for crng_init in crng_reseed()
random: zero buffer after reading entropy from userspace
random: remove outdated INT_MAX >> 6 check in urandom_read()
random: make more consistent use of integer types
random: use hash function for crng_slow_load()
random: use simpler fast key erasure flow on per-cpu keys
random: absorb fast pool into input pool after fast load
random: do not xor RDRAND when writing into /dev/random
random: ensure early RDSEED goes through mixer on init
random: inline leaves of rand_initialize()
random: get rid of secondary crngs
random: use RDSEED instead of RDRAND in entropy extraction
random: fix locking in crng_fast_load()
random: remove batched entropy locking
random: remove use_input_pool parameter from crng_reseed()
random: make credit_entropy_bits() always safe
random: always wake up entropy writers after extraction
random: use linear min-entropy accumulation crediting
random: simplify entropy debiting
random: use computational hash for entropy extraction
random: only call crng_finalize_init() for primary_crng
random: access primary_pool directly rather than through pointer
random: continually use hwgenerator randomness
random: simplify arithmetic function flow in account()
random: selectively clang-format where it makes sense
random: access input_pool_data directly rather than through pointer
random: cleanup fractional entropy shift constants
random: prepend remaining pool constants with POOL_
random: de-duplicate INPUT_POOL constants
random: remove unused OUTPUT_POOL constants
random: rather than entropy_store abstraction, use global
random: remove unused extract_entropy() reserved argument
random: remove incomplete last_data logic
random: cleanup integer types
random: cleanup poolinfo abstraction
random: fix typo in comments
random: don't reset crng_init_cnt on urandom_read()
random: avoid superfluous call to RDRAND in CRNG extraction
random: early initialization of ChaCha constants
random: initialize ChaCha20 constants with correct endianness
random: use IS_ENABLED(CONFIG_NUMA) instead of ifdefs
random: harmonize "crng init done" messages
random: mix bootloader randomness into pool
random: do not re-init if crng_reseed completes before primary init
random: do not sign extend bytes for rotation when mixing
random: use BLAKE2s instead of SHA1 in extraction
random: remove unused irq_flags argument from add_interrupt_randomness()
random: document add_hwgenerator_randomness() with other input functions
crypto: blake2s - adjust include guard naming
crypto: blake2s - include <linux/bug.h> instead of <asm/bug.h>
MAINTAINERS: co-maintain random.c
random: remove dead code left over from blocking pool
random: avoid arch_get_random_seed_long() when collecting IRQ randomness
random: add arch_get_random_*long_early()
powerpc: Use bool in archrandom.h
linux/random.h: Mark CONFIG_ARCH_RANDOM functions __must_check
linux/random.h: Use false with bool
linux/random.h: Remove arch_has_random, arch_has_random_seed
s390: Remove arch_has_random, arch_has_random_seed
powerpc: Remove arch_has_random, arch_has_random_seed
x86: Remove arch_has_random, arch_has_random_seed
random: avoid warnings for !CONFIG_NUMA builds
random: split primary/secondary crng init paths
random: remove some dead code of poolinfo
random: fix typo in add_timer_randomness()
random: Add and use pr_fmt()
random: convert to ENTROPY_BITS for better code readability
random: remove unnecessary unlikely()
random: remove kernel.random.read_wakeup_threshold
random: delete code to pull data into pools
random: remove the blocking pool
random: make /dev/random be almost like /dev/urandom
random: ignore GRND_RANDOM in getentropy(2)
random: add GRND_INSECURE to return best-effort non-cryptographic bytes
random: Add a urandom_read_nowait() for random APIs that don't warn
random: Don't wake crng_init_wait when crng_init == 1
random: don't forget compat_ioctl on urandom
compat_ioctl: remove /dev/random commands
lib/crypto: sha1: re-roll loops to reduce code size
lib/crypto: blake2s: move hmac construction into wireguard
crypto: blake2s - generic C library implementation and selftest
nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION
bpf: Fix incorrect memory charge cost calculation in stack_map_alloc()
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
Revert "ext4: fix use-after-free in ext4_rename_dir_prepare"
Revert "ext4: verify dir block before splitting it"
Linux 5.4.199
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/cpu: Add Lakefield, Alder Lake and Rocket Lake models to the to Intel CPU family
x86/cpu: Add Jasper Lake to Intel family
cpu/speculation: Add prototype for cpu_show_srbds()
Linux 5.4.198
tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N
md/raid0: Ignore RAID0 layout if the second zone has only one device
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
ixgbe: fix unexpected VLAN Rx in promisc mode on VF
ixgbe: fix bcast packets Rx on VF after promisc removal
nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
mmc: block: Fix CQE recovery reset success
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
cifs: return errors during session setup during reconnects
ALSA: hda/conexant - Fix loopback issue with CX20632
scripts/gdb: change kernel config dumping method
vringh: Fix loop descriptors check in the indirect cases
nodemask: Fix return values to be unsigned
cifs: version operations for smb20 unneeded when legacy support disabled
s390/gmap: voluntarily schedule during key setting
nbd: fix io hung while disconnecting device
nbd: fix race between nbd_alloc_config() and module removal
nbd: call genl_unregister_family() first in nbd_cleanup()
x86/cpu: Elide KCSAN for cpu_has() and friends
modpost: fix undefined behavior of is_arm_mapping_symbol()
drm/radeon: fix a possible null pointer dereference
ceph: allow ceph.dir.rctime xattr to be updatable
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
scsi: myrb: Fix up null pointer access on myrb_cleanup()
md: protect md_unregister_thread from reentrancy
watchdog: wdat_wdt: Stop watchdog when rebooting the system
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
serial: msm_serial: disable interrupts in __msm_console_write()
staging: rtl8712: fix uninit-value in r871xu_drv_init()
staging: rtl8712: fix uninit-value in usb_read8() and friends
clocksource/drivers/sp804: Avoid error on multiple instances
extcon: Modify extcon device to be created after driver data is set
misc: rtsx: set NULL intfdata when probe fails
usb: dwc2: gadget: don't reset gadget's driver->bus
USB: hcd-pci: Fully suspend across freeze/thaw cycle
drivers: usb: host: Fix deadlock in oxu_bus_suspend()
drivers: tty: serial: Fix deadlock in sa1100_set_termios()
USB: host: isp116x: check return value after calling platform_get_resource()
drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()
drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()
tty: Fix a possible resource leak in icom_probe
tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()
lkdtm/usercopy: Expand size of "out of frame" object
iio: st_sensors: Add a local lock for protecting odr
iio: dummy: iio_simple_dummy: check the return value of kstrdup()
drm: imx: fix compiler warning with gcc-12
net: altera: Fix refcount leak in altera_tse_mdio_create
ip_gre: test csum_start instead of transport header
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net: ipv6: unexport __init-annotated seg6_hmac_init()
net: xfrm: unexport __init-annotated xfrm4_protocol_init()
net: mdio: unexport __init-annotated mdio_bus_init()
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure
net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_list
bpf, arm64: Clear prog->jited_len along prog->jited
af_unix: Fix a data-race in unix_dgram_peer_wake_me().
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
netfilter: nf_tables: memleak flow rule from commit path
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
netfilter: nat: really support inet nat without l3 address
xprtrdma: treat all calls not a bcall when bc_serv is NULL
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
NFSv4: Don't hold the layoutget locks across multiple RPC calls
dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type
m68knommu: fix undefined reference to `_init_sp'
m68knommu: set ZERO_PAGE() to the allocated zeroed page
i2c: cadence: Increase timeout per message if necessary
f2fs: remove WARN_ON in f2fs_is_valid_blkaddr
tracing: Avoid adding tracer option before update_tracer_options
tracing: Fix sleeping function called from invalid context on RT kernel
mips: cpc: Fix refcount leak in mips_cpc_default_phys_base
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
tipc: check attribute length for bearer name
afs: Fix infinite loop found by xfstest generic/676
tcp: tcp_rtx_synack() can be called from process context
net: sched: add barrier to fix packet stuck problem for lockless qdisc
net/mlx5e: Update netdev features after changing XDP state
net/mlx5: Don't use already freed action pointer
nfp: only report pause frame configuration for physical device
ubi: ubi_create_volume: Fix use-after-free when volume creation failed
jffs2: fix memory leak in jffs2_do_fill_super
modpost: fix removing numeric suffixes
net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register
net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()
net: sched: fixed barrier to prevent skbuff sticking in qdisc backlog
s390/crypto: fix scatterwalk_unmap() callers in AES-GCM
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probe
driver core: fix deadlock in __device_attach
driver: base: fix UAF when driver_attach failed
bus: ti-sysc: Fix warnings for unbind for serial
firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
serial: meson: acquire port->lock in startup()
rtc: mt6397: check return value after calling platform_get_resource()
clocksource/drivers/riscv: Events are stopped during CPU suspend
soc: rockchip: Fix refcount leak in rockchip_grf_init
coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
serial: sifive: Report actual baud base rather than fixed 115200
phy: qcom-qmp: fix pipe-clock imbalance on power-on failure
rpmsg: qcom_smd: Fix returning 0 if irq_of_parse_and_map() fails
iio: adc: sc27xx: Fine tune the scale calibration values
iio: adc: sc27xx: fix read big scale voltage not right
iio: adc: stmpe-adc: Fix wait_for_completion_timeout return value check
firmware: stratix10-svc: fix a missing check on list iterator
usb: dwc3: pci: Fix pm_runtime_get_sync() error checking
rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value
pwm: lp3943: Fix duty calculation in case period was clamped
staging: fieldbus: Fix the error handling path in anybuss_host_common_probe()
usb: musb: Fix missing of_node_put() in omap2430_probe
USB: storage: karma: fix rio_karma_init return
usb: usbip: add missing device lock on tweak configuration cmd
usb: usbip: fix a refcount leak in stub_probe()
tty: serial: fsl_lpuart: fix potential bug when using both of_alias_get_id and ida_simple_get
tty: serial: owl: Fix missing clk_disable_unprepare() in owl_uart_probe
tty: goldfish: Use tty_port_destroy() to destroy port
iio: adc: ad7124: Remove shift from scan_type
staging: greybus: codecs: fix type confusion of list iterator variable
pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
md: bcache: check the return value of kzalloc() in detached_dev_do_request()
block: fix bio_clone_blkg_association() to associate with proper blkcg_gq
bfq: Make sure bfqg for which we are queueing requests is online
bfq: Get rid of __bio_blkcg() usage
bfq: Remove pointless bfq_init_rq() calls
bfq: Drop pointless unlock-lock pair
bfq: Avoid merging queues with different parents
MIPS: IP27: Remove incorrect `cpu_has_fpu' override
RDMA/rxe: Generate a completion for unsupported/invalid opcode
Kconfig: add config option for asm goto w/ outputs
phy: qcom-qmp: fix reset-controller leak on probe errors
blk-iolatency: Fix inflight count imbalances and IO hangs on offline
dt-bindings: gpio: altera: correct interrupt-cells
docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0
ARM: pxa: maybe fix gpio lookup tables
phy: qcom-qmp: fix struct clk leak on probe errors
arm64: dts: qcom: ipq8074: fix the sleep clock frequency
gma500: fix an incorrect NULL check on list iterator
tilcdc: tilcdc_external: fix an incorrect NULL check on list iterator
serial: pch: don't overwrite xmit->buf[0] by x_char
carl9170: tx: fix an incorrect use of list iterator
ASoC: rt5514: Fix event generation for "DSP Voice Wake Up" control
rtl818x: Prevent using not initialized queues
hugetlb: fix huge_pmd_unshare address update
nodemask.h: fix compilation error with GCC12
iommu/msm: Fix an incorrect NULL check on list iterator
um: Fix out-of-bounds read in LDT setup
um: chan_user: Fix winch_tramp() return value
mac80211: upgrade passive scan to active scan on DFS channels after beacon rx
irqchip: irq-xtensa-mx: fix initial IRQ affinity
irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x
RDMA/hfi1: Fix potential integer multiplication overflow errors
Kconfig: Add option for asm goto w/ tied outputs to workaround clang-13 bug
media: coda: Add more H264 levels for CODA960
media: coda: Fix reported H264 profile
mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write
md: fix an incorrect NULL check in md_reload_sb
md: fix an incorrect NULL check in does_sb_need_changing
drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUX
drm/nouveau/clk: Fix an incorrect NULL check on list iterator
drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem
drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabled
scsi: dc395x: Fix a missing check on list iterator
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
dlm: fix missing lkb refcount handling
dlm: fix plock invalid read
mm, compaction: fast_find_migrateblock() should return pfn in the target zone
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
tracing: Fix potential double free in create_var_ref()
ACPI: property: Release subnode properties with data nodes
ext4: avoid cycles in directory h-tree
ext4: verify dir block before splitting it
ext4: fix bug_on in ext4_writepages
ext4: fix warning in ext4_handle_inode_extension
ext4: fix use-after-free in ext4_rename_dir_prepare
netfilter: nf_tables: disallow non-stateful expression in sets earlier
bfq: Track whether bfq_group is still online
bfq: Update cgroup information before merging bio
bfq: Split shared queues on move between cgroups
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
fs-writeback: writeback_sb_inodes:Recalculate 'wrote' according skipped pages
iwlwifi: mvm: fix assert 1F04 upon reconfig
wifi: mac80211: fix use-after-free in chanctx code
f2fs: fix fallocate to use file_modified to update permissions consistently
f2fs: don't need inode lock for system hidden quota
f2fs: fix deadloop in foreground GC
f2fs: fix to clear dirty inode in f2fs_evict_inode()
f2fs: fix to do sanity check on block address in f2fs_do_zero_range()
f2fs: fix to avoid f2fs_bug_on() in dec_valid_node_count()
perf jevents: Fix event syntax error caused by ExtSel
perf c2c: Use stdio interface if slang is not supported
iommu/amd: Increase timeout waiting for GA log enablement
dmaengine: stm32-mdma: remove GISR1 register
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout
NFS: Don't report errors from nfs_pageio_complete() more than once
NFS: Do not report flush errors in nfs_write_end()
NFS: Do not report EINTR/ERESTARTSYS as mapping errors
i2c: at91: Initialize dma_buf in at91_twi_xfer()
i2c: at91: use dma safe buffers
iommu/mediatek: Add list_del in mtk_iommu_remove
f2fs: fix dereference of stale list iterator after loop body
Input: stmfts - do not leave device disabled in stmfts_input_open
RDMA/hfi1: Prevent use of lock before it is initialized
mailbox: forward the hrtimer if not queued and under a lock
mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
macintosh: via-pmu and via-cuda need RTC_LIB
powerpc/perf: Fix the threshold compare group constraint for power9
powerpc/64: Only WARN if __pa()/__va() called with bad addresses
Input: sparcspkr - fix refcount leak in bbc_beep_probe
crypto: cryptd - Protect per-CPU resource by disabling BH.
tty: fix deadlock caused by calling printk() under tty_port->lock
PCI: imx6: Fix PERST# start-up sequence
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
proc: fix dentry/inode overinstantiating under /proc/${pid}/net
powerpc/4xx/cpm: Fix return value of __setup() handler
powerpc/idle: Fix return value of __setup() handler
powerpc/8xx: export 'cpm_setbrg' for modules
dax: fix cache flush on PMD-mapped pages
drivers/base/node.c: fix compaction sysfs file leak
pinctrl: mvebu: Fix irq_of_parse_and_map() return value
nvdimm: Allow overwrite in the presence of disabled dimms
firmware: arm_scmi: Fix list protocols enumeration in the base protocol
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
powerpc/fadump: fix PT_LOAD segment for boot memory area
arm: mediatek: select arch timer for mt7629
crypto: marvell/cesa - ECB does not IV
misc: ocxl: fix possible double free in ocxl_file_register_afu
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
can: xilinx_can: mark bit timing constants as const
KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-Entry
PCI: rockchip: Fix find_first_zero_bit() limit
PCI: cadence: Fix find_first_zero_bit() limit
soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipc
soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipc
ARM: dts: suniv: F1C100: fix watchdog compatible
arm64: dts: rockchip: Move drive-impedance-ohm to emmc phy on rk3399
net/smc: postpone sk_refcnt increment in connect()
rxrpc: Fix decision on when to generate an IDLE ACK
rxrpc: Don't let ack.previousPacket regress
rxrpc: Fix overlapping ACK accounting
rxrpc: Don't try to resend the request if we're receiving the reply
rxrpc: Fix listen() setting the bar too high for the prealloc rings
NFC: hci: fix sleep in atomic context bugs in nfc_hci_hcp_message_tx
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
ext4: reject the 'commit' option on ext2 filesystems
media: ov7670: remove ov7670_power_off from ov7670_remove
sctp: read sk->sk_bound_dev_if once in sctp_rcv()
m68k: math-emu: Fix dependencies of math emulation support
Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout
media: vsp1: Fix offset calculation for plane cropping
media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init
media: exynos4-is: Change clk_disable to clk_disable_unprepare
media: st-delta: Fix PM disable depth imbalance in delta_probe
media: aspeed: Fix an error handling path in aspeed_video_probe()
scripts/faddr2line: Fix overlapping text section failures
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
ASoC: mxs-saif: Fix refcount leak in mxs_saif_probe
ASoC: fsl: Fix refcount leak in imx_sgtl5000_probe
perf/amd/ibs: Use interrupt regs ip for stack unwinding
Revert "cpufreq: Fix possible race in cpufreq online error path"
iomap: iomap_write_failed fix
media: uvcvideo: Fix missing check to determine if element is found in list
drm/msm: return an error pointer in msm_gem_prime_get_sg_table()
drm/msm/mdp5: Return error code in mdp5_mixer_release when deadlock is detected
drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected
regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
irqchip/exiu: Fix acknowledgment of edge triggered interrupts
x86: Fix return value of __setup handlers
virtio_blk: fix the discard_granularity and discard_alignment queue limits
drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()
drm/msm/hdmi: fix error check return value of irq_of_parse_and_map()
drm/msm/hdmi: check return value after calling platform_get_resource_byname()
drm/msm/dsi: fix error checks and return values for DSI xmit functions
drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume
perf tools: Add missing headers needed by util/data.h
ASoC: rk3328: fix disabling mclk on pclk probe failure
x86/speculation: Add missing prototype for unpriv_ebpf_notify()
x86/pm: Fix false positive kmemleak report in msr_build_context()
scsi: ufs: core: Exclude UECxx from SFR dump list
of: overlay: do not break notify on NOTIFY_{OK|STOP}
fsnotify: fix wrong lockdep annotations
inotify: show inotify mask flags in proc fdinfo
ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix
cpufreq: Fix possible race in cpufreq online error path
spi: img-spfi: Fix pm_runtime_get_sync() error checking
sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq
drm/bridge: Fix error handling in analogix_dp_probe
HID: elan: Fix potential double free in elan_input_configured
HID: hid-led: fix maximum brightness for Dream Cheeky
drbd: fix duplicate array initializer
efi: Add missing prototype for efi_capsule_setup_info
NFC: NULL out the dev->rfkill to prevent UAF
spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout
drm: mali-dp: potential dereference of null pointer
drm/komeda: Fix an undefined behavior bug in komeda_plane_add()
nl80211: show SSID for P2P_GO interfaces
bpf: Fix excessive memory allocation in stack_map_alloc()
drm/vc4: txp: Force alpha to be 0xff if it's disabled
drm/vc4: txp: Don't set TXP_VSTART_AT_EOF
drm/mediatek: Fix mtk_cec_mask()
x86/delay: Fix the wrong asm constraint in delay_loop()
ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe
ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe
drm/bridge: adv7511: clean up CEC adapter when probe fails
drm/edid: fix invalid EDID extension block filtering
ath9k: fix ar9003_get_eepmisc
drm: fix EDID struct for old ARM OABI format
RDMA/hfi1: Prevent panic when SDMA is disabled
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
powerpc/powernv: fix missing of_node_put in uv_init()
powerpc/xics: fix refcount leak in icp_opal_init()
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
ARM: versatile: Add missing of_node_put in dcscb_init
fat: add ratelimit to fat*_ent_bread()
powerpc/fadump: Fix fadump to work with a different endian capture kernel
ARM: OMAP1: clock: Fix UART rate reporting algorithm
fs: jfs: fix possible NULL pointer dereference in dbFree()
PM / devfreq: rk3399_dmc: Disable edev on remove()
ARM: dts: ox820: align interrupt controller node name with dtschema
IB/rdmavt: add missing locks in rvt_ruc_loopback
selftests/bpf: fix btf_dump/btf_dump due to recent clang change
eth: tg3: silence the GCC 12 array-bounds warning
rxrpc: Return an error to sendmsg if call failed
hwmon: Make chip parameter for with_info API mandatory
ASoC: max98357a: remove dependency on GPIOLIB
media: exynos4-is: Fix compile warning
net: phy: micrel: Allow probing without .driver_data
nbd: Fix hung on disconnect request if socket is closed before
ASoC: rt5645: Fix errorenous cleanup order
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
openrisc: start CPU timer early in boot
media: cec-adap.c: fix is_configuring state
media: coda: limit frame interval enumeration to supported encoder frame sizes
rtlwifi: Use pr_warn instead of WARN_ONCE
ipmi: Fix pr_fmt to avoid compilation issues
ipmi:ssif: Check for NULL msg when handling events and messages
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
spi: stm32-qspi: Fix wait_cmd timeout in APM mode
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
ASoC: tscs454: Add endianness flag in snd_soc_component_driver
HID: bigben: fix slab-out-of-bounds Write in bigben_probe
drm/amdgpu/ucode: Remove firmware load type check in amdgpu_ucode_free_bo
mlxsw: spectrum_dcb: Do not warn about priority changes
ASoC: dapm: Don't fold register value changes into notifications
net/mlx5: fs, delete the FTE when there are no rules attached to it
ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL
drm: msm: fix error check return value of irq_of_parse_and_map()
arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall
drm/amd/pm: fix the compile warning
drm/plane: Move range check for format_count earlier
scsi: megaraid: Fix error check return value of register_chrdev()
mmc: jz4740: Apply DMA engine limits to maximum segment size
md/bitmap: don't set sb values if can't pass sanity check
media: cx25821: Fix the warning when removing the module
media: pci: cx23885: Fix the error handling in cx23885_initdev()
media: venus: hfi: avoid null dereference in deinit
ath9k: fix QCA9561 PA bias level
drm/amd/pm: fix double free in si_parse_power_table()
tools/power turbostat: fix ICX DRAM power numbers
spi: spi-rspi: Remove setting {src,dst}_{addr,addr_width} based on DMA direction
ALSA: jack: Access input_dev under mutex
drm/komeda: return early if drm_universal_plane_init() fails.
