Enable DDR cooling device for Lahaina. This cooling device can place a
DDR vote to maintain a minimum performance level.
Change-Id: Id9f157c43d75887f05150694ec4a0db43c926c45
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Add a new DDR cooling device which can request for a DDR state as a part
of cooling device request. This will help in the situation where DDR has
to be kept at a specific state during thermally constrained situations.
Change-Id: Ic1108cc86424c03e7cb176d595c534e5905c103a
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Add the null checks for irq_chip callback while calling
affinity call of glink interrupt.
Change-Id: I62cec6ade0233094ef9a821185677b703d3ba1a3
Signed-off-by: Raghavendra Kakarla <rkakarla@codeaurora.org>
Clear AOSS_CC_RESET_STATUS::PERST_RAW_RESET_STATUS
after PCIe link training in HLOS. Failure to clear it in
HLOS will result in PBL to consider it a controller reset
pending state during warm reset and initiate a controller
reset even if the PCIe link is up.
Change-Id: I3e5b89181be29062f79e4c5ace1863124367c72c
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Toggle between tcxo and phy pipe clock as part of
LPM sequence. Switch the source to XO before disabling
PCIe gdsc to avoid PCIe gdsc to be stuck until source
is switched to XO.
Change-Id: Ie2044da622962ff316319e7891974621e5c0ee92
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Typec attach_detach handler gets executed which is not
expected for micro-usb design. Return from type-C attach-detach
handler for micro-usb stack.
Change-Id: Ia7bfe6b407757663be4f7d143ccd88a60079657b
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Signed-off-by: Ashish Chavan <ashichav@codeaurora.org>
Add partner registration for otg to provide UX. USB_HAL expects
power_role and data_role to be updated for the notification to UI.
Update power_role and data_role for microusb otg.
Change-Id: I741df638e18a400c862845bddd5bb19130adecd7
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Signed-off-by: Ashish Chavan <ashichav@codeaurora.org>
Snapshot of PCIe endpoint driver as of msm-4.14.
'commit <adeff59> (""drivers: clk: msm:
fix compilation for non DEBUG_FS build"")'.
The following changes were done:
-Replace msm_bus driver with interconnect framework.
-Remove iommu deprecated API's.
-Fix checkpatch warnings on usage of module param.
-Fix several checkpatch warnings.
Change-Id: I04ee8f5d5802af0aa0cdd607a79c91e3eca7f194
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Correct the FM port numbers for Chk 3.x.
They are currently reversed.
CRs-Fixed: 2801744
Change-Id: Id713e373b5db015830f9dc597525e1cfd5519888
Signed-off-by: Satish Kodishala <skodisha@codeaurora.org>
Remove linking and create dependency by exporting the function
in synaptics touch driver.
Change-Id: I494d61fafbed516a39972521b14b0bfc2337b3bd
Signed-off-by: Ravikanth Tuniki <rtunik@codeaurora.org>
Add Synaptics Touch Driver as Modules for Holi GKI.
Change-Id: Id40deb882a80624b702731576effd43a6d43da4a
Signed-off-by: Ravikanth Tuniki <rtunik@codeaurora.org>
This patch adds new IPC log file to dump IRQ registers to know
the interrupt status in dma mode. This will help in debugging
interrupt storm issues in dma mode.
Also increase the IPC log buffer size.
Change-Id: I33a32e8d237769808a9c7553c9c3e6d1024d9f50
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Check for RX data in rx buffer for faulty transfer and add
delay of 2 msecs delay in order for dma rx transfer
to be actually completed.
Also dump required qup registers when the uart dma rx data is
seen as all zeros.
Change-Id: Ifaa0cb7d22b8419ffacfee7212b0a28ed8ebf2a1
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Delete l2wb and l3 access pmu events when the governor
is stopped.
Change-Id: If443cb6b53e2ad43ebee04a1fc3274a31b05e5b9
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
Call perf_event_read_local() to update current counter value
in hw_perf_event structure before saving PMU snapshot to
shared memory.
Change-Id: Id5945cd6b6c9fab6f87917224b5b5f54dca5ef9c
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
Enable required drivers for CPUCP communication on
yupik target.
Change-Id: Ia47a867118e3eadf011228ef21c6a2c87ac7efa4
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
Initial support of rimps PLH interface.
This interface exposes sysfs nodes required to configure
PLH running in rimps.
Change-Id: I18a4cfc346b7923dc083a0433a1993df964dba86
Signed-off-by: Gaurav Singh <sgaurav@codeaurora.org>
Fix to copy nickname to address provided by
nickname pointer and avoid overwriting
pointer value.
Change-Id: I8746d8249e807299ae3bec36f6ed9934d8c1628a
Signed-off-by: Paras Singh Jain <parassin@codeaurora.org>
Add initial support for plh scmi client driver which registers
into scmi framework for plh vendor protocol extension.
Also registers with plh interface driver msm_performance.
Change-Id: I448a714486ff4c7ea38cbeeec1ddb5e183b76e65
Signed-off-by: Gaurav Singh <sgaurav@codeaurora.org>
The perf lock hardening protocol is intended for the management
of perf lock hardening on RIMPS.
The commands in this protocol provide functionality to configure
plh details, plh tunables, configuring the log levels and
debugging support.
Change-Id: I9f5292ee3e32a038160e66d38ec15637a55458fd
Signed-off-by: Gaurav Singh <sgaurav@codeaurora.org>
