The default PWM gpio pin mode was not right for PWM backlight
control. If needs to use PWM backlight, must config the
gpio pinctrl.
Change-Id: I5fd6b947d379b53ef4c358be1b935a2ad4970f99
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
During a dynamic mode switch if the DSI clocks need to be changed,
it would result in a sequence of clock off and on operations. If
this happens after a partial update even though the commands are
sent with an asynchronous wait flag, the clock off forces the commit
thread to wait till the DSI command wait_for_done thread is
scheduled and completed. The change ensures that the clock change is
the first operation that occurs during pre kickoff.
Change-Id: I1b4e765cd0281f1539fc4af309247f3bc0867c1b
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change ensure that in cases panel transfer time is specified,
the final transfer time is calculated in accordance with the minimum
threshold time allowed.
Change-Id: I3442d4d3e8a27ec30d93725cb96b229bb94f2ce2
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change add right only pu support by allowing the dsc to be
flushed when one of the dsc is getting disabled. Since the crtc
swaps the mixers in case of right only partial update, this change
fixes the active display mask passed to encoder so that always the
left only dsc gets programmed. This change also fixes layer mixer
configuration where only one layer mixer is driving the partial
update, the other mixer's configuration is disabled.
Change-Id: I2dd2e9a347797bfe07c90e0ca7f999d151fba933
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Add handoff implementation for color processing features when switching
from primary VM to trusted VM.
Change-Id: I9c3a168f70f3981e912bf37533f212880ab30924
Signed-off-by: Ping Li <pingli@codeaurora.org>
Install backlight property only for primary VM and avoid
backlight updates when HW is not owned by the VM.
Change-Id: I35f26d5c41ea57c7271382a1fe571e65ee4520c1
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Cache controller is not a sde property, add
proper parsing logic to get the compatible version
of llcc cache.
Featurise system cache support with a catalog entry as it
provides a finer control to enable/disable llcc
for display.
Change-Id: I07fa8e144d0a4fa32ab16e46142c7b68f771d9c7
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Connector state in crtc_atomic_check is still the old state, use
connector_mask to update the actual connector in the list to fix
zero connector issue.
Change-Id: I91541063acbb19beced3004a030c7f27abf9ee50
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Use MDP scratch registers to pass drm mode index information
between the VMs. Expose the APIs which LA VM can use to set
the current mode for all active displays before handoff.
LE VM relies on this information to set the corresponding
display in correct mode during handoff.
Change-Id: I4569dd58e953e588bca816ac718335d3f3f7e29b
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
The MEM & IRQ lend handlers signals the resources
are lent from the primary VM. Reserve the SDE HW
resources in trusted VM using the cont-splash path
and setup the SDE & DRM software states. Set the
DSI connector status to active for the handoff
display during the start and disable it at the end
of the session.
Change-Id: I75b6df735eb5609cc521808aca0ddfb0b3993e84
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Install backlight property only for primary VM and avoid
backlight updates when HW is not owned by the VM.
Change-Id: Ief831661e2b9419a0b9d392742bf96300ecc0d48
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Check against the HW ownership before servicing vblank
control requests from clients.
Change-Id: I22544817fde72afa7f668fbc08caa28abe0330ee
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Extends atomic check to validate TUI transition request aginst
SDE and non-SDE client states. Triggers HW assignment after
making sure current frame is completely flushed out of HW
pipeline. Initiate the acquire after TUI end after restoring
the software states.
Change-Id: I6ceccd44c18526ff818723b5631b66af3ff083c1
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
client_pre_release/client_post_acquire hooks in vm_ops allows non-SDE
clients to register for callbacks to be invoked
- before releasing the resources from the current VM so that
the client can updates the respective sw state to indicate
the absence of HW ownership
- before the first frame push after acquiring the HW to update
reset the respective sw state to indicate the presence of
HW ownership and resume operations
Change-Id: I93e5a2b43c79b4e7cc28e6e0129d8091aa0e508d
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Add VM layer files to handle VM specific operations
for primary and secondary VM's. They interact with
Hypervisor RM modules to LEND/ACCEPT/RELEASE/RECLAIM
HW resources. They also handle notifications for each
of the above Hyp RM operations to acquire and update
the SDE software states.
Change-Id: I5982f4bf56550dc464797c62cb356be39925b21c
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Creates a deep copy of a struct which previously was shallow.
Also adds null checks which prevent segmentation faults.
Change-Id: I9155f632736fdb30e31f28f55ebe92954956a82d
Signed-off-by: Orion Brody <obrody@codeaurora.org>
This change adds 2 vsync delay after changing the timing engine
parameters namely the porches to update the refresh rate.
This ensures that panel vsync is updated as per new timing before
modifying it again.
Change-Id: I5866ea2f6f2e68bc8ce7435c4a5dbe27d8ebdd91
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
When hpd disconnect is received, the dp driver sends an uevent to
usermode and waits for the usermode to tear down all external displays
before turning off the dp link. If the wait for uevent completion
times out or exits prematurely due to a race condition with the
connect path, it is possible for the dp link to be turned off
prematurely, with displays still in enabled state. On a subsequent
hpd disconnect, the driver attempts to disable the display causing
this issue since the link has been already turned off.
This change adds a check for display status after uevent handling and
before turning off dp link, to make sure the displays are always
cleaned up before the link is turned off. Any future attempts to
disable from usermode will be ignored.
Change-Id: I404ad90b037fede9c9469a2fd16ca1fbdbd36b7c
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
When dp disconnect is triggered, as part of the teardown process, the
driver sends a notification to audio driver and waits for the audio
driver to complete before proceeding. When back to back disconnects
are triggered currently there is no check if a disconnect is already
in progress. So the driver ends up reinitializing the signal
completion that the previous disconnect thread is waiting on causing
this issue.
This change adds a check at the beginning of disconnect handling and
bail out if a disconnect is already in progress.
Change-Id: I2eaee339408d9dbc120f8efc14d86fca0ebb0758
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