ACPICA: Avoid cache flush inside virtual machines
fbcon: Consistently protect deferred_takeover with console_lock()
ipv6: fix locking issues with loops over idev->addr_list
ipw2x00: Fix potential NULL dereference in libipw_xmit()
b43: Fix assigning negative value to unsigned variable
b43legacy: Fix assigning negative value to unsigned variable
mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes
btrfs: repair super block num_devices automatically
btrfs: add "0x" prefix for unsupported optional features
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
perf/x86/intel: Fix event constraints for ICL
usb: core: hcd: Add support for deferring roothub registration
USB: new quirk for Dell Gen 2 devices
USB: serial: option: add Quectel BG95 modem
ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
binfmt_flat: do not stop relocating GOT entries prematurely on riscv
Conflicts:
Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
Documentation/devicetree/bindings~HEAD
drivers/char/Kconfig
drivers/mmc/core/block.c
kernel/sysctl.c
Change-Id: If11e1865055bfb94b3268960268c88c3dfc032c3
"LA.UM.9.14.r1-20700-LAHAINA.QSSI13.0"
* tag 'LA.UM.9.14.r1-20700-LAHAINA.QSSI13.0' of https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers:
disp: msm: sde: fix min ib vote in mnoc and ebi_ib path
disp: msm: dsi: add support for dsi config
Change-Id: Ie88226bfc57764c185a1e013e9ed6e2a6819a419
"LA.UM.9.14.r1-20700-LAHAINA.QSSI13.0"
* tag 'LA.UM.9.14.r1-20700-LAHAINA.QSSI13.0' of https://git.codelinaro.org/clo/la/platform/vendor/opensource/audio-kernel:
asoc: use virt_sndcard_ctl node for sndcard status update
dsp : search cal block using path in asm
asoc: audio reach kernel bringup on 8255 GVM
ASoC: codecs: Deinitialize mbhc on codec remove
asoc: Add kcontrol "QUAT_TDM_RX_7 Port Mixer TERT_TDM_TX_7"
audio: Modified SSR handling after sub-system shutdown compltes
asoc: remove error from function msm_pinctrl_mclk_enable
Change-Id: I3bad495ed1fe4ec8a3f7c2acb515c9acd96f31da
"LA.UM.9.14.r1-20700-LAHAINA.QSSI13.0"
* tag 'LA.UM.9.14.r1-20700-LAHAINA.QSSI13.0' of https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qcacld-3.0:
Release 2.0.8.31E
qcacld-3.0: Fix the channel for M2 packet in pkt capture mode
Release 2.0.8.31D
qcacld-3.0: Fix peer unmap failure due to invalid roam scan mode value
qcacld-3.0: Skip reset roam trigger during disconnect
Release 2.0.8.31C
qcacld-3.0: Reinitialize mon_register_event before wait_for_completion
Release 2.0.8.31B
qcacld-3.0: Fix the channel for M2 and M4 packets
Release 2.0.8.31A
qcacld-3.0: Init start completion in fw down instead of reovery shutdown
Conflicts:
drivers/staging/qcacld-3.0/core/hdd/src/wlan_hdd_main.c
Change-Id: Ic9a46e6858da1926a4270abdf5e31c92c4679f0a
"LA.UM.9.14.r1-20700-LAHAINA.QSSI13.0"
* tag 'LA.UM.9.14.r1-20700-LAHAINA.QSSI13.0' of https://git.codelinaro.org/clo/la/kernel/msm-5.4:
msm: adsprpc: fix UAF process init_mem
msm: ipa3: Add multi IDU support for external router mode FR
cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree
soc: qcom: socinfo: correct the name of softsku_id
cnss2: Add code to fallback to non-contiguous FW mem allocation
defconfig: sdxlemur: Enable configs on sdxlemur
soc: qcom: socinfo: Get SKU ID from kernel command line
BACKPORT: f2fs: do not set compression bit if kernel doesn't support
UPSTREAM: f2fs: fix UAF in f2fs_available_free_memory
ANDROID: f2fs: check nr_pages for readahead
UPSTREAM: f2fs: guarantee to write dirty data when enabling checkpoint back
FROMGIT: f2fs: flush data when enabling checkpoint back
BACKPORT: f2fs: introduce FI_COMPRESS_RELEASED instead of using IMMUTABLE bit
BACKPORT: f2fs: enforce the immutable flag on open files
BACKPORT: f2fs: change i_compr_blocks of inode to atomic value
BACKPORT: f2fs: make file immutable even if releasing zero compression block
BACKPORT: f2fs: compress: remove unneeded preallocation
ANDROID: binder: fix pending prio state for early exit
ANDROID: binder: fix race in priority restore
ANDROID: binder: switch task argument for binder_thread
ANDROID: binder: pass desired priority by reference
ANDROID: binder: fold common setup of node_prio
BACKPORT: Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put
FROMLIST: binder: fix UAF of ref->proc caused by race condition
Change-Id: I18e9ed7b3659a920fb9048976d171d3666fe4ed3
commit 97113eb39fa7972722ff490b947d8af023e1f6a2 upstream.
To avoid a race between rmap walk and mremap, mremap does
take_rmap_locks(). The lock was taken to ensure that rmap walk don't miss
a page table entry due to PTE moves via move_pagetables(). The kernel
does further optimization of this lock such that if we are going to find
the newly added vma after the old vma, the rmap lock is not taken. This
is because rmap walk would find the vmas in the same order and if we don't
find the page table attached to older vma we would find it with the new
vma which we would iterate later.
As explained in commit eb66ae0308 ("mremap: properly flush TLB before
releasing the page") mremap is special in that it doesn't take ownership
of the page. The optimized version for PUD/PMD aligned mremap also
doesn't hold the ptl lock. This can result in stale TLB entries as show
below.
This patch updates the rmap locking requirement in mremap to handle the race condition
explained below with optimized mremap::
Optmized PMD move
CPU 1 CPU 2 CPU 3
mremap(old_addr, new_addr) page_shrinker/try_to_unmap_one
mmap_write_lock_killable()
addr = old_addr
lock(pte_ptl)
lock(pmd_ptl)
pmd = *old_pmd
pmd_clear(old_pmd)
flush_tlb_range(old_addr)
*new_pmd = pmd
*new_addr = 10; and fills
TLB with new addr
and old pfn
unlock(pmd_ptl)
ptep_clear_flush()
old pfn is free.
Stale TLB entry
Optimized PUD move also suffers from a similar race. Both the above race
condition can be fixed if we force mremap path to take rmap lock.
Bug: 248354871
Link: https://lkml.kernel.org/r/20210616045239.370802-7-aneesh.kumar@linux.ibm.com
Fixes: 2c91bd4a4e ("mm: speed up mremap by 20x on large regions")
Fixes: c49dd3401802 ("mm: speedup mremap on 1GB or larger regions")
Link: https://lore.kernel.org/linux-mm/CAHk-=wgXVR04eBNtxQfevontWnP6FDm+oj5vauQXP3S-huwbPw@mail.gmail.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[patch rewritten for backport since the code was refactored since]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I046ea082f78b4c35c364dca305953a3f9ed28f1d
In commit 720c241924 ("ANDROID: binder: change down_write to
down_read") binder assumed the mmap read lock is sufficient to protect
alloc->vma inside binder_update_page_range(). This used to be accurate
until commit dd2283f260 ("mm: mmap: zap pages with read mmap_sem in
munmap"), which now downgrades the mmap_lock after detaching the vma
from the rbtree in munmap(). Then it proceeds to teardown and free the
vma with only the read lock held.
This means that accesses to alloc->vma in binder_update_page_range() now
will race with vm_area_free() in munmap() and can cause a UAF as shown
in the following KASAN trace:
==================================================================
BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0
Read of size 8 at addr ffff16204ad00600 by task server/558
CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2a0
show_stack+0x18/0x2c
dump_stack+0xf8/0x164
print_address_description.constprop.0+0x9c/0x538
kasan_report+0x120/0x200
__asan_load8+0xa0/0xc4
vm_insert_page+0x7c/0x1f0
binder_update_page_range+0x278/0x50c
binder_alloc_new_buf+0x3f0/0xba0
binder_transaction+0x64c/0x3040
binder_thread_write+0x924/0x2020
binder_ioctl+0x1610/0x2e5c
__arm64_sys_ioctl+0xd4/0x120
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
Allocated by task 559:
kasan_save_stack+0x38/0x6c
__kasan_kmalloc.constprop.0+0xe4/0xf0
kasan_slab_alloc+0x18/0x2c
kmem_cache_alloc+0x1b0/0x2d0
vm_area_alloc+0x28/0x94
mmap_region+0x378/0x920
do_mmap+0x3f0/0x600
vm_mmap_pgoff+0x150/0x17c
ksys_mmap_pgoff+0x284/0x2dc
__arm64_sys_mmap+0x84/0xa4
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
Freed by task 560:
kasan_save_stack+0x38/0x6c
kasan_set_track+0x28/0x40
kasan_set_free_info+0x24/0x4c
__kasan_slab_free+0x100/0x164
kasan_slab_free+0x14/0x20
kmem_cache_free+0xc4/0x34c
vm_area_free+0x1c/0x2c
remove_vma+0x7c/0x94
__do_munmap+0x358/0x710
__vm_munmap+0xbc/0x130
__arm64_sys_munmap+0x4c/0x64
el0_svc_common.constprop.0+0xac/0x270
do_el0_svc+0x38/0xa0
el0_svc+0x1c/0x2c
el0_sync_handler+0xe8/0x114
el0_sync+0x180/0x1c0
[...]
==================================================================
To prevent the race above, revert back to taking the mmap write lock
inside binder_update_page_range(). One might expect an increase of mmap
lock contention. However, binder already serializes these calls via top
level alloc->mutex. Also, there was no performance impact shown when
running the binder benchmark tests.
Note this patch is specific to stable branches 5.4 and 5.10. Since in
newer kernel releases binder no longer caches a pointer to the vma.
Instead, it has been refactored to use vma_lookup() which avoids the
issue described here. This switch was introduced in commit a43cfc87caaf
("android: binder: stop saving a pointer to the VMA").
Bug: 254837884
Link: https://lore.kernel.org/all/20221104175534.307317-1-cmllamas@google.com/
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Change-Id: I87e95bf5c15069f7cb1a0b30186a5f0ed9b1b096
This is a stable-specific patch.
I botched the stable-specific rewrite of
commit b67fbebd4cf98 ("mmu_gather: Force tlb-flush VM_PFNMAP vmas"):
As Hugh pointed out, unmap_region() actually operates on a list of VMAs,
and the variable "vma" merely points to the first VMA in that list.
So if we want to check whether any of the VMAs we're operating on is
PFNMAP or MIXEDMAP, we have to iterate through the list and check each VMA.
Bug: 245812080
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 3998dc50ebdc127ae79b10992856fb76debc2005)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Ib8ddb51815e53f42daec5d98a196866a078a7550
commit b67fbebd4cf980aecbcc750e1462128bffe8ae15 upstream.
Some drivers rely on having all VMAs through which a PFN might be
accessible listed in the rmap for correctness.
However, on X86, it was possible for a VMA with stale TLB entries
to not be listed in the rmap.
This was fixed in mainline with
commit b67fbebd4cf9 ("mmu_gather: Force tlb-flush VM_PFNMAP vmas"),
but that commit relies on preceding refactoring in
commit 18ba064e42df3 ("mmu_gather: Let there be one tlb_{start,end}_vma()
implementation") and commit 1e9fdf21a4339 ("mmu_gather: Remove per arch
tlb_{start,end}_vma()").
This patch provides equivalent protection without needing that
refactoring, by forcing a TLB flush between removing PTEs in
unmap_vmas() and the call to unlink_file_vma() in free_pgtables().
Bug: 245812080
[This is a stable-specific rewrite of the upstream commit!]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Ic29df5cfb76676aa87a14619dd19aba301580507
Signed-off-by: Lee Jones <joneslee@google.com>
[ Upstream commit ba953a9d89a00c078b85f4b190bc1dde66fe16b5 ]
When namespace support was added to xfrm/afkey, it caused the
previously single-threaded call to xfrm_probe_algs to become
multi-threaded. This is buggy and needs to be fixed with a mutex.
Bug: 245674737
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Fixes: 283bc9f35b ("xfrm: Namespacify xfrm state/policy locks")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Change-Id: I71fb89a999447862a6c4b1ff754378bb0452ad3a
Signed-off-by: Lee Jones <joneslee@google.com>
commit aebe9f4639b13a1f4e9a6b42cdd2e38c617b442d upstream.
In the copy code of the elements, we do the following calculation
to reach the end of the MBSSID element:
/* copy the IEs after MBSSID */
cpy_len = mbssid[1] + 2;
This looks fine, however, cpy_len is a u8, the same as mbssid[1],
so the addition of two can overflow. In this case the subsequent
memcpy() will overflow the allocated buffer, since it copies 256
bytes too much due to the way the allocation and memcpy() sizes
are calculated.
Fix this by using size_t for the cpy_len variable.
This fixes CVE-2022-41674.
Bug: 253641805
Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I25a9aebdc6507fd3d7c2aaa7348276afd5da7499
commit 8f033d2becc24aa6bfd2a5c104407963560caabc upstream.
Per spec, the maximum value for the MaxBSSID ('n') indicator is 8,
and the minimum is 1 since a multiple BSSID set with just one BSSID
doesn't make sense (the # of BSSIDs is limited by 2^n).
Limit this in the parsing in both cfg80211 and mac80211, rejecting
any elements with an invalid value.
This fixes potentially bad shifts in the processing of these inside
the cfg80211_gen_new_bssid() function later.
I found this during the investigation of CVE-2022-41674 fixed by the
previous patch.
Bug: 253641805
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Fixes: 78ac51f815 ("mac80211: support multi-bssid")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I26d9765f49e2a0759f70c93b0533cc48bbfddda2
commit 567e14e39e8f8c6997a1378bc3be615afca86063 upstream.
When iterating the elements here, ensure the length byte is
present before checking it to see if the entire element will
fit into the buffer.
Longer term, we should rewrite this code using the type-safe
element iteration macros that check all of this.
Bug: 254180332
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I2ff6215eabd24d0fbb57a9467cdd548523ffbd9b
commit 0b7808818cb9df6680f98996b8e9a439fa7bcc2f upstream.
There are multiple refcounting bugs related to multi-BSSID:
- In bss_ref_get(), if the BSS has a hidden_beacon_bss, then
the bss pointer is overwritten before checking for the
transmitted BSS, which is clearly wrong. Fix this by using
the bss_from_pub() macro.
- In cfg80211_bss_update() we copy the transmitted_bss pointer
from tmp into new, but then if we release new, we'll unref
it erroneously. We already set the pointer and ref it, but
need to NULL it since it was copied from the tmp data.
- In cfg80211_inform_single_bss_data(), if adding to the non-
transmitted list fails, we unlink the BSS and yet still we
return it, but this results in returning an entry without
a reference. We shouldn't return it anyway if it was broken
enough to not get added there.
This fixes CVE-2022-42720.
Bug: 253642015
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: a3584f56de ("cfg80211: Properly track transmitting and non-transmitting BSS")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I0389708d1ada86ab2fa0a7ada203b71f789c506b
commit bcca852027e5878aec911a347407ecc88d6fff7f upstream.
If a non-transmitted BSS shares enough information (both
SSID and BSSID!) with another non-transmitted BSS of a
different AP, then we can find and update it, and then
try to add it to the non-transmitted BSS list. We do a
search for it on the transmitted BSS, but if it's not
there (but belongs to another transmitted BSS), the list
gets corrupted.
Since this is an erroneous situation, simply fail the
list insertion in this case and free the non-transmitted
BSS.
This fixes CVE-2022-42721.
Bug: 253642088
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: If733c3364cdca1ae7f33b2c07d8f872ad2ec5939
commit 1833b6f46d7e2830251a063935ab464256defe22 upstream.
If the tool on the other side (e.g. wmediumd) gets confused
about the rate, we hit a warning in mac80211. Silence that
by effectively duplicating the check here and dropping the
frame silently (in mac80211 it's dropped with the warning).
Bug: 254180332
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I427e5f4d1824d7678d59cd6ed6e490d62e695ecf
commit c90b93b5b782891ebfda49d4e5da36632fefd5d1 upstream.
When updating beacon elements in a non-transmitted BSS,
also update the hidden sub-entries to the same beacon
elements, so that a future update through other paths
won't trigger a WARN_ON().
The warning is triggered because the beacon elements in
the hidden BSSes that are children of the BSS should
always be the same as in the parent.
Bug: 254180332
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Id6db4b0a1a7b7fa1ae300b69aa6176b5a429dff0
Commit 49a765d6785e99157ff5091cc37485732496864e upstream.
There's no need to parse all elements etc. just to find the
authentication challenge - use cfg80211_find_elem() instead.
This also allows us to remove WLAN_EID_CHALLENGE handling
from the element parsing entirely.
Bug: 254180332
Link: https://lore.kernel.org/r/20210920154009.45f9b3a15722.Ice3159ffad03a007d6154cbf1fb3a8c48489e86f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I0be0e5b6c94cd71fc920a1bea44f0e4ac00b79bf
This is simply not valid and simplifies the next commit.
I'll make a separate patch for this in the current main
tree as well.
Bug: 254180332
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Lee: Commit not upstream - plucked straight from Stable)
(cherry picked from commit 9478c5f9c0)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I83b35213bb47506e4c687e2c8be0c53dc497fd98
Commit ff05d4b45dd89b922578dac497dcabf57cf771c6 upstream.
This is a different version of the commit, changed to store
the non-transmitted profile in the elems, and freeing it in
the few places where it's relevant, since that is only the
case when the last argument for parsing (the non-tx BSSID)
is non-NULL.
When we parse a multi-BSSID element, we might point some
element pointers into the allocated nontransmitted_profile.
However, we free this before returning, causing UAF when the
relevant pointers in the parsed elements are accessed.
Fix this by not allocating the scratch buffer separately but
as part of the returned structure instead, that way, there
are no lifetime issues with it.
The scratch buffer introduction as part of the returned data
here is taken from MLO feature work done by Ilan.
This fixes CVE-2022-42719.
Bug: 253642087
Fixes: 5023b14cf4 ("mac80211: support profile split between elements")
Co-developed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I4c6f396d82a1a5754b1d6948c367009d889d40f9
After a backport of commit dcb7c0b9461c ("hardening: Clarify Kconfig
text for auto-var-init"), this becomes redundant, as
CONFIG_INIT_STACK_ALL_ZERO is enabled by default when the compiler
supports it, which results in savedefconfig dropping it.
Change-Id: Ia199fb999f98b936323cb60ecbbdc1ae365932c5
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Now that Clang's -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
option is no longer required, remove it from the command line. Clang 16
and later will warn when it is used, which will cause Kconfig to think
it can't use -ftrivial-auto-var-init=zero at all. Check for whether it
is required and only use it when so.
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-kbuild@vger.kernel.org
Cc: llvm@lists.linux.dev
Cc: stable@vger.kernel.org
Fixes: f02003c860d9 ("hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO")
Signed-off-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit 607e57c6c62c00965ae276902c166834ce73014a)
Change-Id: I30ecd0e5226852b7d5ee12c44c346ac79051a671
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Currently under Clang, CC_HAS_AUTO_VAR_INIT_ZERO requires an extra
-enable flag compared to CC_HAS_AUTO_VAR_INIT_PATTERN. GCC 12[1] will
not, and will happily ignore the Clang-specific flag. However, its
presence on the command-line is both cumbersome and confusing. Due to
GCC's tolerant behavior, though, we can continue to use a single Kconfig
cc-option test for the feature on both compilers, but then drop the
Clang-specific option in the Makefile.
In other words, this patch does not change anything other than making the
compiler command line shorter once GCC supports -ftrivial-auto-var-init=zero.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=a25e0b5e6ac8a77a71c229e0a7b744603365b0e9
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: llvm@lists.linux.dev
Fixes: dcb7c0b9461c ("hardening: Clarify Kconfig text for auto-var-init")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20210914102837.6172-1-will@kernel.org/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit f02003c860d921171be4a27e2893766eb3bc6871)
Change-Id: I572f9d1763dbc7b53f2ad0dc87ba074313f556eb
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Clarify the details around the automatic variable initialization modes
available. Specifically this details the values used for pattern init
and expands on the rationale for zero init safety. Additionally makes
zero init the default when available.
Cc: glider@google.com
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-security-module@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
(cherry picked from commit dcb7c0b9461c2a30f6616262736daac6f01ecb09)
Change-Id: Id2a3b2b2953677e29e6deb931350b04091474b08
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
No new symbols added that are not already in the .xml file.
