Add support to handle rssi based assoc rejection from a bssid and
Try to connect to this bssid only after time interval indicated in
Assoc reject or when rssi has improved by margin indicated in Assoc
reject.
Change-Id: I6363bf5346ff8804611afbac3058819dc820092d
CRs-Fixed: 2070452
Trigger packet logs if deauth/Disconnect comes with reason code
other than eSIR_MAC_UNSPEC_FAILURE_REASON,
eSIR_MAC_DEAUTH_LEAVING_BSS_REASON,
eSIR_MAC_DISASSOC_LEAVING_BSS_REASON
Change-Id: I906abf4e4b7c7b9fb109fa1ead1afed15a9f5e81
CRs-Fixed: 2071173
In packet logs currently HB failure, HO failure and No scan results
are marked as Non Fatal and because of that, these failures are not captured
in packet logs.
Fix this by making these events as FATAL.
Change-Id: I6db2f3cd843b7f84081332f2385fbfb0a2992078
CRs-Fixed: 2061842
In certain cases HDD fails to receive callbacks for the scan requests
queued to SME. Kernel may free up these scan requests due to timeout.
During driver shutdown and exit if scan done is performed on these
stale scan requests, kernel crash may occur.
Set a timer of 60 seconds on queued scan requests, after expiry BUG_ON
for debugging purposes.
Change-Id: I6db155b17a8a5ae87208ec84eaab221a53623a63
CRs-Fixed: 2070594
If registration of callback 'hdd_send_action_cnf_cb' fails with PE due
to some error case, then PE is not going give the ack confirmation
for action frames which can lead to in p2p connection failure.
CRs-Fixed: 2075708
Change-Id: Ia7b670f186975f5139e37e79230de56bc8ab868b
During wlan disconnect before disabling tx queues, observed continuous
logs in ndo_start_xmit, because of invalid station ID, leading to WD bark.
Move log level to info from error, if driver fails to find valid station
ID while processing ndo_start_xmit.
CRs-Fixed: 2022473
Change-Id: I122219d22e2e19ddb3ca6aa60c38177f2a95ac43
sme_set_5g_band_pref is declared inside FEATURE_WLAN_ESE feature flag
by mistake which can cause a symbol undefined error if FEATURE_WLAN_ESE
is not declared.
Move sme_set_5g_band_pref outside of conditional block FEATURE_WLAN_ESE.
Change-Id: I80b045100b068d08873b136fdf676e99e36a57cd
CRs-Fixed: 2016629
Add support for 5Ghz network RSSI boost/penalty preference
based on ini values.
Change-Id: Ia3ae5dcc35b9a85fde5a609f8f27ff8b4bc35cec
CRs-fixed: 1085554
If during set link state, vdev stop fails, then the params pointer
is not removed from the vdev resp queue and set link state rsp is
called which will free this params pointer.
This leads to double free of the params memory when driver try to
remove the req params from vdev resp queue when cleanup vdev resp
queue is called.
To fix this remove vdev stop req from vdev resp queue if vdev stop
fails.
Change-Id: I1da763d2cc35c12c1b55a3c0057b893e9ef8d48f
CRs-Fixed: 2080189
qcacld-2.0 to qcacld-3.0 propagation
On some channel, AP's tranmission power is less than
regulatory tx power as per db.txt. While sending Assoc request,
driver should populate negotiated power (min power of AP's tx power and
regulatory power for operating channel) in Assoc request.
This doesn't happen currently, fix it to ensure that
driver follow negotiated power.
Change-Id: I7755894b72e4f0f7ffc371abbbda5c75b2851b13
CRs-Fixed: 2011396
Currently if the peer is not registered, we add packets to a cached_bufq
(within a peer). In case the peer is not registered for quite a long
time, or if the vdev->rx pointer is somehow not set (when the vdev is
associated), this will lead to large number of nbufs from the FW being
added to this list. Eventually, we will run out of memory trying to add
nbufs to this list.
Keep an upper threshold on the number of elements in the cached_bufq.
Drop elements once the threshold is reached.
Change-Id: I02db9347addd77976f1d84897eee20d1e6f9c4ec
CRs-Fixed: 2026991
qcacld-2.0 to qcacld-3.0 propagation
Currently, driver doesn't consider tx power which was negotiated
at the time of connection for max tx power for RRM Link Measurement
Request.
Fix this by not allowing tx power more than pSessionEntry->maxTxPower.