Bug: 255213935
Change-Id: I826c588a136b3ec06d9f29f1145913705963b0fb
Signed-off-by: Nobutaka Matsuo <matsuo.nobu@fcnt.com>
Kernelci builds were broken if !CONFIG_PERF_EVENTS since 467eb53acd ("ANDROID: cpu/hotplug:
avoid breaking Android ABI by fusing cpuhp steps") causes
perf_event_init_cpu(cpu) to be reduced to "NULL(cpu)":
kernel/cpu.c:1868:21: error: called object type 'void *' is not a function or function pointer
Fixes: 467eb53acd ("ANDROID: cpu/hotplug: avoid breaking Android ABI by fusing cpuhp steps")
Signed-off-by: Todd Kjos <tkjos@google.com>
Change-Id: Ifc7351f74470c87018770395af4b4f6096f0d73f
commit cd11d1a6114bd4bc6450ae59f6e110ec47362126 upstream.
It is possible for a malicious device to forgo submitting a Feature
Report. The HID Steam driver presently makes no prevision for this
and de-references the 'struct hid_report' pointer obtained from the
HID devices without first checking its validity. Let's change that.
Bug: 223455965
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Fixes: c164d6abf3 ("HID: add driver for Valve Steam Controller")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Ica12507b87309a7c46b4cab6fcfe4499cd96f45d
Update the android/abi_gki_aarch64_qcom with API refcount_warn_saturate.
Bug: 244699106
Change-Id: Iee45f9e7ab3cc24b678fac28b5981c0e44745769
Signed-off-by: Srinivasarao Pathipati <quic_spathi@quicinc.com>
Android S VTS test case GetLinkLayerStats_1_5 need get interface time
slice duty cycle info. VTS will get it over vendor command
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET.
So, we need put time slice duty cycle percentage in structure
wifi_interface_info.
Change-Id: Iff644b4b1ed6dd34badc2008d2957c98e0207aa6
CRs-Fixed: 3040005
Add a new attribute into qca_wlan_vendor_attr_ll_stats_results to
support getting interface time slicing duty cycle info.
Change-Id: If6a34cd298c1cb41e0e29a24f2336eed76b98329
CRs-Fixed: 3020795
The $val in both functions has a range between 0 and an arbitrary limit
whereas the range specified with the $min and $max can start
from a negative number. To do the out of bound check correctly, the
$val must be added the $min offset.
Previous-discussion: https://lore.kernel.org/all/c2163c71-2f71-9011-3966-baeab8e8dc8f@gmail.com/
Fixes: 4f1e50d6a9cf9 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()")
Fixes: 4cf28e9ae6e2e ("ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx()")
Signed-off-by: Tan Nayir <tannayir@gmail.com>
Change-Id: I8a220daaeb943a1933464f6914b1f175fdfaf5a8
* Also rely on userspace writing to /dev/wlan, Wi-Fi
HAL writes "ON" or "OFF" to /dev/wlan.
* Use this method to initialize hdd as it's a safer
way to ensure both wlan_mac.bin and WCNSS_qcom_cfg.ini
are ready to be read.
* This also eliminates the needs for horrible hacks
to read the userspace file.
Change-Id: I648f1a107c095e50a64f44c39e78d6b6f917e190
exfat: release 5.19.1 version
Major changes are:
- fix referencing wrong parent directory information during rename.
- introduce a sys_tz mount option to use system timezone.
- improve performance while zeroing a cluster with dirsync mount option.
- fix slab-out-bounds in exat_clear_bitmap() reported from syzbot.
- Add keep_last_dots mount option to allow access to paths with trailing dots.
- Avoid repetitive volume dirty bit set/clear to improve storage life time.
- Fix ->i_blocks truncation issue that still exists elsewhere.
- 4 cleanups & typos fixes.
- Move super block magic number to magic.h
- Fix missing REQ_SYNC in exfat_update_bhs().
- Fix ->i_blocks truncation issue caused by wrong 32bit mask.
Conflicts:
fs/exfat/Kconfig
fs/exfat/Makefile
fs/exfat/balloc.c
fs/exfat/cache.c
fs/exfat/dir.c
fs/exfat/exfat_fs.h
fs/exfat/exfat_raw.h
fs/exfat/fatent.c
fs/exfat/file.c
fs/exfat/inode.c
fs/exfat/misc.c
fs/exfat/namei.c
fs/exfat/nls.c
fs/exfat/super.c
Change-Id: I5fd39768b9fb0419602fc77153de39291e6a1f1d
* commit 'e454f7b1c1':
ARM: dts: msm: Add camera dtsi for qcs610
ARM: dts: msm: Add camera sensor DTSI for RB1 & RB2
ARM: dts: msm: Handle shared gpio among multiple I2C flash nodes
ARM: dts: msm: Add camera sensor DTSI for QRB2210
ARM: dts: msm: Correct csid clock rate in Blair Camera
ARM: dts: msm: Add shared gpio node for I2C flash for holi Pro
ARM: dts: msm: Add flash node to Camera on Blair QRD
ARM: dts: msm: Add shared gpio node for I2C flash for blair
ARM: dts: msm: Add camera definition for blair QRD
ARM: dts: msm: Revert cx-ipeak support from Blair Camera
ARM: dts: msm: Add I2C flash node for blair
ARM: dts: msm: Add I2C flash node for holi pro
ARM: dts: msm: Add Vaf in sensor node for target holi
ARM: dts: msm: Remove cci3 gpios for holi
ARM: dts: msm: Update the phy timer clock for phy 3 in holi
ARM: dts: msm: Add fix for regulator voltage for holi camera
ARM: dts: msm: Add nominal clock cntl level for CSIPHY for holi
Change-Id: I725c0615af7c86ea1232aa536eec8a5d3110e9c3
* commit '1e0b2efd0c':
ARM: dts: msm: Modify GPIO28 functionality as per pinctrl change
ARM: dts: msm: Disable LPM States for SDXLEMUR + QCN9000
ARM: dts: msm: Limit the PCIe speed to Gen3 for sdxlemur
bindings: power: reset: Add qcom-dload-mode bindings for SDX65
ARM: dts: msm: Add BOOT_CONFIG register offset for sdxlemur
ARM: dts: msm: Updating the PHY version for sdxlemur
ARM: dts: qcom: Set right IRQ type to MHI interrupt
ARM: dts: msm: Fix ipq attach property for sdx driver
ARM: dts: msm: correct SSCTL instance ID for SMP2P shutdown ack from modem
ARM: dts: msm: Enable ipa register dump collection
ARM: dts: msm: Enable sdx-ext-ipc driver
ARM: dts: msm: Remove mpm wakeup control capability for yupik
ARM: dts: msm: Reducing throughput thresholds
ARM: dts: msm: Enable focaltech touch node for r66451 on Blair CDP
ARM: dts: msm: Added delay for Napa PHY to come of reset
ARM: dts: msm: Update the modem size to 102MB
ARM: dts: msm: Add LPM info for menu governor
ARM: dts: msm: Added delay for AQR113 PHY to come of reset
ARM: dts: msm: Add LPM info for menu governor
ARM: dts: qcom: Enable QCN9000 nodes for sdxlemur-mtp-cpe-pine2x
ARM: dts: msm: Add additional v2 variant for sdxlemur board
ARM: dts: qcom: add mode control for S8B regulator for yupik
ARM: dts: msm: Enable subsystem_sleep_stats driver for lahaina
dt-bindings: subsystem_sleep_stats: reg is optional property
dt-bindings: subsystem_sleep_stats: Add reg as required property
dt-bindings: thermal: Add snapshot of devfreq-vdd-cdev
ARM: dts: msm: update thermal config for sdxlemur
ARM: dts: msm: remove gfx-cdev for blair
ARM: dts: msm: add devfreq-vdd-cdev cooling device and remove gfx-cdev
dt-bindings: thermal: Add snapshot of modem cdev dt binding
ARM: dts: msm: update modem qmi sensor name
ARM: dts: qcom: Update mdm tsens thermal config for sdxlemur
ARM: dts: msm: Remove IOSS interface from AQC, RTL and QPS615
ARM: dts: msm: Enable smmu s1 for blsp bam on sdxlemur V2
ARM: dts: msm: Enable bluetooth for sdxlemur CPE variants
ARM: dts: qcom: reduce L4B regulator min voltage to 880 mV for sdxlemur
ARM: dts: qcom: EP GPIO reset mask update
ARM: dts: qcom: PCIe REFCLK always on
ARM: dts: msm: Ensure PCIe device is not in D3hot during reboot
ARM: dts: msm: Enable WOL for QCA8081 on sdxlemur
ARM: dts: msm: Enable WAKE_PHY for AQR113 on sdxlemur
ARM: dts: qcom: Fix qrtr_instance_id and qrtr_node_id for QCN9000
Revert "Revert "ARM: dts: msm: PCIe turn-on of NTN3 regulator""
ARM: dts: msm: Add IOSS channels directly under device
ARM: dts: msm: Set default_gen_speed to 0
ARM: dts: msm: Enable best fit algo on sdxlemur
ARM: dts: msm: Includes cnss devicetree dtsi file
ARM: dts: msm: Add support for ETH nodes
ARM: dts: msm: Enable USB2/PCIE for yupik iot with pm7250b
ARM: dts: msm: Add AQC and R8125 dtsi nodes
Revert "ARM: dts: msm: PCIe turn-on of NTN3 regulator"
ARM: dts: msm: Modify the usb dma address pool on sdxlemur
ARM: dts: msm: PHY regulator ramp delays
ARM: dts: msm: Set the interrupt moderation interval to 1ms on sdxlemur
ARM: dts: msm: Enable bluetooth for sdxlemur mtp cpe
ARM: dts: qcom: PCIe to Gen3 , DSP2 HSP in Gen2
ARM: dts: msm: Correct lpi offset table for holi
ARM: dts: msm: Add additional v2 variants for sdxlemur boards
ARM: dts: msm: correction to the cps related properties
ARM: dts: msm: Add pil modem regulator for sdxlemur v2
ARM: dts: msm: Revise V2 dts and add sdxlemur lite soc id
ARM: dts: msm: Modify cpufreq to ddrfreq table
ARM: dts: msm: Bump up cpu frequency
ARM: dts: msm: Update of RC PCIe PHY settings to V1.08 for sdxlemur
ARM: dts: msm: Update of EP PCIe PHY settings to V1.08 for sdxlemur
ARM: dts: qcom: Disabling dt node for sdx ipc driver
ARM: dts: msm: Remove BT property bt-sw-ctrl-gpio for sdxlemur
ARM: dts: msm: Update smmu s1 mask on sdxlemur V2
ARM: dts: qcom: Add separate cpu dai for mi2s rx and tx
ARM: dts: msm: PHY reset GPIO properties
ARM: dts: msm: Update compatible for HSP on Yupik
ARM: dts: qcom: Set default_gen_speed as gen3 for sdx65
ARM: dts: msm: Enable KPDPWR status logging
dt-bindings: input: qpnp-power-on: Add qcom,log-kpd-event description
ARM: dts: msm: Pin config for AQR on MBB
ARM: dts: msm: PCIe turn-on of NTN3 regulator
ARM: dts: msm: PHY supply DTSI properties
ARM: dts: qcom: Enable link enumeration via perst
ARM: dts: msm: disable LAN RX NAPI
ARM: dts: msm: Separating AQR & Napa Ring descriptions
ARM: dts: msm: Update CPU frequencies for sdxlemur v2
ARM: dts: msm: WoL IRQ support for AQR
ARM: dts: msm: add ntn3 ipa pcie changes for MBB
ARM: dts: msm: Enable separate IPA instance ID and IOMMU group for Napa
ARM: dts: msm: Add GPU revision for Yupik A643 target
ARM: dts: msm: Add pm7250b dts variant for yupik iot
ARM: dts: msm: WoL IRQ support for AQR and Napa PHYs
ARM: dts: qcom: Remove redundant entries in sdxlemur-qcn9000.dtsi
ARM: dts: msm: Enable bluetooth for v2 sdxlemur
ARM: dts: msm: Disable L1 mode on sdxlemur ep variants
ARM: dts: msm: Skip BW vote for PM8008 used I2C SE node
ARM: dts: msm: Add keepalive flag for QUP for Blair/Holi
ARM: dts: msm: Prevent PM8008 LPM usage for all targets
ARM: dts: msm: add nvmem cell for PMK8350 SDAM23 adc scaling
ARM: dts: msm: Add support for HSP BT SoC
ARM: dts: msm: put ipa_eth_group1 in bypass mode
ARM: dts: msm: Remove support for PCIE1 and USB3_SEC clocks on YUPIK HSP
ARM: dts: qcom: Add support to read ibat_external_range from nvmem for yupik
dt-bindings: thermal: Add support to scale ibat current range to bcl driver
ARM: dts: msm: Add HSP property in CNSS DT Node
ARM: dts: msm: Add gpu-models property for yupik gpu
ARM: dts: msm: Add CNSS DT Node for HSP support
ARM: dts: qcom: Add IPA register for QCN9000
ARM: dts: msm: Add support for HSP for Yupik
ARM: dts: msm: Remove separate DT for digital mics for Yupik
ARM: dts: msm: Restore SDCC registers once Resuming from CX/XO
ARM: dts: msm: Add keepalive flag for QUP for Blair/Holi
ARM: dts: msm: remove qcom,power-always-on dt property
ARM: dts: msm: Fix EP PCIe perst pinctrl settings on sdxlemur
ARM: dts: msm: enable reg dump collection
ARM: dts: qcom: Add ipq807x_attach property for IPQ807x host
ARM: dts: qcom: Add device tree entry for sdx ipc driver
bindings: arm: msm: Add documentation for sdx ipc driver
ARM: dts: msm: qcom: Add pm7250b support for Blair-MTP-USBC platform
ARM: dts: msm: Add dual NIC IPA support
ARM: dts: msm: Pin config for AQR and Napa INTN_WOL
ARM: dts: qcom: PCIe to Gen3 for NTN3 CPE Pine1x
ARM: dts: msm: NTN3 De-emphasis values update CPE
ARM: dts: msm: Enable SMMU S1 support for eMMC on sdxlemur
ARM: dts: msm: Rename L1 disable property for blair
ARM: dts: qcom: Add Support for QCN9000 for MTP CPE
ARM: dts: qcom: Move all WLAN configs out of sdxlemur-mtp-cpe.dtsi
ARM: dts: msm: Rename L1 disable property to align with driver
ARM: dts: qcom: Update hvx and skin config rules for BLAIR
ARM: dts: msm: Remove unused smps regulator
ARM: dts: msm: Remove unused smps regulator
ARM: dts: msm: add AW2016 LED device nodes for blair platforms
ARM: dts: msm: change wdi3 holb timeout
ARM: dts: msm: Skip BW vote for PM8008 used I2C SE node
ARM: dts: msm: Add qos silver cores to device tree
ARM: dts: msm: Add changes for blair USBC target
ARM: dts: msm: Add AW2016 LED device nodes for Holi-m6125 platforms
ARM: dts: msm: Add disable u1 quirk and u2 quirk for blair
ARM: dts: msm: qcom: Update refgen node for blair-atp platform
ARM: dts: msm: Restore SDCC registers once Resuming from CX/XO
ARM: dts: msm: Add cx_misc register map for yupik GPU
ARM: dts: msm: Add changes to support ATP on blair
ARM: dts: msm: add tzpu_ctx dump entry
ARM: dts: msm: Updating MTP-USBC platform dtb for blair target
ARM: dts: msm: Enable display on Blair ATP platform
ARM: dts: msm: Ignore SSR failure for wpss
ARM: dts: msm: qcom: Fix proxy-supply for blair regulator nodes
ARM: dts: msm: Align sdxlemur BT config with sdxprairie
ARM: dts: msm: updating modem_tj mitigation for LAHAINA
dt-bindings: leds: Add bindings for AW2016 LED device
dt-bindings: Add awinic vendor name
ARM: dts: msm: updated memory map v1 for blair
ARM: dts: qcom: Add modem mitigation for bcl violation in lahaina
ARM: dts: msm: Update USB2 core frequency for yupik
ARM: dts: msm: Change cpu frequency for V2 hardware
ARM: dts: msm: Enable display on Blair ATP platform
ARM: dts: msm: Add pm-qos-latency dt node for sdxlemur
ARM: dts: msm: Enable link recovery for config space access fail
ARM: dts: msm: Disable Skin config rules for BLAIR
ARM: dts: msm: disable ipa-uc-holb-monitor
ARM: dts: msm: disable masking MSI interrupts at EP side
ARM: dts: msm: Adding updated PHY tune parameters for blair
dt-bindings: pcie: Notify client for config space access issues
ARM: dts: msm: Add support of 608Mhz GPU FMAX for yupik
ARM: dts: msm: enable LAN RX NAPI
ARM: dts: msm: add ADC device instance for PMR735A on holi-pm6125
dt-bindings: iio: qcom,spmi-vadc: Add SW-calibrated ADC bindings
ARM: dts: msm: Enable cxipeak support for blair
ARM: dts: msm: Add APPS_APM_STATUS register for blair
ARM: dts: msm: Update dcc registers for blair
ARM: dts: msm: Add disable L1 quirk in HS mode for blair
ARM: dts: msm: Modify ss phy initialization sequence on sdxnightjar
Revert "ARM: dts: msm: Set qcom,rmnet_in_use_tcm_mem with RMNET composition"
ARM: dts: msm: Add device tree for M.2 USB mode on sdxlemur
ARM: dts: qcom: enable cx ipeak lm separately for blair and holi-pm6125
ARM: dts: msm: add ntn3 ipa pcie changes
ARM: dts: msm: Mark PMIC QUPs as critical clock devices for BLAIR
ARM: dts: msm: Add wdog bite IRQ for pil modem
ARM: dts: msm: update clk tput threshold for IPA on Olympic
ARM: dts: msm: Update mode threshold current of L6C of yupik
ARM: dts: msm: Add support to sync charger/qg probe with vadc
ARM: dts: msm: set need unvote flag 0
ARM: dts: msm: Update BCL thermal mitigation config for HOLI
ARM: dts: msm: rename sound card for QRD blair
ARM: dts: msm: Add APPS_APM_STATUS register for blair
ARM: dts: msm: Correct #address-cells property for PM6125
ARM: dts: msm: Add FnR stats support flag for holi target
ARM: dts: msm: Add disable L1 quirk in HS mode for sdxnightjar
ARM: dts: msm: Enable QPIC display for sdxlemur
ARM: dts: msm: Update spmi debugfs nodes for yupik with PM7250B
Revert "ARM: dts: msm: Add UFS ICE HW controlled clock for yupik"
ARM: dts: msm: Add interrupt mask offset for EUD for sdxlemur
dt-bindings: Add optional EUD parameter for interrupt mask
ARM: dts: msm: Add disable L1 quirk in HS mode for blair
ARM: dts: msm: Update dcc registers for blair
ARM: dts: msm: Add skin and mmw thermal config for YUPIK
ARM: dts: msm: Include camera sensor dtsi for blair QRD
ARM: dts: msm: Add support for mpm interrupts on blair
ARM: dts: msm: Give Blair its own MPM pins mapping configuration
ARM: dts: msm: Replace regulator value for vdd-pdphy-supply on blair
ARM: dts: msm: correct l2_cache dump size on blair
ARM: dts: msm: Add support for mpm interrupts on blair
ARM: dts: msm: Add a new property for Blair touch
ARM: dts: msm: Enable cxipeak support for BLAIR
ARM: dts: msm: Disable NAP power feature for blair GPU
Revert "ARM: dts: msm: Add video support for KODIAC-IOT target"
ARM: dts: msm: Add QRTR MHI DEV device for sdxlemur
dt-bindings: net: qrtr: Add MHI Device transport bindings
ARM: dts: msm: Add device trees for sdxlemur M.2, Pine variants
ARM: dts: msm: Replace regulator value for vdd-pdphy-supply on blair
ARM: dts: msm: Add support for usb nodes on blair
ARM: dts: msm: Add device trees for sdxlemur + IPQ8074
ARM: dts: msm: Add nopmi support for holi-pm6125 and blair
ARM: dts: msm: Add clkreq gpio for PCIe nodes for yupik
ARM: dts: msm: Fix resource-name and id for holi-pm6125-regulator
ARM: dts: msm: Updating ATP platform dtb for blair target
ARM: dts: msm: correct l2_cache dump size on blair
ARM: dts: msm: Set proper vddpx supply
ARM: dts: msm: add ntn3/qps615 pci DT nodes for sdxlemur
ARM: dts: qcom: Limit PCIe to Gen3 for oculink connects on sdxlemur
ARM: dts: msm: Add camera device tree inclusions for Blair camera
ARM: dts: msm: Include camera sensor dtsi for QRD Holi-pm6125
ARM: dts: msm: Vote for S5A during BT operations
ARM: dts: msm: Vote for S5A during wlan operations
ARM: dts: msm: Add support for usb nodes on blair
ARM: dts: msm: Include camera sensor dtsi for blair QRD
bindings: input: qcom-hv-haptics: Add "qcom,pm5100-haptics"
ARM: dts: msm: update ADC channels for holi-pm6125
ARM: dts: msm: Update QG cutoff/empty thresholds for blair/holi-pm6125
ARM: dts: msm: include display nodes for Blair qrd
ARM: dts: msm: Add UFS regulators for qrd holi-pm6125
ARM: dts: msm: Give Blair its own MPM pins mapping configuration
ARM: dts: msm: disable mss cti on holi
ARM: dts: msm: Remove unused static supply for holi-pm6125
ARM: dts: msm: Add extcon phandle for usb0 on blair cdp
ARM: dts: msm: Correct SPMI node name for holi-pm6125 ADC_TM
ARM: dts: msm: Add extcon phandle for usb0 on blair cdp
ARM: dts: msm: Remove unused static supply for holi-pm6125
ARM: dts: msm: Include camera sensor dtsi for blair QRD
ARM: dts: msm: change vdd supply for WSA
ARM: dts: msm: Add touch for QRD Blair
ARM: dts: msm: include display nodes for Blair qrd
ARM: dts: msm: Add UFS regulators for qrd blair
ARM: dts: msm: Add touch for QRD Holi-pm6125
ARM: dts: msm: Add I2C NFC device node for holi pro QRD variant
ARM: dts: msm: Add UFS regulators for qrd holi-pm6125
ARM: dts: msm: include display nodes for pm6125 platform of Holi qrd target
ARM: dts: msm: correct dump entry size
ARM: dts: msm: increase dump entries size in blair
ARM: dts: msm: Enable cpufreq cooling device for BLAIR
ARM: dts: msm: Add camera device tree inclusions for Blair camera
ARM: dts: msm: Updating platform dtb(s) for blair targetr
ARM: dts: msm: Set proper wsa reset gpio
ARM: dts: msm: Add support for usb nodes on blair
ARM: dts: msm: Removing signal-aop from pils on Blair
ARM: dts: msm: Update DLL values as per HSR for blair
ARM: dts: msm: Disable TBU halting for pcie tbu on sdxlemur
ARM: dts: msm: change vdd supply for WSA
ARM: dts: msm: Set proper wsa reset gpio
ARM: dts: msm: Add touch for QRD Blair
ARM: dts: msm: Add UFS regulators for qrd blair
ARM: dts: msm: Remove the audio ION CMA heap for sdxlemur
ARM: dts: msm: Add a carveout heap for audio usecases on sdxlemur
ARM: dts: msm: Add an audio ION device node for the audio carveout heap
ARM: dts: msm: Update the memory map for 1 GB variants of sdxlemur
ARM: dts: msm: Removing signal-aop from pils on Blair
ARM: dts: msm: use dummy regulator for new QRD Holi
ARM: dts: msm: Add touch for QRD Holi-pm6125
ARM: dts: msm: Update DLL values as per HSR for blair
ARM: dts: msm: correct dump entry size
ARM: dts: msm: increase dump entries size in blair
ARM: dts: msm: Enable cpufreq cooling device for BLAIR
ARM: dts: qcom: enable cx ipeak common driver for holi-pm6125
dt-bindings: Add victims_table bindings for cx_ipeak driver
ARM: dts: msm: Updating platform dtb(s) for blair targetr
ARM: dts: msm: Add I2C NFC device node for holi pro QRD variant
ARM: dts: msm: add cpulist to compute mon governor in blair target
ARM: dts: msm: include display nodes for pm6125 platform of Holi qrd target
ARM: dts: msm: Update board-id for PM7250B
ARM: dts: msm: Add DT support for nopmi on Blair target
ARM: dts: msm: Add initial MTP-USBC platform device tree for Blair
ARM: dts: msm: add PM7250B and SMB1394 to sdxlemur-mtp-mbb-emmc boards
ARM: dts: msm: add remote debugger support
ARM: dts: msm: add msm poweroff node on qcs405
ARM: dts: msm: Enable modem subsystem
ARM: dts: msm: Add BCL configuration for yupik IDP with PM7250B
ARM: dts: msm: Enable BT for Scuba
ARM: dts: msm: Add video support for KODIAC-IOT target
ARM: dts: msm: Update min-access length for monaco IoT
ARM: dts: msm: Include camera DTSi files for monaco
ARM: dts: msm: Enable DP and NON DP in rename block
ARM: dts: msm: Add audio definition for QRD Holi-pm6125
ARM: dts: msm: Include pm5100 and pm8010 regulators for monaco
ARM: dts: msm: Add apss dl cti0 for yupik
ARM: dts: msm: Add apss dl cti0 for shima
ARM: dts: msm: updated qseecom mem node
ARM: dts: msm: Add support for Blair QRD platform
ARM: dts: msm: Enable multiport USB for SA8195 LA GVM
ARM: dts: msm: Update dpdm_supply for USB for Monaco
ARM: dts: msm: Add initial ION heaps for SA2150P
ARM: dts: msm: Update UFS phy regulator peak current for blair
ARM: dts: msm: Add aop_send_message device node interface for sdmshrike
ARM: dts: msm: Enable IPA node for monaco target
ARM: dts: msm: add display support for monaco IDP
ARM: dts: msm: Add aop_send_message device node interface for SA6155
ARM: dts: msm: Add aop_send_message device node interface for SA8155
ARM: dts: qcom: enable gpu mitigation for TSENS and BCL for monaco
ARM: dts: msm: Remove unused static supplies for holi-pm6125
ARM: dts: msm: Fix regulator naming for pm8010
ARM: dts: msm: Fix ldoa3 regulator for monaco
ARM: dts: msm: add touch support of lcd panel for Blair target
ARM: dts: msm: include display nodes for Blair target
ARM: dts: msm: use dummy regulator for 3V eLDO supply of touch on Holi
ARM: dts: msm: Set allowable min volt of L9B to 1.2V for Yupik
ARM: dts: msm: Enable modem pa sensor config only for YUPIK QRD
ARM: dts: qcom: Add thermal overlay devicetree support for holi-pm6125
dt-bindings: kgsl: Add compatible property in qcom,gpu-model
ARM: dts: msm: Add pin controls for camera GPIOs
ARM: dts: msm: add RPM managed regulator devices for QCS405
ARM: dts: msm: Add rpm-smd node for qcs405
ARM: dts: msm: Add smb1394 support for holi-pm6125
ARM: dts: qcom: Add flash pinctrl gpio for blair
ARM: dts: msm: Update ADC support for PM6125
ARM: dts: qcom: add ipc and codec cdev nodes
ARM: dts: msm: Remove generic labels for regulators
ARM: dts: msm: Update the LDO2/3A min-max voltages
ARM: dts: msm: Disable EP initiated BW scaling on switch for sdxlemur
ARM: dts: msm: Fix incorrect regulator label references
ARM: dts: msm: Add cnss dtsi to cpe
ARM: dts: msm: Set qcom,rmnet_in_use_tcm_mem with RMNET composition
ARM: dts: qcom: enable pmic alarm sensor and BCL thermal zones for monaco
ARM: dts: qcom: Remove duplicate thermal zone phandle for monaco
dt-bindings: Add dt bindings for silent boot mode
ARM: dts: qcom: Enable cx ipeak cooling device configuration for holi
ARM: dts: qcom: add slate VA interface
ARM: dts: msm: Add GPU support for monaco IoT
ARM: dts: qcom: add audio dts source file for Monaco
ARM: dts: msm: Add MSM PCIe bus driver device nodes for direwolf
ARM: dts: qcom: update sdhc properties
ARM: dts: msm: Disable modem region reserved on sa8155
ARM: dts: msm: Add WDT node for SA2150P
dt-bindings: Add snapshot of CX Ipeak cooling device devicetree binding
ARM: dts: msm: Remove qcom,gpu-qdss-stm property for Shima GPU
ARM: dts: msm: Add ion secure heap and secure buffer for quin-vm
ARM: dts: msm: sensors glink channels
ARM: dts: msm: Update ddr stats to support mbox for yupik
ARM: dts: msm: Update ddr_stats to support mbox for lahaina
dt-bindings: arm: ddr_stats: Add QMP mailbox as optional property
ARM: dts: msm: change min voltage of touch_avdd fixed regulator
dt-bindings: qpnp-smblite: Update smblite charger compatible string
ARM: dts: msm: Add video dtsi in monaco target dtsi
ARM: dts: msm: Add bus topology in Monaco Venus PIL
ARM: dts: msm: Interconnect bus handling in video
ARM: dts: msm: Add monaco video dtsi in target dtsi
ARM: dts: msm: Correct syntax error and reorder dts variants for monaco
ARM: dts: msm: add lxc overlay supoort on v1 board
ARM: dts: msm: Add jtag_mm nodes for monaco
ARM: dts: msm: updated monaco qupv3 dtsi
ARM: dts: msm: Update base address for monaco
dt-bindings: thermal: Add support for ibat CCM hardware to bcl driver
ARM: dts: msm: Add thermal zones for pm5100 temp alarm
ARM: dts: msm: Do not timeout waiting for M0
dt-bindings: Add DT bindings for monaco
ARM: dts: msm: Enable audio only for 1GB variants
ARM: dts: msm: Add mproc related node support for qcs405
dt-bindings: clock: Add support for QCS404 clock controllers
ARM: dts: msm: Add ADC support for PM5100
ARM: dts: msm: Add Mproc driver support for direwolf
ARM: dts: msm: Add alloc-ranges in mem_dump_region node
ARM: dts: qcom: keep all step wise rules before userspace rules for YUPIK
ARM: dts: msm: Add support for BT in blair platform
ARM: dts: qcom: enable tsens and thermal zone mitigations for monaco
ARM: dts: qcom: Add flash pinctrl gpio for holi Pro
ARM: dts: msm: Enable icnss node for blair
ARM: dts: msm: Add eMMC platform support for Monaco variants
ARM: dts: msm: Add regulator and supplies for holi-pm6125
ARM: dts: msm: Update bluetooth regulator for holi-pm6125
ARM: dts: msm: Add initial board files for QRD Holi-pm6125
ARM: dts: msm: Add stubs pm8010 and Speaker boost regulators
ARM: dts: msm: Add VOLUME UP Key configuration for Monaco
ARM: dts: msm: Add QBG battery profile for Alium 3600 mAh battery
ARM: dts: msm: Add icnss driver for monaco
bindings: clock: Add support for DIREWOLF Display clock controllers
ARM: dts: msm: Include PM5100 PMIC for Monaco
ARM: dts: msm: Enable usb host for scuba
ARM: dts: msm: Add USB nodes for Scuba
ARM: dts: msm: add stub interconnect devices for Scuba
ARM: dts: msm: Update SMMU Interconnect for scuba iot
ARM: dts: msm: Update kgsl smmu clock for scuba
ARM: dts: msm: Add eMMC, SD card support for SCUBA
ARM: dts: msm: Add dt nodes for spi, i2c, uart for scuba
ARM: dts: msm: enable bluetooth for direwolf vm
ARM: dts: msm: Add initial device tree for SA2150P
ARM: dts: qcom: Fix three issues in WLAN converged node
ARM: dts: msm: Update clock handles for PCIE nodes
ARM: dts: msm: Add USB dtsi nodes for monaco
ARM: dts: msm: Include display nodes for yupik idp with PM7250B
ARM: dts: msm: Add clock controller nodes for SCUBA
ARM: dts: qcom: add audio device tree source files
ARM: dts: msm: Add Superspeed PHY node on blair
ARM: dts: msm: Add UFS support for blair platforms
ARM: dts: msm: adjust S4C voltage
ARM: dts: msm: Add dtsi security nodes for direwolf gvm
ARM: dts: msm: Adding missing dump entries in blair
bindings: clock: Add support for SCUBA clock controllers
dt-bindings: interconnect: add interconnect bindings
ARM: dts: msm: Fix compilation warnings for sa8155, sa8195 and sa6155
ARM: dts: msm: Add USB regulators for holi-pm6125
ARM: dts: msm: Update GPU revision for Yupik
ARM: dts: qcom: Remove PMIC dt inclusion
ARM: dts: msm: replace usb regulator values for BLAIR ATP platform
ARM: dts: msm: Add support for yupik IDP with PM7250B
ARM: dts: msm: Add device tree support for PM7250B
ARM: dts: msm: Update thermal zone entries for holi-pm6125
ARM: dts: msm: Add initial PMIC and regulator support for blair
ARM: dts: msm: Add high speed PHY node on blair
ARM: dts: msm: Add UFS regulators for holi-pm6125
ARM: dts: msm: Add primary and secondary USB nodes on Direwolf
ARM: dts: msm: Add support for QUPv3 dtsi
ARM: dts: msm: Update the QMP UNIPHY init sequence for SM8150
ARM: dts: msm: add MHI register space info for PCIe on SA6155
ARM: dts: msm: add MHI register space info for PCIe on SA8195
ARM: dts: msm: add MHI register space info for PCIe on SM8150
ARM: dts: qcom: update mapping table for dcvvs nodes in blair target
ARM: dts: msm: add wdi scaling exceptions
ARM: dts: msm: Add GPU properties for Blair
ARM: dts: msm: Move icnss driver to soc node
ARM: dts: msm: Add modem mmw_skin mitigation config for HOLI
ARM: dts: msm: Update silver core mitigation for YUPIK
ARM: dts: msm: Add mproc node for slate
ARM: dts: msm: Add correct LDO reference for NFC LDO voting
ARM: dts: msm: Add initial platform device tree for blair QRD
ARM: dts: msm: Enable Secure buffer for monaco
ARM: dts: msm: Include camera sensor dtsi for holi pro
ARM: dts: msm: Add UFS support for direwolf
ARM: dts: msm: Add entry to configure modem tput ep
ARM: dts: msm: include touch nodes for rm69299 panel on Holi target
ARM: dts: msm: include display nodes for pm6125 platform of Holi target
ARM: dts: msm: Add icnss regulator for holi-pm6125
ARM: dts: msm: include camera devicetree for sa6155
ARM: dts: msm: Signal aop change for PIL for BLAIR
ARM: dts: msm: include coresight device tree file for monaco
dt-bindings: pinctrl: qcom-pmic-gpio: add PM5100 bindings
ARM: dts: msm: Disable two_pass_use_wfi quirk for yupik GPU
dt-bindings: regulator: add cpr, mem-acc, spm regulator bindings
dt-bindings: interconnect: add interconnect bindings for QCS405
ARM: dts: msm: Add eMMC/SD card regulators for holi-pm6125
ARM: dts: msm: Add regulator and PMIC support for holi-pm6125
ARM: dts: msm: Add the APPS SMMU device for direwolf
ARM: dts: qcom: Upadate base dts file for Monaco
ARM: dts: msm: Add coresight device tree for monaco
dt-bindings: usb: Document usage of new ANoc and SysNoc clocks
ARM: dts: qcom: Add spi node for slatecom
ARM: dts: msm: disable mss cti
ARM: dts: msm: Add gpu-model property for shima gpu
ARM: dts: msm: Enable Qseecom node for monaco
ARM: dts: msm: Enable qsee drivers for monaco
ARM: dts: msm: add more dts properties for 2nd ufs
ARM: dts: msm: Add GPIO support for the PCIe RCs on the Direwolf platform
ARM: dts: msm: Add PCIe clocks and regulators for the Direwolf VM
ARM: dts: msm: Rename regulators file for holi and blair
ARM: dts: msm: Remove RPMh macros from monaco-regulators
ARM: dts: msm: Remove stub regulators from monaco rumi
ARM: dts: msm: Add dcc registers lists for yupik
ARM: dts: msm: add cnss node for sa6155p-vm
ARM: dts: msm: Change renamed partition names for Direwolf guest
ARM: dts: msm: Add initial platform device tree for blair
ARM: dts: msm: Add vk-device-id property
ARM: dts: msm: Add wakeup interrupt controller for Monaco
ARM: dts: msm: Add system_pm_rpm node for Monaco
ARM: dts: msm: Add LPM device nodes and stats for Monaco
ARM: dts: msm: Add device tree variants for Monaco
ARM: dts: msm: Update PHY sequence for sdxlemur
ARM: dts: msm: Update GPU revision for Shima
ARM: dts: qcom: Add HS-I2S device tree support on SA6155
dt-bindings: thermal: Snapshot of lmh cpu VDD driver document from msm-4.19
ARM: dts: qcom: Add qcom in SiRF GNSS driver
ARM: dts: msm: Add rmtfs_sharedmem support for monaco
ARM: dts: msm: bindings: include camera devicetree for sa6155
dt-bindings: add bindings for gnss_sirf
ARM: dts: msm: Enable cnss on 6155 guest
ARM: dts: msm: Add ACD control register values for Yupik GPU
ARM: dts: msm: Update CNSS node for BT GPIO config
ARM: dts: msm: update ab/ib votes for IPA on Olympic
ARM: dts: msm: Add thermal configuration for sdxlemur
dt-bindings: qcom: Add boolean flag to enable concurrency mode
ARM: dts: qcom: Add HS-I2S device tree support on SA8195
ARM: dts: msm: Add video dtsi in scuba target dtsi
ARM: dts: msm: Add bus topology in Scuba Venus PIL
ARM: dts: msm: Add scuba video dtsi in target dtsi
bindings: Use list of PCIe RC ports for WLAN device
ARM: dts: msm: Add GPUCC clock node and GDSCs for MONACO
ARM: dts: msm: Update clock frequenices for PCIe 2nd instance
ARM: dts: msm: Enable LLCC support in IOSS for sdxlemur
ARM: dts: qcom: Add wlan node for sa6155
dt-bindings: iio: qcom,spmi-vadc: Add PMIC5 GEN3 ADC bindings
Revert "ARM: dts: msm: Disable NPU DCVS support on SM8150"
Revert "ARM: dts: msm: Disable NPU DCVS support on SA8195"
ARM: dts: msm: Enlarge the minidump cma area
ARM: dts: msm: Add ION support for Direwolf
ARM: dts: msm: Add LLCC device nodes for Direwolf
ARM: dts: msm: Add LLCC PMU device nodes on Direwolf
ARM: dts: msm: Add devfreq support nodes for Direwolf
ARM: dts: msm: Add support for clock controllers for BLAIR
bindings: clock: Add debugcc bindings for BLAIR
ARM: dts: msm: Update CPUFREQ-HW nodes for Blair
ARM: dts: msm: Change the shmbridge default size to 1M
ARM: dts: msm: setting clk is provided by SOC
dt-bindings: batterydata: Add bindings for properties used by QBG
bindings: spmi: spmi-pmic-arb: Add description for "qcom,mid"
dt-bindings: thermal: Add new QMI sensors to the supported list
ARM: dts: msm: Enable CPU cooling device for sdxlemur
ARM: dts: msm: Add extcon node for sdxlemur-atp
ARM: dts: msm: Add PM7250B to sdxlemur-atp
ARM: dts: msm: Include sdxlemur-mtp dt in sdxlemur-atp
ARM: dts: msm: bypass IPA eth shared-cb
ARM: dts: msm: update interconnect devices for Monaco
ARM: dts: qcom: add audio device tree source files
ARM: dts: msm: Enable L3 interconnect driver for direwolf
ARM: dts: msm: Add ADC thermistors for sdxnightjar
ARM: dts: msm: add interconnect devices for direwolf
ARM: dts: msm: Add wakeup support for SDIO
ARM: dts: msm: Fix DDR OPP table entries
ARM: dts: msm: Indentation issue for qcom,scm on direwolf vm
ARM: dts: msm: Add initial device tree for SCUBA
ARM: dts: msm: Enable Virtual SSR for the Direwolf VM
ARM: dts: msm: add SPMI PMIC arbiter and PMIC devices for direwolf
dt-bindings: interconnect: add interconnect bindings for direwolf l3
ARM: dts: msm: include sdmshrike-vm-lv-display.dtsi
ARM: dts: msm: add bt power node for sa6155
ARM: dts: msm: Set R8125B Rx ring size on sdxlemur
ARM: dts: msm: Reduce USB IOVA address size by size of LLCC TCM memory
ARM: dts: msm: Add entry to t_power_on scale and value on sdxlemur
ARM: dts: msm: Remove SDPM and policy-engine support for YUPIK
ARM: dts: msm: Correcting watchdog node in blair-rumi.dtsi
dt-bindings: Add DT bindings for scuba
ARM: dts: msm: delete rename-blk on sa8195 LXC VM
ARM: dts: msm: Update Ibat threshold and BCL thermal config for YUPIK
ARM: dts: msm: Add skin, modem and junction thermal config for YUPIK
ARM: dts: msm: Enable QCPE on direwolf vm
ARM: dts: msm: Use svs bus voting with USB on sdxlemur
ARM: dts: msm: Remove duplicate dt node for qupv3 from sm8150
ARM: dts: msm: Fix compilation warnings for auto GVM device tree
ARM: dts: msm: Add device tree for sdxlemur ATP variant
bindings: power: supply: Add documentation for QTI Battery Gauge
dt-bindings: Add devicetree bindings to devicetree project
ARM: dts: msm: enable SiRF GNSS Driver and hsuart1
Revert "ARM: dts: msm: Add LA specific TVM flag in respective SPI node"
ARM: dts: msm: Add DISPCC/DEBUGCC clock node for MONACO
ARM: dts: msm: Add MX property for PCIe on sdxlemur
ARM: dts: msm: Update load factor for PCIe rail on sdxlemur
ARM: dts: msm: Disable icnss node for blair
ARM: dts: msm: mv quat/quin slpi pinctrl to SLPI devicetree file
ARM: dts: msm: Add device tree for sdxlemur eMMC 512 MB variant
ARM: dts: msm: Add gpu-model property for yupik gpu
ARM: dts: msm: Adding updated PHY tune parameters for Yupik
ARM: dts: msm: Add USB nodes for Blair
ARM: dts: msm: Add support for GPU models properties
ARM: dts: msm: Add shared memory driver support
ARM: dts: msm: add MX entries for PCIe EP on sdxlemur
ARM: dts: msm: Add QUPv3 functionality for the Direwolf VMs
ARM: dts: msm: Add aopcc for direwolf
ARM: dts: msm: Add cpufreq HW device node for direwolf
ARM: dts: msm: Add gcc, rpmhcc and gdsc nodes for direwolf