Change-Id: Idebe6d11e05da0b3b8186e2c84ff8ad4ac124fdc
CRs-Fixed: 2021835
When Driver does disconnect as part of heartbeat failure
or kickout event, trigger fatal event to capture pktlog.
Change-Id: I43a486afeccc4acd4be542357b803d492afde9c0
CRs-Fixed: 2030718
Currently, a hard-coded enhanced multicast filter configuration is being
sent to firmware. Instead, create a set of enable/disable APIs, and
configure enhanced multicast filter based on advertised firmware
capability.
Change-Id: I488b4a921612e1081266be8831be098d755375f9
CRs-Fixed: 2078615
In the suspend path, the code waits for all active/pending scans to be
cancelled before continuing the suspend. Instead, for better power
savings, abort all active/pending scans during suspend and immediately
continue the suspend process.
Change-Id: I16a5429c00034fe58fb4c70a8dacda666ac54227
CRs-Fixed: 2073229
Fix incorrect processing of encrypted auth frame by allocating
appropriate local buffer and using correct type for frame length.
Change-Id: I87d6f4c3c43dd332d5b1877ddf4b3b46a717468b
CRs-Fixed: 2081734
Currently, numap is int and is assigned with a uint32 value from
fw which might lead to integer overflow. Also, when multiplying
the uint32 value with sizeof dest_ap could lead to int overflow
if the value of numap is close to uint32's maximum limit.
Fix/Modify numap to uint32 to be in sync with value from fw cmd.
Also add check to trim down numap value to max (10) if value is
greater than max (10).
Change-Id: I060f585c8c951807cd32b5eec75c1bad2e84a75b
CRs-Fixed: 2082665
QCA_WIFI_3_0_EMU flag is introduced for IHelium emulation
platform, where wait/error timeouts are kept for larger values.
Remove this flag for production target.
Increase tx completion drain delay to 1sec from 500ms to avoid
unwanted suspend abort.
Change-Id: Ie0633b3a2bbc9e2237039311af7417952961aada
CRs-Fixed: 2047750
qcacld-2.0 to qcacld-3.0 propagation
Update EDCA parameter if the country is in European
Union based on new ETSI RED channel access parameters.
Change-Id: I08b1a0d7cd0ee1f6985cd0810c5c4c1108e582b4
CRs-Fixed: 2078985
Skip FW memory dump in SSR case for HL SDIO solution.
HL SDIO uses the diag read API to read by 4 bytes,
which is too slow to meet SSR time requirement.
Change-Id: Iacde90ab0ec84f29f3744bf4497ec8fd8517600a
CRs-Fixed: 2071329
Vendor features are used to indicate OCE support
from driver to user space which are set based on ini
params for STA and SAP.
Change-Id: I1b9039307d5477883a2fd23e972d20234908ee24
CRs-Fixed: 2031980
Fix array out-of-bounds access while populating the BSS rate set.
The issue was seen while populating the basic supported rate
and extended rate sets.
CRs-Fixed: 2081423
Change-Id: I8626399b7f9a04dc368daa582b6a09500a7ea015
propagation from qcacld-2.0 to qcacld-3.0.
While processing setpno ioctl, input arguments are not validated
and also while parsing arguments, there is a possibility of Host
accessing memory beyond memory allocated as there is no check
whether is Host is accessing valid memory or not.
Validate input arguments and make sure Host won't access invalid
memory, while processing setpno ioctl.
Change-Id: Ica9ea56283d55282cff3ccd349e4bc1c08b80e70
CRs-Fixed: 1097868
Rx hash deinit sets hash_table to NULL, at the same time
there can be active tasklet context accessing the rx hash list.
Prevent rx hashlist access after rx hash deinit and set the netbuf
to NULL once netbuff is popped out of the list.
Change-Id: I4e30dd69ece33c3cc768842274d5307c0bf29a37
CRs-Fixed: 2049121
sap_restart_on_ch_avoid ini parameter holds good for both SAP and GO.
So to make it generic, rename to ignore_restart_on_chan_avoid_event.
Change-Id: Ic68014a71b36e00c268da50528bf5e14fd87d007
CRs-Fixed: 2027436
Driver is disabling the tdls for 5s from the last p2p-listen request
received. This is leading to tdls connection failure even after p2p
find has been stopped.
So reducing the min and default timer values 500ms and 2s respectively.
CRs-Fixed: 2078933
Change-Id: Id1ab3945d029de8154aede403b354aec99f4cd79