bindings: update documentation for custom-bridge-size
ARM: dts: qcom: Remove unused mem reservation for wlan
ARM: dts: qcom: Update fan cooling thermal config for HHG
ARM: dts: msm: Remove CNSS WLAN CMA region for sdxlemur-512M variants
ARM: dts: msm: Add SDPM domain indexes for YUPIK
bindings: cpufreq-hw: Add support for SDPM CX/MX offset
dt-bindings: leds-qpnp-flash-v2: Add support to control ramp time
ARM: dts: qcom: Add qti-can device tree node
bindings: Add device-tree bindings for slate_events_bridge driver
ARM: dts: msm: disable rpm etm
ARM: dts: msm: change the data delay to 1 for direwolf GVM audio
ARM: dts: msm: update gold L3 memlat mapping for yupik target
ARM: dts: msm: Add spmi device tree node for sa8195
ARM: dts: msm: bypass S1 dma mappings in Linux guest
ARM: dts: msm: add USB0 for SA8195 LXC VM
ARM: dts: msm: Add qcom_gadget node for sdxlemur
ARM: dts: msm: Adding new DT entries for ETH bridging
ARM: dts: msm: Add VBUS supply for USB2 port for Yupik IOT IDP
ARM: dts: msm: Update the venus and vcodec gdsc for monaco
ARM: dts: msm: STMMAC changes for SA6155
ARM: dts: msm: Add switch control GPIO for WLAN
ARM: dts: msm: Add SPI to support PCIe SNPS IRQ 1-7 for sdxlemur
ARM: dts: msm: Add support for USB on Direwolf GVM
ARM: dts: msm: Enable USB2 functionality for yupik IOT IDP
Revert "ARM: dts: msm: Use PCIe_MSI for Shima"
ARM: dts: qcom: Enable CPU frequency cooling device for YUPIK
dt-bindings: Add opp table for ahb device
ARM: dts: msm: Add the rpmcc support for monaco
ARM: dts: msm: Enable hgsl support on direwolf
ARM: dts: qcom: Add modem TSENS thermal zone mitigations for HOLI
ARM: dts: qcom: Add HS-I2S device tree support on SA8155
ARM: dts: msm: Add direwolf QUPv3 spi, i2c and console nodes
ARM: dts: msm: include direwolf-vm-lv-display.dtsi
ARM: dts: msm: Support new TDM interfaces for Automotive
ARM: dts: msm: fix rtc entries
ARM: dts: msm: enable disable-alarm-wakeup for rtc
dt-bindings: qpnp-lcdb-regulator: Add support for some LCDB DT properties
ARM: dts: msm: Add eMMC card support for monaco
ARM: dts: msm: Add shared memory driver support
ARM: dts: msm: Add dtsi changes for PCIe1 enablement for yupik
ARM: dts: msm: Reduce cma region
ARM: dts: msm: SA8155 EAVB fix
ARM: dts: msm: SA6155 EAVB fix
ARM: dts: msm: Enable GPIO function of GPIO171
ARM: dts: msm: STMMAC changes for SA8195
ARM: dts: msm: remove wlan section of mem_dump
ARM: dts: msm: remove mem_dump region
ARM: dts: msm: Add common CMA region for sdxnightjar
ARM: dts: msm: Add base device tree for direwolf LA guest
ARM: dts: msm: Add multi queue support
ARM: dts: msm: Add cpufreq-hw clock node for MONACO
ARM: dts: msm: multi-card for Gen3 platform lxc dtbo
ARM: dts: msm: add audio gvm dts for auto direwolf platform
ARM: dts: msm: Add DT entry for wrapper pm support
ARM: dts: msm: set dma mapping mode to atomic
ARM: dts: msm: Add MDM flag for Audio memory regions
ARM: dts: msm: STMMAC changes for SA8155
ARM: dts: msm: Add support for USB secondary clocks for YUPIK IOT
ARM: dts: msm: Add hwrng nodes for sa8155 and sa8195 VM
ARM: dts: msm: Enable L1SS sleep for p-v2.1
ARM: dts: msm: Update PCIe0 PHY settings to v1.00 for p v2.1
ARM: dts: msm: Correct the soc dts info for HHG HSP Pro platform
ARM: dts: msm: add 2nd UFS for Quin SA8195 LXC VM
ARM: dts: msm: enable dual wlan for Quin SA8195 VM LXC
ARM: dts: msm: Move display include to end of quin-vm-common
ARM: dts: msm: Disable IPA for yupik iot qcs variants
ARM: dts: msm: Add initial device tree for direwolf virtual machine
ARM: dts: msm: correct modem etm path
ARM: dts: msm: enable mem_dump for Linux guest
ARM: dts: msm: Add child node entry for CPE NTN3 i2c client on sdxlemur
ARM: dts: msm: Add child node entry for MBB NTN3 i2c client on sdxlemur
ARM: dts: msm: update quat tdm multilane config on auto VMs
ARM: dts: msm: Add bindings for llcc tcm
ARM: dts: qcom: Add modem TSENS thermal zone mitigations for SHIMA
ARM: dts: msm: Add support for GCC for BLAIR
ARM: dts: msm: Disable NPU DCVS support on SA8195
ARM: dts: msm: Removed pil-scm-pas for sdxnightjar
ARM: dts: msm: Modify BDF to SID mapping for MBB on sdxlemur
ARM: dts: msm: Have PCIe RC control NTN3 and its ETH power for sdxlemur
ARM: dts: msm: Filter NTN3 downstream BDF for sdxlemur
dt-bindings: arm: msm: Add child node entry for NTN3 i2c client
dt-bindings: arm: msm: add support for BDF filtering
dt-bindings: clock: Add support for BLAIR clock controllers
ARM: dts: qcom: remove audio heap allocation for sdxnightjar
ARM: dts: msm: Add cpuidle states and LPM stats devices for direwolf
ARM: dts: msm: update QUPs for sa8195 virtual machine
Revert "ARM: dts: qcom: Enable the second UFS instance"
ARM: dts: msm: Add Bluetooth device tree for SA6155VM
ARM: dts: msm: Fix GPIO pin name
ARM: dts: msm: Avoid xbl_aop_mem overlay with aop_cmd_db
ARM: dts: msm: add gpio cells property for auto sa*155 platform
ARM: dts: msm: Add fixed regulators for select sdxlemur boards
bindings: clock: Add support for direwolf clock controllers
ARM: dts: msm: reduce the fastmap memory
ARM: dts: msm: Add spmi device tree node for sa6155p
ARM: dts: msm: Reduce reserved size of modem for sdxnightjar
ARM: dts: msm: Enable uefi_log memory for SA8155
ARM: dts: msm: Enable rename_blk device for LXC guest
ARM: dts: msm: Avoid xbl_aop_mem overlay with aop_cmd_db
ARM: dts: qcom: add audio device tree source files
ARM: dts: msm: Add capacity and DPC properties for Blair
bindings: mproc: Add support for glink-slatecom strings
ARM: dts: msm: Update skin and modem junction thermal config for YUPIK
ARM: dts: msm: Correct interrupt specification for RTC
ARM: dts: qcom: add pinctrl for audio internal mclk2 on sa6155 platform
ARM: dts: msm: Correct wlan_vregs config name
ARM: dts: msm: update smmu ipa iova on sa8155 vm
ARM: dts: msm: enable smmu s1 for wlan on sa8155 vm
ARM: dts: msm: configure iommu for pci wlan
ARM: dts: qcom: Adjust configs in wlan node for SA8155 VM
ARM: dts: msm: Add sdhc_2 for SA6155P Quin virtual machine
ARM: dts: msm: Add interconnect data for USB on sdxnightjar
ARM: dts: qcom: Move cnss_wlan_mem to sdxlemur-cnss.dtsi
ARM: dts: msm: Add multiport USB support for SA8195 autogvm
ARM: dts: msm: Change drive strength for swr tx to 2MA for yupik
ARM: dts: msm: Add pm8xxx rtc device for monaco
dt-bindings: rtc: rtc-pm8xxx: Add binding documentation for pm5100 rtc
ARM: dts: msm: Add qmp aop voting support for direwolf
ARM: dts: msm: Disable NPU DCVS support on SM8150
ARM: dts: msm: Add trusted touch entries on yupik qrd
ARM: dts: msm: Add focaltech spi touch node in yupik qrd svm
ARM: dts: msm: Fix IPA doorbell address for sdxlemur
dt-bindings: interconnect: add interconnect bindings for direwolf
ARM: dts: msm: Update USB IOVA start address on sdxlemur
ARM: dts: msm: Add LA specific TVM flag in respective SPI node
ARM: dts: msm: Update 0.9 vreg property for PCIe on sdxnightjar
ARM: dts: msm: Add iio support for pmi632
ARM: dts: msm: Add RPMh controlled PMIC regulators for direwolf
ARM: dts: msm: Remove disable shmbridge property sa8195 GVM
ARM: dts: msm: Add bindings for cpufreq
ARM: dts: msm: Fix phandle lookup failures for apsscc on sdxlemur
ARM: dts: msm: Add spmi device tree node
ARM: dts: msm: Update correct masters for sdxnightjar
ARM: dts: qcom: Enable the second UFS instance
ARM: dts: msm: Remove PCIE clock from YUPIK IOT QRD
ARM: dts: msm: Fix compilation errors for monaco
ARM: dts: msm: Enable uefi_log memory for SA6155
ARM: dts: msm: Add 128k and 265k pools for Lahaina
ARM: dts: msm: Enable pil and dload support for Monaco
dt-bindings: backlight: Add support to configure slew ramp time
dt-bindings: backlight: Add support for exponential dimming
ARM: dts: msm: Enable rpm standalone mode for blair
ARM: dts: msm: Add mpm as gpio wakeup parent for sdxnightjar
ARM: dts: msm: Enable uefi_log memory for sdmshrike
ARM: dts: msm: Add set_ddr_capped_freq device node interface for SA8195
ARM: dts: qcom: Update CPU and GPU mitigation rules on Lahaina HHG
dt-bindings: spi-msm-geni: Add flag for SPI responder MISO-MOSI connection
ARM: dts: msm: Add PDC interrupt controller device for direwolf
ARM: dts: msm: Add RSC devices for direwolf
ARM: dts: msm: Add SPS node for sdmshrike
ARM: dts: qcom: Enable thermal zones and cooling devices for sa6155
ARM: dts: qcom: update pmic alarm thermal zone mitigation for sa8155/sa8195
ARM: dts: qcom: Enable thermal zones and cooling devices for sa8195
ARM: dts: msm: Add IPA dtsi configuration for SA8195
dt-bindings: arm: msm: devicetree documentation for PCIe EDMA
ARM: dts: msm: Update SPMI PMIC ARB IRQ for sdxnightjar
ARM: dts: msm: Add new dts files for 512MB support for sdxnightjar
ARM: dts: msm: disable super speed phy of USB1 on Lahaina HHG
ARM: dts: msm: Enable two_pass_use_wfi quirk for yupik GPU
ARM: dts: msm: Update WLED support for yupik
ARM: dts: msm: Adding device tree node for Blair pinctrl
dt-bindings: Adding pinctrl devicetree binding for Blair
ARM: dts: msm: Add initial device tree for Blair
ARM: dts: msm: Enable CVP SMMU fault tolerance and Stall disable
ARM: dts: msm: Add support for mpm interrupts on sdxnightjar
ARM: dts: msm: Add the LPM and mpm node
ARM: dts: msm: Add set_ddr_capped_freq device node interface for SA6155
ARM: dts: msm: Add rpm-smd node for Monaco
bindings: arm: msm: Added documentation for ipc spinlock
dt-bindings: Update soc sleep stats to read legacy device data
ARM: dts: msm: Add memshare for yupik
ARM: dts: msm: Increase voltage for S11B and S1C
ARM: dts: qcom: remove audio drivers not used for sdxnightjar
ARM: dts: msm: Add wlan device tree for SA8155 VM
ARM: dts: qcom: Add qti-can device tree node for sa8155
ARM: dts: qcom: Add virtual ptp for sa8155 vm
ARM: dts: msm: spcom: add vreg_sp and gpio_sp
ARM: dts: msm: Add CX and MX SDPM configuration for YUPIK
ARM: dts: qcom: Enable thermal zones and cooling devices for sa8155
ARM: dts: msm: Add bluetooth power node for sa8155 virtual machine
ARM: dts: msm: Enable IOMMU Geometry for WLAN
ARM: dts: msm: Superset common regulators votes change for Lahaina
ARM: dts: msm: Qseecom_ta_region removed from CMA
ARM: dts: msm: Increase the S11B/S2E max voltage for Lahaina
ARM: dts: msm: Add Bluetooth power node for SA8195 VM
ARM: dts: msm: Add wlan device tree for SA8195 VM
dt-bindings: ptp: Add virtual ptp memory entry
ARM: dts: msm: add wlan converged node for SA81x5
bindings: can: Add device-tree bindings for qti-can driver
ARM: dts: msm:Reduce CMA region size
ARM: dts: msm: Remove pwr_evt_irq for SA6155 and SA8155 USB3 cores
ARM: dts: msm: STMMAC crash fix
ARM: dts: msm: Add set_ddr_capped_freq device node interface for SA8155
ARM: dts: msm: Adding support to send messages to AOP using QMP transport
bindings: arm: msm: Add documentation for spm-v2
ARM: dts: msm: Add Wakeup interrupt controller for sdxnightjar
ARM: dts: msm: Enable PCIe0 nodes only for iot variant
ARM: dts: msm: Add pil scm pass node
ARM: dts: msm: Specify the irq type and trigger level
ARM: dts: msm: Add IPA device configuration for SA8155
ARM: dts: msm: Add version 1 of the memory map for sdxlemur CPE
ARM: dts: msm: update PCIe LTR value to 150us for sdxlemur
ARM: dts: msm: Add aux clock property for PCIe EP on sdxlemur
ARM: dts: msm: Add SPS node for sm8150
ARM: dts: msm: Add SPS node for sa6155
ARM: dts: msm: Add multiport USB support for SA8195
ARM: dts: msm: Disable SSPHY autosuspend for Gen3 Auto platforms
ARM: dts: msm: Correct the audio ion node heap type
ARM: dts: msm: Add IPCC node for Direwolf
ARM: dts: msm: Workaround till all IPA changes are merged
ARM: dts: msm: Add qos-cores for fastrpc
ARM: dts: msm: Add missing CPUSS dump nodes to SDMSHRIKE
ARM: dts: msm: Add the iommu property for SSC QUP
ARM: dts: msm: Fix cache dump sizes for SM8150
ARM: dts: msm: Add veth ipa documentation for device node
ARM: dts: msm: Add interconnect aggregation noc
ARM: dts: msm: Add pshold dt node for Direwolf
ARM: dts: msm: Add WDT node for Direwolf
ARM: dts: msm: Add device-tree entry for IMEM for Direwolf SoC
ARM: dts: msm: Add pinctrl node for TLMM on Direwolf SoC
ARM: dts: msm: Populate reserved memory regions for Direwolf
ARM: dts: msm: Add initial device tree for Direwolf
ARM: dts: msm: Enable HMP for SA8195 and SA8155 VM
ARM: dts: msm: Reduce the CMA region sizes for sdxlemur
ARM: dts: msm: Add camera device tree inclusions for lahaina hhg
ARM: dts: qcom: enable modem mitigations for bcl thermal zones for yupik
ARM: dts: qcom: keep all step wise rules before userspace rules for lahaina
ARM: dts: msm: Add hgsl support in 6155
ARM: dts: msm: Add UFS ICE HW Node for SA8195 and SM8150
dt-bindings: arm: msm: Add UFS ICE HW Node for SA8195 and SM8150
ARM: dts: msm: Add power reset and watchdog nodes for sa8155 quin vm
ARM: dts: msm: Add the iommu property on SA8155
ARM: dts: qcom: vm: Add device nodes for second AFE rx and proxy tx devices
ARM: dts: msm: add fixed-regulator to supply USB2 VBUS on Lahaina HHG
ARM: dts: msm: Add cnss devicetree node for Yupik IoT
ARM: dts: msm: Increase max voltage range for S1B
ARM: dts: msm: Remove interconnect aggregation noc binding
ARM: dts: msm: Add support for YUPIK LTE platform
ARM: dts: msm: Change board-id for sa8195 lxc gvm
ARM: dts: msm: Enable rename_blk device for Linux guest
ARM: dts: msm: Add qfprom for sa6155
ARM: dts: msm: include quin-vm-display.dtsi
ARM: dts: msm: Add support to disable PDC wakeup for gpios for lahaina
ARM: dts: msm: Add RPM SMD controlled PMIC regulators for Monaco
ARM: dts: msm: correct dcc offset on sdxlemur
ARM: dts: msm: update charger ADC channels for yupik IDP
dt-bindings: Add device-tree bindings for virtual minidump driver
ARM: dts: msm: Add changes for PCIe0 RC enablement for yupik
ARM: dts: msm: Add support for new subtype id for yupik-iot
ARM: dts: msm: disable tpdm sdcc on sdxlemur
ARM: dts: msm: include audio dt files for sa6155 auto platforms
ARM: dts: msm: Use separate property for multiple WLAN support
ARM: dts: msm: include audio dt files for sa8195-vm auto platforms
ARM: dts: msm: include audio dt files for sa8155-vm auto platforms
ARM: dts: msm: include audio dt files for sa6155p-vm auto platforms
ARM: dts: qcom: update scaling ratios for SMB_ICHG and SMB_IIN channels
ARM: dts: msm: Disable uC hold monitor
ARM: dts: msm: add se10 spi alias for sa6155 auto platform
dt-bindings: msm: Add compatbile strings for direwolf
ARM: dts: msm: Enable SMMU S1 support for eMMC on Yupik
ARM: dts: msm: Add l3 endpoints and pwrlevels for yupik gpu
ARM: dts: msm: Enable subsystem sleep stats driver for holi
bindings: arm: msm: Add documentation for subsystem sleep_stats_driver
dt-bindings: leds: qcom-clk: Add qcom,default-clk-trigger property
ARM: dts: msm: include sa6155 display devicetree
ARM: dts: msm: Removing appsbl-qseecom-support
ARM: dts: msm: enable scmi plh protocol
ARM: dts: msm: Add DPC property for SM6150
ARM: dts: msm: Add DPC property for SA8195
ARM: dts: msm: Add DPC property for SM8150
ARM: dts: msm: add bt power node for sa81x5
ARM: dts: msm: STMMAC changes for SA6155
ARM: dts: msm: STMMAC changes for SA8155 LV
ARM: dts: msm: STMMAC changes for SA8195
ARM: dts: msm: Add secure buffer device for sdxnightjar
ARM: dts: msm: Enable rpmh_master_stats to read master stats for holi
dt-bindings: msm: rpmh-master-stats: Update reg as optional property
ARM: dts: msm: set qupv3 se15 i2c rate to 100khz
ARM: dts: msm: Enable the PCIE GDSC for YUPIK IOT
ARM: dts: msm: Add IPA device configuration for SA8195
ARM: dts: msm: Add base DT for smb1390 nodes
ARM: dts: msm: use se22 spi alias instead of se2
ARM: dts: msm: Base device tree of SA6155 GVM
ARM: dts: msm: STMMAC Add doc for EMAC node
ARM: dts: msm: STMMAC binding
ARM: dts: msm: Add virtual spmi device tree node for sa8155
ARM: dts: msm: Add NPU-DDR devfreq nodes to SA8195
ARM: dts: msm: Add NPU-DDR devfreq nodes to SA8155
ARM: dts: qcom: Enable TSENS and thermal zone changes for sdxnightjar
ARM: dts: msm: Add IOSS config for Realtek R8125
ARM: dts: msm: Add NPU device tree for sa8155/sa8195
ARM: dts: msm: Add qcom,no-accumulative-counter property for cpufreq
ARM: dts: msm: Add qseecom node for sa8195 GVM
ARM: dts: msm: Enlarge the minidump cma area for SM8150
ARM: dts: msm: Add DT snapshots for pmi632 and pm6125
ARM: dts: msm: Enable qcom,power-always-on for GPU SMMUs on GKI targets
ARM: dts: msm: Remove PCIE clocks from protected list for YUPIK IOT
ARM: dts: qcom: thermal zones definition for thermistors on Lahaina HHG
ARM: dts: msm: add pci DT nodes for PCIe switch for sdxlemur CPE
ARM: dts: msm: expand iommu-map to support PCIe switch on sdxlemur CPE
ARM: dts: msm: Modify irq type for qcedev,qcrypto
ARM: dts: msm: Make sdhc aliases start from 0
ARM: dts: msm: Add clock for SLPI pinctrl for SM8150
ARM: dts: msm: add PCIe AUX clk freq for sa6155, sa8155, sa8195
ARM: dts: msm: Add mpm2 sleep counter for sm8150
ARM: dts: msm: Add PCIE clocks to protected list for YUPIK
ARM: dts: msm: Add firmware support for SA8195
ARM: dts: msm: Add firmware support for SM8150
ARM: dts: msm: Add device nodes for FastRPC and CDSP Loader for SM6150
ARM: dts: msm: Add device nodes for FastRPC and CDSP Loader for SA8195
ARM: dts: msm: Add ADSP remoteheap vmlist for SA8155
ARM: dts: msm: Enable qseecom on sdxnightjar
ARM: dts: msm: Add scm node for msmsteppe
ARM: dts: msm: Enable touch support on lahaina MTP 2.1
ARM: dts: msm: add panel in ECM device for yupik QRD platform
ARM: dts: msm: Add firmware support for SA6150
ARM: dts: msm: Disable SDCC TPDMs on yupik
ARM: dts: qcom: disable thermal zone gpu-skin-avg-step on Lahaina HHG
ARM: dts: msm: Update S1B and S8B min voltages on yupik
ARM: dts: msm: Add AQC IPA offload configs
ARM: dts: msm: Add virtual subsystem notification nodes for SA8155 VM
ARM: dts: msm: Add qcom,usb-charger dt prop on sdxlemur
ARM: dts: msm: Enable IOSS v2 for sdxlemur
ARM: dts: msm: Update USB properties for SA8155 GVM
ARM: dts: msm: Update irq type for rtc and usb-id irq
ARM: dts: msm: updated memory map v5 for holi
ARM: dts: msm: Add proxy vote on display regulators on yupik
ARM: dts: msm: Add ION support for SM6150
ARM: dts: msm: Update MCLK rate
ARM: dts: msm: Add initial device tree for yupik-iot
ARM: dts: msm: Add IOSS v2 driver bindings
ARM: dts: msm: Add support for kgsl driver on SA6155
dt-bindings: arm: msm: add mhi registers entry for PCIe RC
dt-bindings: arm: msm: remove deprecated io and bar entries for PCIe
ARM: dts: msm: add MHI register space info for PCIe on sdxlemur
ARM: dts: msm: Add RDPM register map for yupik GPU
ARM: dts: msm: Add Pmesg Reserved Memory for Yupik
ARM: dts: msm: Add qseecom node for sa8155 gvm
ARM: dts: msm: Correct parent regulator for sdxlemur VDD_CX_LEVEL_AO
ARM: dts: msm: Add DMIC0 support
ARM: dts: msm: Add dt node for msm-poweroff on SM6150
ARM: dts: msm: Add secure_buffer and qcom,scm device on SM6150
ARM: dts: msm: Add mem-dump and CPU dump nodes to SM6150
ARM: dts: msm: Add core-hang detect nodes to SM6150
ARM: dts: msm: Add device node for llcc node on SM6150
ARM: dts: msm: Add PMU device nodes to SM6150
ARM: dts: msm: Add DCVS device nodes to SM6150
ARM: dts: msm: Add device node for watchdog in SM6150
ARM: dts: qcom: Add device nodes for second AFE rx and proxy tx devices
ARM: dts: msm: include audio dt files for sax155 auto platforms
ARM: dts: msm: enable IPA-AQC\RTL CB sharing
ARM: dts: msm: Add pcie node for Realtek r8125 driver
ARM: dts: msm: Remove the handles for PCIE clocks for Yupik
ARM: dts: msm: Add vidc node for SA6155
ARM: dts: msm: Update NSP and skin sensor thermal config for YUPIK
ARM: dts: qcom: Update UBWC version to 3 for yupik gpu
ARM: dts: msm: Enable qseecom on sdxlemur
ARM: dts: msm: Enable qrng on sdxlemur
ARM: dts: msm: Update noc reg sizes for sdmshrike
ARM: dts: msm: Add AQC to ipa_eth_group1
ARM: dts: msm: Add device tree node for GP2 clock driven led
dt-bindings: add documentation for leds-qcom-clk
ARM: dts: msm: Add ipa_eth_group1
ARM: dts: msm: Add Buses,PCIe,USB and storage devices to SM6150
ARM: dts: msm: Enable multiple WLAN drivers support for Lahaina
ARM: dts: msm: expand iommu-map to support PCIe switch on sdxlemur
ARM: dts: msm: Add audio nodes for sdxnightjar
ARM: dts: msm: Add cdsp rpmsg entry in yupik
ARM: dts: msm: Add dtsi entry for ssg hlos drivers
ARM: dts: msm: Add dtsi entry for spss_utils, spcom drivers
ARM: dts: msm: Add dtsi entry for spss_utils, spcom drivers
ARM: dts: msm: Early mount of vendor partition
ARM: dts: msm: Fix IPA doorbell address for sdxlemur
ARM: dts: msm: Add new soc-id for sdxlemur
ARM: dts: msm: Enable smcinvoke and shmbridge on yupik
ARM: dts: msm: Add slpi pinctrl to SM6150
ARM: dts: msm: Enhanced flow control support to sdxlemur target
ARM: dts: msm: Correct syntax error
ARM: dts: msm: Add PMUV3 node for monaco
ARM: dts: msm: add touch support for more panels on qrd yupik
ARM: dts: msm: include audio dt files for sa8195
bindings: update documentation for support-legacy_smc
ARM: dts: msm: Remove "msr-fix-req" label from some TPDMs
ARM: dts: msm: Add PM8008 GPIO and regulators to scuba-iot
ARM: dts: msm: Add Additional speed bins for supported devices
ARM: dts: msm: Enable smcinvoke and shmbridge
ARM: dts: msm: add hgsl to sa8195 vm for GPU doorbell
ARM: dts: msm: Reorganize the apps_rsc and mxlvl node for sa8195
ARM: dts: msm: Add configuration for vref regulator vote for YUPIK
ARM: dts: msm: Add devicetree support for HSP (WCN6850)
ARM: dts: msm: Enable device nodes for PIL on SM6150
ARM: dts: msm: Add venus device node for PIL on SM6150
ARM: dts: msm: Add turing device node for PIL on SM6150
ARM: dts: msm: Add lpass device node for PIL on SM6150
ARM: dts: msm: Add SMMU devices for SM6150
ARM: dts: msm: Add dtsi entry for ssg hlos drivers
ARM: dts: msm: Add flag to disable the DMA mode
ARM: dts: qcom: update usb2 phy setting on YUPIK QRD
ARM: dts: msm: Add dtsi entry for ssg hlos drivers
ARM: dts: msm: clean up display references for sa8155/sa8195
dt-bindings: arm: msm: Add entry to disable masking MSI interrupts at EP
ARM: dts: msm: disable masking MSI interrupts at EP side
ARM: dts: msm: Update dtsi entries for fastrpc context banks
ARM: dts: msm: update wsa node for yupik qrd audio
ARM: dts: msm: add se22 spi alias
ARM: dts: msm: Add GPII base and GPII IRQ for VM static configs
ARM: dts: msm: Add pin control for HSP (WCN6850)
ARM: dts: msm: add audio dt files for sax155 auto platforms
ARM: dts: msm: Enable touch for 120Hz panel on yupik idp
ARM: dts: qcom: change ldo for fan controller on Lahaina HHG
ARM: dts: qcom: enable display on trusted vm for yupik
ARM: dts: msm: add PMIC devices for SA6150
ARM: dts: msm: Add UFS support for SA6155
ARM: dts: msm: Enable L3 interconnect driver for SM6150
ARM: dts: msm: add interconnect devices for sm6150
ARM: dts: msm: add pci DT nodes for PCIe switch for sdxlemur
ARM: dts: msm: Modify IPA DT entry for sdxnightjar
ARM: dts: msm: bypass new cb for pcie ep
ARM: dts: msm: Correct the width of APSS TPDM
ARM: dts: msm: Add 120fps display and touch support Yupik Amoled IDPS
ARM: dts: msm: add support for CPUCP l3 scaling on yupik target
ARM: dts: msm: Update EQU_ADAPTOR_CNTRL3 of SS PHY on holi
ARM: dts: msm: Add device nodes for FastRPC and CDSP Loader for SA8155
ARM: dts: msm: add quat/quin slpi pinctrl info on sm615x platform
ARM: dts: msm: Add reserved memory for dfps data on yupik
ARM: dts: msm: Add node for memory dump driver for SDMSHRIKE
ARM: dts: msm: Add node for memory dump driver for SM8150
ARM: dts: msm: Add irq type for uart, watchdog and pinctrl for sdxnightjar
ARM: dts: msm: correct name of etm0
ARM: dts: msm: add lxc overlay devicetree for Gen3 platform
ARM: dts: msm: include display device tree for sa8155/sa8195
ARM: dts: msm: Add support for secure-level-shifter on sdxnightjar
ARM: dts: msm: include camera devicetree for sm8150
ARM: dts: msm: Enable charge pump on sdxlemur platforms
ARM: dts: msm: Add novatek touch node in yupik trusted VM
dt-bindings: Add novatek touch vendor name
ARM: dts: msm: Add trusted touch properties for yupik
ARM: dts: msm: Add fps entry for yupik
ARM: dts: msm: Add display and touch support for Yupik Amoled IDP
ARM: dts: msm: Add support for general interrupts on sdxnightjar
Revert "ARM: dts: msm: Update kgsl smmu clock for scuba"
bindings: Documentation: Add new SDK audio properties
ARM: dts: msm: Disable USB U1/U2 on Olympic
ARM: dts: msm: Update qpic nand bus vote to nominal voltage
ARM: dts: msm: Add L1 TLB node for holi
ARM: dts: msm: Update regulators LDO1C and LDO10C for yupik
ARM: dts: msm: Add AOPCC for SM6150
ARM: dts: msm: Disable haptics for yupik atp
ARM: dts: msm: Add mpm wakeup control capability in yupik pinctrl
ARM: dts: msm: Add device trees for IDPS with AMOLED for Yupik and YupikP
ARM: dts: msm: Update the Uni Phy sequence for Olympic
ARM: dts: msm: update dtsi for wlan pipes holb timeout
ARM: dts: msm: Correct ATID for tpda dlct
ARM: dts: msm: enable guest disks renaming
ARM: dts: msm: Change the node location for optimization for Yupik
ARM: dts: msm: Add apb_pclk to GMU clock list for Shima
ARM: dts: msm: Add clocks needed for qos configuration
ARM: dts: msm: correct the size of etf_reg dump
dt-bindings: enable guest disks renaming
ARM: dts: msm: Mark PMIC QUPs as critical clock devices for YUPIK
dt-bindings: clock: Add qcom,critical-* properties
ARM: dts: msm: Add glink support for SA6155
ARM: dts: msm: Update BCL thermalzone configuration for SHIMA
ARM: dts: msm: Disable DB polling feature for yupik
dt-bindings: max31760: Add description for the fan cooling device
ARM: dts: msm: Enable SMMU S1 for WLAN
ARM: dts: msm: Add camera mux gpio support
ARM: dts: msm: Add ddr qos devfreq device to yupik gpu
ARM: dts: msm: Add tzone-names for yupik GPU
ARM: dts: msm: Add GCC clock node and GDSCs for MONACO
ARM: dts: msm: Add cpufreq HW device node SM6150
ARM: dts: msm: Add clock controllers and gdsc nodes for SM6150
Revert "ARM: dts: msm: Limit max-frequency for eMMC and SD card"
ARM: dts: msm: Vote vccq2 via vccq to support GKI
ARM: dts: msm: Enable pil nodes for scuba
ARM: dts: msm: Removed wdog for sdxnightjar pil modem
ARM: dts: msm: Add dma-coherent for tmc-etr on yupik
ARM: dts: msm: Enable display port for yupik
ARM: dts: msm: Change wsa spkr node for yupik wsa
ARM: dts: msm: Add icnss driver for scuba
ARM: dts: msm: Add support for Lahaina HHG HSP Pro
ARM: dts: msm: Enable io-coherence hw support for yupik
ARM: dts: msm: add yupik VM ion chages
ARM: dts: msm: Disable PMX65 VBUS_DET on sdxlemur MTP-MBB and RCM-RC boards
ARM: dts: msm: include camera devicetree for sa8195
ARM: dts: msm: Add vidc node for SA8195
ARM: dts: msm: Add vidc node for SM8150
ARM: dts: msm: Add handles for PCIE clocks for Yupik
ARM: dts: msm: Add support for sec mi2s for fm
ARM: dts: msm: Add core-hang detect nodes to SDMSHRIKE
ARM: dts: msm: Add core-hang detect nodes to SM8150
ARM: dts: msm: Update QSEECOM CMA region
ARM: dts: msm: Add dt node for restart driver on SDMSHRIKE
ARM: dts: msm: Add DT node for msm-watchdog in SDMSHRIKE
ARM: dts: msm: Add dt node for restart driver on SM8150
ARM: dts: msm: Add DT node for msm-watchdog in SM8150
dt-bindings: batterydata: Add jeita-fcc-scaling related properties
Revert "ARM: dts: msm: Disable pmic thermal zone cofiguration"
ARM: dts: msm: Add open loop CPR support
dt-bindings: qpnp-smb5: Property to enable JEITA-ARB configuration
bindings: clock: Add support for MONACO clock controllers
ARM: dts: msm: set pm8350b_l1 init voltage for qrd yupik
ARM: dts: msm: Add PMIC and USB support for sdxlemur NTN3 board
ARM: dts: msm: Add SMB1394 device tree node
dt-bindings: Add support for GDSC flag to map single GDSCR
bindings: smb1398: Add support for SMB1394
ARM: dts: qcom: enable suspend for Lahaina HHG
ARM: dts: msm: Add regulator and thermal node
ARM: dts: msm: add cnss device tree
ARM: dts: msm: Update compatible string for moselle
ARM: dts: qcom: Add GPU gaming bin support for Yupik
ARM: dts: msm: Add regulators for SA6155
dt-bindings: qpnp-lcdb-regulator: Add support for NCP symmetry with LDO
ARM: dts: msm: remove kgsl smmu interconnect node for Shima
ARM: dts: msm: disable bias for GPIO81 on Lahaina/Shima QRD
ARM: dts: msm: add hgsl to sa8155 vm for GPU doorbell
ARM: dts: msm: Add qfprom for sa8195
ARM: dts: msm: Add qfprom for sa8155
ARM: dts: msm: remove PON_PBS peripheral for yupik
ARM: dts: msm: Add PMU device nodes for SDMSHRIKE
ARM: dts: msm: Add devfreq device nodes for SDMSHRIKE
ARM: dts: msm: Add PMU device nodes for SM8150
ARM: dts: msm: Add device trees for sa8195 virtual machine
ARM: dts: msm: Update max voltage for each regulator
ARM: dts: msm: add cont splash memory for yupik target
ARM: dts: msm: Add support for kgsl driver on sdmshrike
ARM: dts: msm: Add support for kgsl driver on SA8155
ARM: dts: msm: Enable smmu s1 on sdxlemur V2
ARM: dts: msm: Disable pmic thermal zone cofiguration
ARM: dts: msm: add pm-qos-latency for Lahaina usb
ARM: dts: msm: Add yupik camera sensor device tree to Yupik QRD
ARM: dts: msm: add CMA heap allocation
ARM: dts: msm: update cpu core frequency corners in mapping table
ARM: dts: msm: Add SPS node for Yupik
ARM: dts: msm: Add alias for serial device to ensure proper enumeration
ARM: dts: msm: Enable wcn bt for yupik
ARM: dts: qcom: add sde-rsc-rpmh driver to disp_rsc node
ARM: dts: msm: Enable L3 interconnect driver for Yupik
ARM: dts: msm: Update GPU FMAX for yupik GPU
dt-bindings: interconnect: add interconnect bindings for sm6150
ARM: dts: msm: Add hab and peripherals for sa8155 vm
ARM: dts: msm: update widget name for Lahaina HHG device
ARM: dts: msm: Add devfreq device nodes for SM8150
ARM: dts: msm: Add Display and Touch support on yupik atp
ARM: dts: qcom: Add SPI touch node for QRD yupik
ARM: dts: msm: Add vreg.sp and gpio.sp resources for lahaina
ARM: dts: msm: include display qrd nodes for yupik qrd
ARM: dts: msm: Add i2c, spi, uart dtsi nodes for monaco
ARM: dts: msm: Enable PCIe RC on sdxnightjar
ARM: dts: msm: Add necessary changes for CQE enablement on sdxlemur
ARM: dts: msm: Enable dlct tpdm on yupik
ARM: dts: msm: Add thermal zone entries for pm8195
ARM: dts: msm: Add bus voting support for sdxlemur
ARM: dts: msm: Enable forcce-hard-reset option for sdxnightjar
ARM: dts: msm: Change some coresight component names
ARM: dts: msm: Disable SDCC TPDMs on shima
ARM: dts: msm: Mark GCC USB30 secondary clocks as protected on YUPIK
ARM: dts: msm: Limit max-frequency for eMMC and SD card
ARM: dts: msm: Add pmic dependency back on Yupik
ARM: dts: msm: Add yupik camera sensor device tree to Yupik IDP
ARM: dts: msm: Add cpuidle states and stats driver nodes for sm6150
ARM: dts: msm: Add cmd_db, RSC and PDC devices for sm6150
ARM: dts: msm: Early mount of vendor partition
ARM: dts: msm: Enable smmu for eMMC on shima
ARM: dts: msm: Update GPU speed bins for yupik
ARM: dts: msm: Add ion device for sdxnightjar
ARM: dts: msm: Map more no of redistributors for monaco
ARM: dts: msm: Add support for qca6490 xo clk gpio
ARM: dts: msm: Add entry to handle XO clock gpio
ARM: dts: msm: Change QSEE,glink IRQs to level trigger
ARM: dts: msm: Add device node for llcc node on SDMSHRIKE
ARM: dts: msm: Add device node for llcc on sm8150
ARM: dts: msm: disable tpdm sdcc on holi
ARM: dts: msm: Add support for Moselle (WCN6750)
dt-bindings: ufs: Add compitable string for V3 UFS PHY on SM6150
bindings: clock: Add support for SM6150 clock controllers
ARM: dts: msm: Rectify DT flags and GPII mask for TUI VM usecase
ARM: dts: msm: Correct bluetooth node name for sdxnightjar
ARM: dts: msm: Add cooling-cells property in mdss_mdp device for yupik
ARM: dts: msm: Enable device nodes for PIL on SDMSHRIKE
ARM: dts: msm: Add spss device node for PIL on SDMSHRIKE
ARM: dts: msm: Add venus device node for PIL on SDMSHRIKE
ARM: dts: msm: Add npu device node for PIL on SDMSHRIKE
ARM: dts: msm: Add turing device node for PIL on SDMSHRIKE
ARM: dts: msm: Add lpass device node for PIL on SDMSHRIKE
ARM: dts: msm: Add scm & scm-pas device on SDMSHRIKE
ARM: dts: msm: Fix wdog interrupts on pil subsystems for SM8150
ARM: dts: msm: Enable device nodes for PIL on SM8150
ARM: dts: msm: Add venus device node for PIL on SM8150
ARM: dts: msm: Add turing device node for PIL on SM8150
ARM: dts: msm: Add npu device node for PIL on SM8150
ARM: dts: msm: Add spss device node for PIL SM8150
ARM: dts: qcom: Update Audio dtsi entries
ARM: dts: msm: Add a new pinctrl state for lahaina
ARM: dts: msm: Include display nodes for yupik target
ARM: dts: msm: add touch support on yupik target
ARM: dts: msm: Enable dcc for yupik
ARM: dts: msm: Add support for FM in yupik platform
ARM: dts: qcom: enable fan controller for Lahaina HHG
ARM: dts: msm: enable more SIDs
ARM: dts: msm: update interconnect and global interuupts on yupik
ARM: dts: msm: Update extcon for USB on sdxnightjar
ARM: dts: msm: Add support for sysdev on sdxnightjar
ARM: dts: msm: Correct dtsi file for Lahaina HHG non-overlay dts
dt-bindings: Document usage of qcom,ignore-wakeup-src-in-hostmode
ARM: dts: msm: Add a new pinctrl state for yupik
ARM: dts: msm: add mem_dump entry for sdxnightjar
ARM: dts: msm: Add LCDB and WLED devices for PM7325B
dt-bindings: qpnp-lcdb-regulator: Add support for PM7325B LCDB
ARM: dts: msm: Add devfreq-cpufreq for SDXNIGHTJAR target
ARM: dts: msm: Add BCL and PMIC die temperature mitigation for yupik
ARM: dts: msm: Add GPU thermal zone configuration for YUPIK
ARM: dts: msm: Add QMI sensor and cdev configuration for YUPIK
ARM: dts: msm: Add CPU thermal configuration for yupik
ARM: dts: msm: Add UFS ICE HW controlled clock for yupik
ARM: dts: msm: Update kgsl smmu clock for scuba
ARM: dts: msm: Add support for diff yupik sku
ARM: dts: msm: Modify IPA DT entry for sdxnightjar target
ARM: dts: msm: Update max bus vote range for Holi
ARM: dts: msm: Add lpass device node for PIL on SM8150
ARM: dts: msm: Add platform dt changes for yupik for ufs
ARM: dts: msm: Add GPU properties for yupik GPU
ARM: dts: msm: Add cpufreq-hw-debug node for Lahaina
dt-bindings: backlight: Add support for PM7325B WLED
ARM: dts: msm: Correct soc id for monaco
ARM: dts: msm: Update DISPCC and debugcc clock nodes for YUPIK
ARM: dts: msm: Remove pmic dependency on Yupik
bindings: Add device-tree bindings for slatecom interface driver
ARM: dts: msm: Add smp2p sleepstate node for yupik
ARM: dts: qcom: Enable haptics node for yupik atp
ARM: dts: msm: Add audio overlay for yupik
ARM: dts: msm: Add pin configuration for USB3 PHY portselect on Yupik
ARM: dts: msm: Add iommu and h/w reset support for yupik
ARM: dts: msm: update apps smmu interrupt list
ARM: dts: msm: Mark GCC PCIE clocks as protected in YUPIK
bindings: Add device-tree bindings for slatecom SPI driver
ARM: dts: msm: Adding CoreTech sa8195 DT Changes to Mainline 5.4
ARM: dts: msm: Add scm dt nodes for sdxnightjar
ARM: dts: msm: Add I2C NFC device node and LDO voting for yupik
ARM: dts: msm: Adding IPA nodes for yupik target
ARM: dts: msm: Added pil nodes for sdxnightjar
ARM: dts: qcom: swap WSA enable pin
ARM: dts: msm: Add SMP2P entry and enable SIDs for WLAN
bindings: Add device-tree bindings for pil-q6v5 driver
ARM: dts: msm: add remote debugger support
ARM: dts: msm: Add SDIO support for sdxnightjar
ARM: dts: msm: Add feature config node for qfprom for Yupik
ARM: dts: msm: Update GIC interrupt polarity for Yupik
ARM: dts: msm: add dcvs nodes for yupik target
dt-bindings: add documentation for max31760 fancontroller
ARM: dts: msm: add bindings for HGSL driver
ARM: dts: msm: Add device node for PIL scm pas on SM8150
ARM: dts: msm: Add camera device pinctrl change for Yupik camera
ARM: dts: msm: Add slpi device node for PIL on SM8150
ARM: dts: msm: Add modem device node for PIL SM8150
ARM: dts: msm: Add device node for IMEM on SM8150
dt-bindings: ufs: Add compatible string for yupik phy driver
ARM: dts: qcom: Add dtsi entry for BT slimbus in yupik
ARM: dts: msm: Enable SMB1351 for sdxnightjar
ARM: dts: msm: Enable bluetooth for sdxnightjar
ARM: dts: msm: correct refgen type for holi
ARM: dts: msm: Add cpu clock node for sdxnightjar
ARM: dts: msm: Correct QUPv3 device nodes
ARM: dts: msm: remove kgsl smmu interconnect node for Lahaina
ARM: dts: msm: enable HOLB monitor feature
ARM: dts: msm: Add support for ddr scaling on sdxlemur
ARM: dts: msm: Add device node for ARM PMU for Olympic
ARM: dts: msm: Add bindings for ARM performance measuring unit
dt-bindings: Add dt binding for NT36xxx driver
ARM: dts: msm: Add fastrpc and cdsp/adsp device node
ARM: dts: msm: Introduce demura HFC region nodes
ARM: dts: msm: Add pinctrl information for Yupik target
ARM: dts: msm: Add thermal zones for pm2250
ARM: dts: msm: Change DT configuration for PMIC GPIO device
ARM: dts: msm: Change address-cells to 1 for pm2250
ARM: dts: msm: Add tlmm pinctrl support for SM6150
ARM: dts: msm: Add minidump id for LPASS/CDSP on Yupik
ARM: dts: msm: Enable qsee drivers for yupik
ARM: dts: msm: Add device tree files for sdxlemur v2
ARM: dts: msm: Revised RCM RC variant id for sdxlemur
ARM: dts: msm: Add IPA DT entry for sdxnightjar target
ARM: dts: msm: Add Modem pil node for Yupik
ARM: dts: msm: Signal aop change for PIL for YUPIK
ARM: dts: msm: Add qfprom and qfprom_sys node
ARM: dts: msm: Add bus voting and platform support for yupik
ARM: dts: qcom: Add node to enable haptics on yupik qrd
ARM: dts: msm: Add ion support for SDMSHRIKE
ARM: dts: msm: add stub interconnect devices for Monaco
ARM: dts: msm: Add slpi pinctrl to SDMSHRIKE
ARM: dts: msm: Remove duplicated smem_mem on SDXNIGHTJAR
ARM: dts: msm: Add support for CPUFREQ HW for YUPIK
ARM: dts: msm: Add TSENS node support for yupik
ARM: dts: msm: Add pm-qos-latency for Yupik
ARM: dts: msm: Add SMMU nodes for Yupik
ARM: dts: msm: Add USB Phy Support on Yupik
ARM: dts: msm: Disable haptics for yupik idp
ARM: dts: msm: Add idle states for sdmshrike
ARM: dts: msm: Add a new pinctrl state for holi
ARM: dts: msm: Update the APSSCC clock node for SDXLEMUR
ARM: dts: msm: add node in device tree for yupik QRD
ARM: dts: msm: add setting for Lahaina HHG audio
ARM: dts: msm: Add GDSC for HS USB PHY for SDXNIGHTJAR
ARM: dts: msm: Add new DT file for Dual WIFI support for sdxnightjar
dt-bindings: spi-msm-geni: Define fixed timeout property
dt-bindings: add bindings for HAB driver
ARM: dts: msm: Update regulators for yupik
ARM: dts: msm: Add platform-specific PMIC changes for yupik
ARM: dts: msm: Add initial device tree for Lahaina HHG
ARM: dts: msm: Add ddr qos devfreq device to lahaina gpu
ARM: dts: msm: Add l3 endpoints and pwrlevels for gpu
ARM: dts: msm: device nodes for SVM usecases on yupik
bindings: clock: Add CPU clock controller bindings for SDXNIGHTJAR
ARM: dts: msm: Update CMA region for monaco
ARM: dts: msm: Add mem_dump node for yupik
ARM: dts: msm: Rectify all BLSP QUP nodes with correct clocks
ARM: dts: msm: Update ion heap for scuba
ARM: dts: msm: Add SMMU devices for sdmshrike
ARM: dts: msm: define mem offline node in yupik
ARM: dts: qcom: add refgen regulator device for yupik
ARM: dts: msm: Add coreisght device tree for yupik
ARM: dts: msm: Update memory map for SDXNIGHTJAR target
ARM: dts: msm: Add dcc node for yupik
dt-bindings: interconnect: add interconnect bindings
ARM: dts: msm: Add camera device tree inclusions for Yupik camera
ARM: dts: msm: Add dtsi nodes for i2c, spi and hsuart
ARM: dts: msm: add UCSI connector and USB port on Yupik
ARM: dts: msm: Add USB BAM device node on sdx12
ARM: dts: qcom: Add second trip to quiet-therm-usr for holi
ARM: dts: msm: Update labels for sdxnightjar regulators
ARM: dts: msm: Add TUI support over SPI and I2C on LE VM for Yupik
ARM: dts: msm: add PMIC devices for SCSHRIKE
ARM: dts: msm: Add UFS support for SDMSHRIKE
ARM: dts: msm: Add device trees for YupikP variant
ARM: dts: msm: add interconnect devices for sdxnightjar
ARM: dts: msm: Add QDSS devictree for sdxnightjar
ARM: dts: msm: correct modem etm0 connecton on sdxlemur
ARM: dts: msm: Adding all CoreTech DT Changes to Mainline 5.4
ARM: dts: msm: Remove sdxlemur dt from pcie-ep dtsi
Revert "ARM: dts: msm: add initial support for hw memlat devices"
ARM: dts: msm: Add EUD node for Yupik
ARM: dts: msm: Add MPROC device nodes for monaco
ARM: dts: msm: add DCC register list for sdxlemur
ARM: dts: msm: fix USB2 issue on holi QRD DVT
ARM: dts: msm: Disable USB SMMU S1 on sdxlemur pcie ep platform
ARM: dts: msm: Enable L3 interconnect driver for scshrike
ARM: dts: msm: Add cpufreq HW device node SDMSHRIKE
ARM: dts: msm: Add all clock controller and gdsc nodes for scshrike
ARM: dts: msm: Add support for glink for SDMSHRIKE
ARM: dts: msm: add interconnect devices for scshrike
dt-bindings: Update for CNSS driver to support WCN7850 device
ARM: dts: msm: add conn_therm and charger_skin_therm for sdxlemur platforms
ARM: dts: msm: Split tz mem region for sdxlemur
ARM: dts: msm: Update power source for PM8350C GPIOs for yupik
ARM: dts: msm: Add apb_pclk to GMU clock list for Lahaina
dt-bindings: interconnect: add interconnect bindings for SDXNIGHTJAR
ARM: dts: msm: Add ACD control register values for Shima GPU
ARM: dts: msm: Add wdi2 support for holi
ARM: dts: msm: add actlr settings for yupik
ARM: dts: msm: Update clocks and clock-names of GCC node for YUPIK
ARM: dts: msm: Add video device for Yupik
ARM: dts: msm: add the current load parameter for vdd reg
ARM: dts: msm: Update CAMCC clock node for YUPIK
ARM: dts: msm: add PMIC devices for SM8150
ARM: dts: msm: Add system_pm device for SDMSHRIKE
ARM: dts: msm: Add Power management nodes for SDMSHRIKE
ARM: dts: msm: Add regulators for SDMSHRIKE
ARM: dts: msm: Add RSC and cmd_db support for SDMSHRIKE
dt-bindings: clocks: Add clock controller bindings for SCSHRIKE
dt-bindings: interconnect: add interconnect bindings
ARM: dts: msm: Add the SMMU devices for SM8150
arm64: dts: qcom: sm8150: Add cpufreq HW device node
ARM: dts: qcom: Add slimbus dtsi node for monaco
ARM: dts: msm: Update interrupt configuration for sdxnightjar
ARM: dts: msm: Add initial device tree for Quin virtual machine
ARM: dts: msm: Update VideoCC node and Multimedia GDSC's for YUPIK
ARM: dts: qcom: Add second trip to quiet-therm userspace rule for SHIMA
ARM: dts: msm: Revised emmc device tree and added to makefile
ARM: dts: msm: Add venus pil node for Yupik
ARM: dts: msm: Update drive strength values for sdc1 node on shima
ARM: dts: msm: Add audio dtsi changes for yupik
ARM: dts: msm: Enable download/restart mode drivers for Yupik
ARM: dts: msm: Enable USB bus suspend functionality on sdxlemur
ARM: dts: msm: Update ddr variant for all sdxlemur 512mb variants
ARM: dts: msm: Add SPS node for monaco
ARM: dts: qcom: Add second trip to xo-therm userspace rule for lahaina
ARM: dts: msm: Enable qcedev and qcrypto on olympic
dt-bindings: interconnect: update OSM L3 bindings
Revert "ARM: dts: msm: add initial support for hw memlat devices"
bindings: interconnect: Update OSM L3
ARM: dts: msm: Remove test devices for sdxlemur v1
ARM: dts: msm: Add initial device tree for SA6155
ARM: dts: msm: Add bcm voter devices for Yupik
ARM: dts: msm: Add dma-coherent for tmc-etr on Lahaina
ARM: dts: msm: Update the init-mode of LDO11C for shima
ARM: dts: msm: Add QDSS IPA bam connection config for sdxlemur
ARM: dts: msm: Add Superspeed PHY node on sdxnightjar
ARM: dts: msm: Add USB nodes for SDXNIGHTJAR
ARM: dts: qcom: enable hypervisor core_ctl for Yupik
ARM: dts: msm: Add support for SM8325 platforms
ARM: dts: msm: Add SPS node for SDXNIGHTJAR
ARM: dts: msm: Add clock controller nodes for SDXNIGHTJAR
ARM: dts: msm: Add Yupik trustedVM device configuration
ARM: dts: msm: Add PIL node for WPSS in Yupik DTSI
ARM: dts: msm: Add reserved region for uefi for holi
ARM: dts: qcom: update redriver of shima/lahaina QRD
ARM: dts: msm: Update ddr subtype for 512mb variant
ARM: dts: qcom: Add entries for audio overlay
ARM: dts: msm: Fix pmx65 die_temp configuration
ARM: dts: msm: Enable tzlog driver on sdxlemur
ARM: dts: msm: Increase max voltage of S11B regulator
ARM: dts: msm: Add label for llcc
ARM: dts: msm: Add initial device tree for Yupik for QRD
ARM: dts: qcom: Add dtsi node entry for Slimbus in yupik
bindings: clock: Add clock controller bindings for SDXNIGHTJAR
ARM: dts: msm: Enable NAND and SD card for sdxnightjar
ARM: dts: msm: Add a 5C hysteresis for DDR rule in Lahaina
bindings: mproc: add smdpkt.txt
ARM: dts: msm: Configure I2C pinctrl setting as per codec requirement
ARM: dts: msm: Add secondary controller USB nodes for Yupik
ARM: dts: msm: Add rmtfs_sharedmem support for yupik
ARM: dts: msm: Added warm reset for sdxlemur pcie devices
ARM: dts: msm: Update spmi_bus configuration for sdxnightjar
ARM: dts: msm: add interconnect paths for smmu
ARM: dts: msm: Add PMIC support for monaco
dt-bindings: pinctrl: qcom-pmic-gpio: add PM7325 and PM7325B bindings
ARM: dts: msm: Add PM8008 support for yupik
ARM: dts: msm: Add PMIC support for yupik
ARM: dts: msm: increase vddio voltage for hdk r66451 dsi panel
ARM: dts: msm: Add support for Lahaina HSP Pro
ARM: dts: msm: Add ddr type to the subtype for sdxlemur
ARM: dts: msm: Add extcon node for sdxlemur platforms
ARM: dts: msm: Add L3 snoop bw device on Lahaina
ARM: dts: msm: Add cpu7 qos latfloor device on shima
ARM: dts: msm: Add support for TUI over SPI on LE VM
ARM: dts: msm: Add support of clock AOP for YUPIK
ARM: dts: msm: Update ion heap for monaco
ARM: dts: msm: Update tune params of HS PHY
ARM: dts: msm: Add SMMU device tree for Monaco
ARM: dts: msm: add new properties to guestvm node
dt-bindings: Update bindings for guestvm-loader
ARM: dts: msm: Add clock support for uart driver
ARM: dts: msm: Disable atmel_mxt_ts on shima
ARM: dts: msm: Increase max voltage of S11B regulator to 2.04V
ARM: dts: msm: Enable PCIe EP on sdxlemur MBB
ARM: dts: msm: Add PCIe EP and MHI device for sdxlemur
ARM: dts: msm: Make sdhc aliases start from 0
ARM: dts: msm: remove SMB1398 clock frequency setting on holi
ARM: dts: msm: update PMU cache and log buffer addresses for holi target
ARM: dts: msm: add no-memory-wc to sram node for holi
ARM: dts: msm: Add eMMC, SD card support for yupik
ARM: dts: msm: Add initial device tree for Yupik for IDP/ATP
ARM: dts: msm: Add ICNSS2 DT node for Yupik
ARM: dts: msm: Add camera device tree inclusions for lahaina hdk
ARM: dts: msm: Bind emmc and sdcard slot to 0 & 1
ARM: dts: msm: Bind sdcard to slot 1
ARM: dts: msm: Add support for RPMHCC for YUPIK
ARM: dts: msm: Add dma coherent flag for ufs
ARM: dts: msm: Change micbias no for VA DMIC for shima
ARM: dts: msm: switch off kpti on shima/lahaina/yupik
ARM: dts: qcom: use separate thermal zone names for modem pa for shima
ARM: dts: msm: Add trustedvm enablement nodes for Yupik
ARM: dts: qcom: Add RPMh controlled PMIC regulators for yupik
ARM: dts: msm: Enable KPDPWR software debounce for PMK8350
ARM: dts: msm: update PMU cache and log buffer addresses for holi target
Revert "ARM: dts: msm: Add dma-coherent for tmc-etr on Lahaina"
dt-bindings: qpnp-amoled: add support to disable pulse skipping
ARM: dts: msm: Make sdhc aliases start from 0
ARM: dts: qcom: update skin sensor modem mitigation threshold for shima
ARM: dts: msm: Enable mproc drivers for SDXNIGHTJAR
Revert "ARM: dts: msm: Disable PMX65 VBUS_DET on sdxlemur MTP-MBB and RCM-RC boards"
ARM: dts: msm: add no-memory-wc to sram node for holi
dt-bindings: input: qpnp-power-on: Update "reg" property description
ARM: dts: msm: Update interconnect nodes for YUPIK
dt-bindings: interconnect: update interconnect bindings
ARM: dts: msm: Update BCL, Alarm and CPU thermal mitigation for SHIMA
ARM: dts: msm: Update thermal mitigation config for SHIMA
ARM: dts: msm: Add jtagv8 devices for yupik
ARM: dts: msm: remove SMB1398 clock frequency setting on holi
ARM: dts: msm: Remove bluetooth bootstrap pin EDL_MODE settings
ARM: dts: msm: update generic PCI node name on sdxlemur
ARM: dts: msm: Add USB PHY related PDC interrupts and enable on sdxlemur
ARM: dts: qcom: Change cci3 gpio function from cci to gpio
ARM: dts: qcom: Update skin and cx thermal config for HOLI
ARM: dts: msm: Update the rpm-smd node with IRQ for sdxnightjar
ARM: dts: msm: Add a new pinctrl state for shima
ARM: dts: msm: modify dcc_ram_offset for sdxlemur
ARM: dts: msm: refine QDSS config for sdxlemur
ARM: dts: msm: Add interconnect osm l3 devices for SM8150
ARM: dts: msm: Add UFS support for SA8155
ARM: dts: msm: add interconnect devices for sm8150
ARM: dts: msm: Add clock controller and gdsc nodes for sm8150
ARM: dts: msm: Add dma-coherent for tmc-etr on Lahaina
ARM: dts: msm: Add boot_stats node for Yupik
ARM: dts: msm: add msm_rtb tracing
ARM: dts: msm: Enable NAND and SD card for sdxlemur target
ARM: dts: msm: Enable bluetooth for sdxlemur
ARM: dts: msm: Add label for bluetooth bootstrap pin EDL_MODE on sdxlemur
ARM: dts: msm: DDR cooling device no mitigation for lahaina
dt-bindings: arm: msm: add entry for number of PARF testbus selectors
ARM: dts: msm: add number of PARF testbus selectors for shima
ARM: dts: msm: add number of PARF testbus selectors for sdxlemur
ARM: dts: msm: add number of PARF testbus selectors for lahaina
ARM: dts: msm: Support CNSS WLAN device for sdxlemur
ARM: dts: msm: Add new GPU DCVS corners for Shima
ARM: dts: msm: Add dummy clock nodes for MONACO
ARM: dts: msm: Disable scaling for SD and eMMC on sdxlemur
ARM: dts: msm: Update GPUCC clock node and GDSC for YUPIK
ARM: dts: msm: Update GCC clock node and GDSC for YUPIK
ARM: dts: msm: Add missing memory map region for sdxlemur
ARM: dts: msm: Disable PMX65 VBUS_DET on sdxlemur MTP-MBB and RCM-RC boards
ARM: dts: msm: Reduce secure heap to 30MB
ARM: dts: qcom: add ADC channels for pm8350b and smb139x on shima
ARM: dts: msm: Add ion heap for monaco
ARM: dts: msm: specify thermal mitigation levels for sdxlemur platforms
ARM: dts: msm: Add initial v1 memory map for Monaco
ARM: dts: msm: add gfx smmu node on yupik
ARM: dts: msm: add spmi_debug_bus for sdxlemur
ARM: dts: msm: update pm7250b devices for sdxlemur platforms
ARM: dts: msm: Enable eMMC for sdxlemur target
ARM: dts: msm: Add CDSP pil node for Yupik
ARM: dts: msm: Add LPASS pil node for Yupik
ARM: dts: msm: Add scm pas node
ARM: dts: msm: Enable SMMU and PSCI for scuba
ARM: dts: msm: Add QUPv3 SE and GPI DT nodes for yupik
ARM: dts: msm: Add PMX65 die temperature channel
ARM: dts: msm: Turn off KPTI for Lahaina
ARM: dts: qcom: Update skin and cx thermal config for HOLI
ARM: dts: msm: Remove display clock as client for CX SDPM for SHIMA
ARM: dts: msm: keep PCIe in EQ Master Phase for at least 1ms on sdxlemur
dt-bindings: arm: msm: add support for tuning PCIe EQ Master Phase
ARM: dts: msm: add MX entries for PCIe on sdxlemur
ARM: dts: msm: Add IOMMU Geometry property for storage
bindings: SMB358: Add documentation for smb358 charger
ARM: dts: msm: Include sdxlemur-mtp dt on all mtp trees
ARM: dts: msm: Add eMMC device tree files for sdxlemur
dt-bindings: clock: Add support for YUPIK clock controllers
ARM: dts: msm: add touch for 144hz panel
ARM: dts: msm: Move firmware node ahead
ARM: dts: msm: Change the node location for optimise
ARM: dts: msm: Add pmd9650 gpio nodes for SDXNIGHTJAR
ARM: dts: qcom: Change cci3 gpio function from cci to gpio
ARM: dts: msm: Update the rpm-smd node with correct IRQ for holi
ARM: dts: qcom: update JEITA FCC threshold for alium 3600mAh battery
ARM: dts: msm: update PCIe1 to support m.2 and generic EP on lahaina HDK
ARM: dts: msm: Enable touch for Dual DSI video mode on shima
ARM: dts: msm: Add initial devicetrees for SDXNIGHTJAR target
ARM: dts: msm: Update PCIe PHY settings to v1.02 for sdxlemur
ARM: dts: msm: add LTR entries for HSP direct connects on sdxlemur
ARM: dts: msm: Add pm-qos-latency for Shima
dt-bindings: arm: Add FUSE and DBGUI support
ARM: dts: msm: add PCI DT node for generic attaches over oculink sdxlemur
ARM: dts: msm: Correct BAM register address on olympic
ARM: dts: msm: increase log buf size for holi
ARM: dts: msm: Add le-vm DT flag in lahaina TUI
ARM: dts: msm: Disable unused flag for MDM
dt-bindings: interconnect: add OSM L3 bindings
dt-bindings: ufs: Add compitable string for V4 UFS PHY on SM8150
dt-bindings: interconnect: update interconnect bindings
ARM: dts: qcom: Add entry for EUD driver
ARM: dts: msm: Include stub regulators for Monaco
ARM: dts: msm: Add the hwkm ice slave regions to storage node
ARM: dts: msm: enable scmi plh protocol
dt-bindings: clocks: Add clock controller bindings for SM8150
ARM: dts: msm: Add support for glink for SM8150
ARM: dts: msm: Add initial device tree for Monaco
ARM: dts: msm: Disable sdcard on cdp & eMMC on mbb platform
ARM: dts: msm: Add PMIC devicetrees for SDXNIGHTJAR
ARM: dts: msm: Add RDPM register map for Shima GPU
ARM: dts: msm: Use PCIe_MSI for Shima
ARM: dts: msm: Change the node location for optimization for Shima
ARM: dts: msm: Add stub regulators for Monaco
ARM: dts: msm: Add v2 MTP VM device tree file for lahaina VM
ARM: dts: msm: Add DCC register list for holi
ARM: dts: msm: Update regulator S3A for holi
ARM: dts: msm: Add vdd parent supply for holi GPU
ARM: dts: msm: Enable SCMI PLH protocol
ARM: dts: msm: correct PCIe regulator labels for sdxlemur
ARM: dts: msm: Reorganize the apps_rsc node for Lahaina
dt-bindings: arm: msm: support tuning of PCIe EQ preset request vector
Revert "ARM: dts: msm: Enable SCMI PLH protocol"
ARM: dts: msm: Add S3 die_temp channel for scuba
bindings: mproc: Add support for sm8150 mailbox string
bindings: qcom-pmic-gpio: Add PMD9650 binding
ARM: dts: msm: Enable qcom,power-always-on for GPU SMMUs on GKI targets
dt-bindings: Document the qcom,power-always-on property for SMMU devices
ARM: dts: qcom: Add entries for power off/downlaod mode driver
ARM: dts: qcom: Add MicroUSB support for Holi
ARM: dts: msm: Add dmips and dynamic power co-efficient for Yupik
ARM: dts: msm: Update the rpm-smd node with correct IRQ for holi
ARM: dts: msm: Add secure display heap configuration for Yupik
ARM: dts: msm: Add DCC register list for holi
ARM: dts: msm: Add DDR cooling device for Lahaina
ARM: dts: msm: Add vmid cdsprpc-smd for Holi
ARM: dts: msm: Add GPU mitigation rules for Lahaina QRD
ARM: dts: msm: adjust pm6150a_l1 initial voltage for Holi platforms
ARM: dts: msm: Add cti trig_out gpio for shima
dt-bindings: Add DDR cooling device
ARM: dts: msm: Correct GCC clocks for UART instances
ARM: dts: msm: Enable touch for Dual DSI panel on shima
ARM: dts: msm: Add cphy video/cmd mode touch support on shima
ARM: dts: msm: Add configuration for vref regulator vote for SHIMA
ARM: dts: msm: Add CX and MX SDPM configuration for SHIMA
ARM: dts: msm: Add rmtfs_sharedmem support for scuba-iot
Revert "ARM: dts: msm: enable mem_offline.bypass_send_msg for holi"
ARM: dts: msm: Disable dma-coherent for IPA CBs on SDXLEMUR
ARM: dts: qcom: Added msm-id entry for single-die sdxlemur
ARM: dts: msm: Keep default PM level setting for Lahaina
ARM: dts: msm: Add missing changes to shima-atp dtsi
ARM: dts: msm: Add acd registers for HOLI
ARM: dts: msm: Add Wakeup interrupt controller for scuba-iot
bindings: qcom-hv-haptics: add properties to support non-HBoost regulator
ARM: dts: qcom: Enable TSENS driver support for sdxlemur
ARM: dts: msm: disable GPU funnel
ARM: dts: msm: Update PCIe LDO clock from CXO to CXO_A
ARM: dts: msm: Update regulator S3A for holi
ARM: dts: msm: add system ion heaps on yupik
ARM: dts: msm: Add bindings for PCIe end point driver
ARM: dts: msm: Add vdd parent supply for holi GPU
Revert "ARM: dts: msm: Add new DT entry for wan agg pkt size"
ARM: dts: msm: Add QUPv3_0 and SE5 dt nodes for YUPIK
ARM: dts: msm: Remove touch vote for L8C on shima
ARM: dts: msm: Add PM7250B to select sdxlemur boards
ARM: dts: msm: Add PMIC overlay to all sdxlemur platforms
ARM: dts: msm: Add change for smmu memory optimizations
dt-bindings: arm: Add reset/flush CTI trigger number support
ARM: dts: msm: add smmu nodes on yupik
ARM: dts: msm: add MX entries to qcom,bw-scale for PCIe on shima
ARM: dts: msm: add MX entries to qcom,bw-scale for PCIe on lahaina
dt-bindings: arm: msm: add MX entries for PCIe
ARM: dts: msm: Configure USB SMMU in atomic mode on sdxlemur
ARM: dts: qcom: add physical addr for swr tx slaves of Holi
ARM: dts: msm: Set emmc vdd-io regulator in NPM mode during sleep
ARM: dts: msm: Add slimbus dtsi node for scuba
ARM: dts: msm: Add cti trigger number to device tree for holi
ARM: dts: msm: Add cti trigger number to device tree for lahaina
ARM: dts: msm: Increase MHI event rings number for SDXLEMUR
ARM: dts: msm: add PCIe AUX CLK freq entry for PCIe0 and PCIe1 for lahaina
ARM: dts: msm: Add eMMC, SD card support for sdxlemur
ARM: dts: msm: Update S2C min voltage for shima
ARM: dts: msm: add l3 latfloor in shima target
ARM: dts: msm: disable IPA TPDM
ARM: dts: msm: Change IPA bandwidth threshold value for holi target
ARM: dts: msm: Enable SCMI PLH protocol
ARM: dts: msm: Add interconnect bus voting values to Holi
ARM: dts: qcom: Add quiet-therm thermal zone mitigation for HOLI
ARM: dts: msm: add trusted touch support in PVM for Lahaina
ARM: dts: msm: Remove modem tsens QMI thermal zone for Lahaina
ARM: dts: msm: Reduce the IOVA range for slimbus and QUP usecases
ARM: dts: msm: Reduce the IOVA range for QUP usecase
ARM: dts: msm: Update masks in codec Fs clock sequence
ARM: dts: msm: Add cti trigger number to device tree for shima
ARM: dts: msm: Add ARM PMU node for Yupik
ARM: dts: msm: Enable Kryo erp driver for Yupik
ARM: dts: msm: Add core hang detection for Yupik
ARM: dts: msm: add PCIe AUX clk freq for controller for sdxlemur
ARM: dts: msm: move qcom,boot-option to HSP dedicated DTSI for sdxlemur
ARM: dts: msm: Add usb bam dt node on sdxlemur
ARM: dts: msm: Add a new power level for supported devices
Revert "ARM: dts: msm: Use PCIe_MSI for Shima"
ARM: dts: msm: Add ipcc test nodes for Yupik
ARM: dts: msm: select visionox panel and touch controller for TVM
ARM: dts: msm: Add LLCC entry for Yupik
ARM: dts: msm: Add MPROC device nodes for scuba
dt-bindings: LLCC: Add compatible property for Yupik
ARM: dts: qcom: Update skin and cx thermal mitigation config for SHIMA
Revert "ARM: dts: msm: disable mem-offline node"
ARM: dts: msm: Add v2.1 MTP VM device tree file for Lahaina VM
ARM: dts: msm: Update silver core mitigation for Lahaina
ARM: dts: msm: Update PSCI state id for yupik
bindings: mproc: Add support for scuba and monaco mailbox strings
ARM: dts: msm: Add bootargs for Yupik
ARM: dts: msm: Add cnss-enable-self-recovery flag for shima
ARM: dts: msm: Update memory-map for sdxlemur
ARM: dts: qcom: add physical addr for swr tx slaves of Shima
ARM: dts: msm: Update PSCI state id for shima
ARM: dts: msm: Update the PSCI mode id for yupik
ARM: dts: qcom: Add quiet-therm thermal zone mitigation for HOLI
ARM: dts: msm: Add AOP QMP nodes for yupik
ARM: dts: msm: Add glink entries for yupik
ARM: dts: msm: Add HWSPINLOCK, SMEM and SMP2P for yupik
dt-bindings: thermal: Add support for QMI beamer ADC and RF sensors
ARM: dts: qcom: Fix watchdog entry for sdxlemur
ARM: dts: msm: Update GPU, core isolation and hotplug threshold for SHIMA
ARM: dts: msm: Enable LCD_REG_EN gpio and LCD_BKLT_PWM on shima
bindings: pinctrl: Add device-tree bindings for SDNIGHTJAR pinctrl driver
ARM: dts: msm: Move firmware node ahead
ARM: dts: msm: Change IPA bandwidth threshold value for holi target
ARM: dts: msm: add USB3_DP_COM_TYPEC_STATUS register
ARM: dts: msm: Add rmtfs_sharedmem support for sdxlemur
ARM: dts: msm: Add panel information to amoled-ecm for Shima platforms
ARM: dts: msm: update PLL_BIAS_CONTROL_2 for holi QRD
ARM: dts: msm: add display message queue to trusted vm for lahaina
ARM: dts: msm: Configure L9B from retention mode to LPM on shima
ARM: dts: msm: Add cnss config for internal power amp for shima
ARM: dts: msm: Update the qmp register macro file name for Lahaina
ARM: dts: msm: Add QMP PHY dt entries on sdxlemur
ARM: dts: msm: Export qfprom cell to userspace for Shima
ARM: dts: msm: Add beamer ADC and RF sensors for HOLI
ARM: dts: msm: Add firmware node for yupik
ARM: dts: msm: Add cdsp rpmsg entry in holi and shima
ARM: dts: msm: Add GPU_CPR register space for Shima
ARM: dts: msm: Add RDPM register map for Lahaina GPU
ARM: dts: msm: Add SD card regulator devices for sdxlemur
ARM: dts: msm: Convert sdxlemur stub regulators to RPMh
ARM: dts: msm: remove low voltage VCC support entry from DT
ARM: dts: msm: Add cqhci_ice and sdcc_ice_slave regions
ARM: dts: msm: Add hw gcc reset for sdcc on holi
ARM: dts: msm: add WL_EN entry in BT node
ARM: dts: msm: Add hw gcc reset support for eMMC on shima
ARM: dts: msm: Change the node location for optimise
ARM: dts: msm: Update UFS VCC regulator min voltage for shima
ARM: dts: msm: Add scuba-iot files on 5.4
ARM: dts: msm: add audio routings sdxlemur
ARM: dts: msm: Export qfprom cell to userspace
dt-bindings: Add qfprom-sys documentation
ARM: dts: msm: Fix command DB address for sdxlemur
ARM: dts: msm: update ddr mapping table for shima target
ARM: dts: msm: Update S3A min and init voltages for holi
ARM: dts: msm: Update CNSS node for BT GPIO config for shima
dt-bindings: media: Add video driver bindings for Yupik
ARM: dts: msm: Add focaltech touch support on holi cdp
ARM: dts: msm: disable mem-offline node
ARM: dts: msm: Add handles for USB3 interface clocks
ARM: dts: msm: Add touch support for holi
ARM: dts: msm: Add lcd display support on holi
ARM: dts: msm: Update S3A min and init voltages for holi
ARM: dts: msm: Add USB nodes for Yupik
ARM: dts: msm: Add idle states and stats devices for yupik
ARM: dts: msm: Add PDC and RSC devices for yupik
ARM: dts: msm: Enable board specific USB detection on sdxlemur
ARM: dts: msm: Add interconnect entries for USB on sdxlemur
ARM: dts: msm: Add tlmm pinctrl support for SA8195
ARM: dts: msm: Add initial device tree for SA8195
ARM: dts: msm: Remove CDP DT for SA8155
bindings: Documentation: add SDK audio properties
ARM: dts: msm: update sound card name for holi usbc variant
ARM: dts: msm: Disable fastmap for IPA CBs on SDXLEMUR
ARM: dts: msm: Remove bi_tcxo_ao clock and vdd_cx_ao handles from GCC
ARM: dts: msm: Add Bus voting support
bindings: leds: vibrator: Move vibrator LDO documentation to correct folder
ARM: dts: msm: Added pil nodes for sdxlemur
ARM: dts: msm: Add ufs dt node for yupik
ARM: dts: msm: Add board device-tree files for SDXLEMUR target
ARM: dts: msm: Enable smmu for shima ufs
ARM: dts: qcom: Change L4P's max output voltage
ARM: dts: msm: Change to auto-specific config for SA8155
ARM: dts: msm: Enable smcinvoke and shmbridge on shima
ARM: dts: msm: Add IMEM entry for Yupik
ARM: dts: msm: Enable qcom,vmid-cp-camera-preview-ro on Shima
ARM: dts: qcom: add physical addr for swr tx slaves
ARM: dts: msm: Add new DT entry for wan agg pkt size
ARM: dts: msm: Add touch support for Command Mode on holi
ARM: dts: msm: Add handles for USB3 interface clocks
ARM: dts: msm: Add ipa_hw support for SDXLEMUR
ARM: dts: msm: remove cpu7 llcc-ddr lat device node
ARM: dts: msm: Add focaltech touch support on holi cdp
ARM: dts: msm: add WL_EN entry in BT node
ARM: dts: msm: Add debugcc and APSSCC clock nodes for sdxlemur
ARM: dts: msm: Update CNSS node for BT GPIO config
dt-bindings: thermal: Add support for modem skin sensor via QMI
dt-bindings: thermal: Add support for bandwidth cooling devices
ARM: dts: msm: update modem qmi sennor list for SHIMA
ARM: dts: msm: Update modem mitigation threshold for lahaina
ARM: dts: msm: Select 120Hz panel as default on 120Hz shima dts
ARM: dts: msm: Vote for DDR BW for MPSS PIL on Lahaina
ARM: dts: msm: Add wireless-fw-name property for Shima platforms
ARM: dts: msm: Add psci and scm nodes for Yupik
dt-bindings: spi_qsd: Add documentation of SPI BLSP driver
ARM: dts: qcom: enable display on trusted vm for shima
ARM: dts: msm: Add BLSP DTSI nodes on sdxlemur
ARM: dts: msm: Enable U1 and U2 on Holi
dt-bindings: i2c-msm-v2: Add snapshot of I2C MSM V2 driver
dt-bindings: qcom-sps-dma: Add snapshot of SPS DMA driver
dt-bindings: Add DT bindings for BLSP UART drivers
ARM: dts: qcom: Update cp channel names for holi
ARM: dts: msm: Add Qpic Nand support for sdxlemur
ARM: dts: msm: Correct name of funnel merg on holi
ARM: dts: msm: add is-always-on flag to fix HS LPI issue for holi
ARM: dts: msm: New touch node for Lahaina CDP
ARM: dts: msm: Disable wakeup capability for soundwire gpio
ARM: dts: msm: Update core isolation and hotplug threshold for lahaina
ARM: dts: msm: Add emergency skin rule for lahaina
ARM: dts: msm: Add modem mitigation for policy engine in lahaina
ARM: dts: msm: Update focaltech enteries on lahaina qrd trustedvm
ARM: dts: msm: Update focaltech enteries on shima trustedvm
ARM: dts: msm: Add 144 fps touch support on shima target
ARM: dts: msm: reserved memory for yupik
ARM: dts: msm: add initial support for hw memlat devices
ARM: dts: msm: Add touch support for holi
ARM: dts: msm: enable lt9611uxc for hdk8350
ARM: dts: msm: add stub interconnect devices for YUPIK
ARM: dts: msm: Remove interconnect phandles from clock nodes
ARM: dts: msm: Update L12C min and init voltage on shima
ARM: dts: msm: Add lcd display support on holi
ARM: dts: msm: add touch for Holi 90hz panel
ARM: dts: msm: Update USB3 DP QMP Phy sequence for Lahaina to v1.10
ARM: dts: msm: Change prng dtsi config from 32 bit to 64 bits
ARM: dts: msm: Enable USB AHB reset on sdxlemur Rumi
dt-bindings: input: touchscren: add description for synaptics_dsx
ARM: dts: msm: Add device tree for Shima IDP/IDPS with 120fps platform
ARM: dts: msm: remove deprecated PCIe AUX CLK frequency for lahaina
dt-bindings: arm: msm: update documentation for PCIe internal AUX CLK
dt-bindings: interconnect: add interconnect bindings
ARM: dts: msm: Add cnss-enable-self-recovery flag for lahaina
ARM: dts: msm: switch off kpti on holi
ARM: dts: msm: Update cnss dt node for holi
ARM: dts: msm: new vdd power rail of USB QMP PHY for lahaina-v2
ARM: dts: qcom: disable panic on single corruption
ARM: dts: msm: Add PCIe0 PHY settings v1.01 for sdxlemur
ARM: dts: msm: Extend pmic dump size for holi
ARM: dts: msm: Enable 747MHz GPU Fmax for Shima
ARM: dts: msm: define new sound card for holi wcd938x with aatc variant
ARM: dts: msm: Add entry for non secure display heap memory
ARM: dts: msm: Add dummy clock nodes for clock controllers for YUPIK
ARM: dts: msm: Add ADC channels and thermal zones to sdxlemur
ARM: dts: msm: Remove PM7250B from sdxlemur pmic overlay
ARM: dts: msm: Add pmesg reserved memory for holi
ARM: dts: msm: add touch for Holi 90hz panel
Revert "ARM: dts: msm: Add GPU SMMU clocks for holi"
ARM: dts: msm: Configure WLAN smmu node in atomic context
ARM: dts: msm: add mclk lpi gpio entry to all wsa881x entries
ARM: dts: qcom: Optimize jeita-fcc-step thresholds
dt-bindings: Add snapshot of batterydata devicetree bindings
ARM: dts: msm: Add WLED support on PM6150l for holi.
ARM: dts: msm: Enable ep delay for holi.
ARM: dts: msm: update low SVS clock corner for holi.
ARM: dts: msm: Add dpdm supply for PM7250b for holi.
bindings: clock: rpmcc: Add clk handoff property.
ARM: dts: msm: correction to adsp variant read entry.
Revert "arm: msm: dts: Disable rimps access till rimps brought up"
ARM: dts: msm: fix to indetify proper adsp variant
ARM: dts: msm: Enable smmu s1 from wlan side
ARM: dts: msm: Add gpu speed bin property for holi
ARM: dts: msm: Add gpu gaming bin support for holi
ARM: dts: msm: Update wlan configuration for holi
ARM: dts: msm: Enable SMMU S1 for USB on Holi
ARM: dts: msm: Enable SMMU S1 for AP on Holi
ARM: dts: msm: enable dcc on holi
ARM: dts: msm: dtsi changes for holi
ARM: dts: msm: Add command mode touch support on holi
ARM: dts: msm: Add notification edge for glink ssr
ARM: dts: msm: correct the audio etm name
ARM: dts: msm: Define console before other QUP devices
ARM: dts: msm: disable wcss cti on holi
ARM: dts: msm: Add support for SCM PAS for holi
ARM: dts: qcom: add support for backlight cooling device on Holi
ARM: dts: msm: Add touchscreen device node for QRD holi
ARM: dts: msm: add display support for qrd holi
ARM: dts: qcom: Add camera dts into holi QRD
arm: msm: dts: Disable rimps access till rimps brought up
Change-Id: I0bcc39a848fce9e17051c31e591032cea18ba020
"LA.UM.9.14.r1-20500.01-LAHAINA.QSSI12.0"
* tag 'LA.UM.9.14.r1-20500.01-LAHAINA.QSSI12.0' of https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers:
disp: msm: add msm framebuffer emulation
makefile: add gki config support for display techpack for kona
Revert "disp: msm: dsi: Add DSI PLL support for 7nm_v4_1 arch"
disp: msm: dsi: Add DSI PLL support for 7nm_v4_1 arch
disp: msm: sde: disable dsi ctrl regulator during deepsleep
disp: msm: sde: update uidle ctl register only for master encoder
disp: msm: avoid minidump region addition for mdss register dumps
disp: msm: add skip panel power off dt property
Change-Id: I1ade9627b3ade718cb923b0ca23031fc9e639808
"LA.UM.9.14.r1-20500.01-LAHAINA.QSSI12.0"
* tag 'LA.UM.9.14.r1-20500.01-LAHAINA.QSSI12.0' of https://git.codelinaro.org/clo/la/platform/vendor/opensource/dataipa:
msm: ipa3: add check in odl pipe cleanup
msm: ipa3: Added changes to check QMI pointer valid or not
msm: ipa: fix to NULL terminate the pointer
msm: ipahal: modify parameter from eq_bitfield[i] to i
msm: ipa3: handling MISRA issue
Change-Id: I79939c82f4245f459dd320ffcd413815f2d18905
"LA.UM.9.14.r1-20500.01-LAHAINA.QSSI12.0"
* tag 'LA.UM.9.14.r1-20500.01-LAHAINA.QSSI12.0' of https://git.codelinaro.org/clo/la/platform/vendor/opensource/camera-kernel:
msm: camera: memmgr: Avoid TOCTOU buffer access on multiple use of same fd
msm: camera: utils: modify debug function logic
msm: camera: fd: fix compile error for kernel 5.4
msm: camera: reqmgr: Reset the slot if it is applied
Change-Id: If3f45f7ce8b70d747a77845b43b7b8ec4aa9c9f9
"LA.UM.9.14.r1-20500.01-LAHAINA.QSSI12.0"
* tag 'LA.UM.9.14.r1-20500.01-LAHAINA.QSSI12.0' of https://git.codelinaro.org/clo/la/platform/vendor/opensource/audio-kernel:
asoc: add more return when msm_audio_ion_alloc failed
audio-kernel: Do SRC with MFC
dsp: dyn mclk support enable/disable in afe_set_lpass_clock_v2
asoc: ignore afe resp status to avoid 2s timeout
asoc: enables paired rx port to address tdm slot shift issue
dsp: functions for paired rx port enable/disable usecases
asoc: change HS_IF dummy to playback
audio-kernel: Reset client info on deregister.
audio-routing: Support Rx to Tx loopback
asoc: fixing incorrect log messages
kernel: add place_marker for sound card register
asoc: SEC CLK enable
ASoC : Add new kcontrol for starting ASRC
soc: swr-mstr-ctrl: Fix swr overflow for wsa
audio-kernel: Disable clock voting logs
asoc: 24 and 32bit format support for ASM loopback and playback
config: remove unused conf for arauto
audio-kernal: Loading only Gen3 specific mixer controls for Gen3 boards
kernel: add place_marker for sound card register
kernel: Add notifier for SSR
asoc: kona: check if codec is enabled
asoc: kona: Add wsa8815 codec and wsa883x codec init
Asoc: check for invalid voice session id
asoc: update port config for kona.
config: Enable digital codec resource manager config
asoc: auto: send effect config based on apptype
asoc: Update dai link for wsa codec dai.
asoc: codecs: Add nullptr check
Audio-kernel: Comparison of unsigned value
asoc : AFE Limiter module control
soc: wsa881x: move analog init complete flag
Change-Id: I566e3efbcd6a900e303bb89fb116e73c8de08bcf