Add a sys entry in /sys/class/fingerprint/*/vendor
This sys entry can show vender name of current installed fps..
Change-Id: I608bac2fd2dfc6eb22cb105150b502c24360503c
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1320504
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Driver code failed to unregister all resoures in probe function.
So after rmmod this kernel module, can not insmod again.
Change-Id: I481e823adc506c1666ef7095c23f99744d2a363d
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1313653
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
PDT scan assigns bl_version based on version of F34. Thus BL_V7
is assigned whenever BL version is 7 or 8. However, if we run
erase_all and then attempt reflashing firmware from the image
that belongs to BL version 8, reflash will fail. Thus we query
F34 after calling erase_all.
Change-Id: I75c8d26eb09f1dd93aea1ba1f0f5202c7736740c
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1320478
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
The basic state machine for charging incorrectly is reading
the qcom power supply instead of the bms power supply
for the charge full and charge full design. This was
preventing the age calculation from occuring.
Change-Id: I8185529d9eec016b30bdc4c43a1c63c4cb0a6870
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1317787
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The Phone Power supply which is used to denote that the
MOD is attached to a Phone had the incorrect Type.
It was set to USB and thus made Framework think that
there was a USB cable attached. Fix this by changing to
Type MAIN.
Change-Id: I145e01a6affd5c74ee46641c4c3c7c1c73618a69
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1317772
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Curtis Porter <porterc@motorola.com>
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Instead of using driver's instance number, this commit assigns input
device name based on the name of touchscreen class sysfs entry. This
allows for static input device name independent on number of
running instances. This name is controlled by
synaptics,class-entry-name device tree option and default to
primary if the option is not provided.
Change-Id: If6f6ddc895688edd2d9128d262407ea2a0c8c60b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1317273
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Due to ability to tun multiple driver instances, it makes more
sense to distinguish primary touch. Thus driver will handle a
new device tree option allowing for specifying class sysfs
entry name explicitly.
Change-Id: I3f3154db57c01f0d1ddea2df7716aadec7f48d9a
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1316818
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
There are some weird age reporting from the dual fuel gauges.
For now so that it does nto corrupt and write bad values
into units only send 100. This will allow the other layers
to test interfaces.
Change-Id: Ic2378106e2583887183b8dce74b1f95c16221e54
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1316420
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Eyob Tesfu <Eyob.Tesfu@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Create a new group and make the age parameter. This will be
added to the power supply kobject so that it shows up in that
power supply's sysfs directory.
Change-Id: I95cc23242df5bd7096d0b4e554e31647e46ce3a4
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1315612
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Eyob Tesfu <Eyob.Tesfu@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
This message adds the Charge Rate message. To add this message
a new group had to be created for the battery power supply
kobject. Then so that the uevent propagates the new message
a new version of power_supply_changed had to be added this driver
so taht kobject_uevent_env could be called with the new
information.
While this was being done the other paramater that is missing,
age, was also added. It calculates the age from either the
single battery or both if it is a dual configuration.
The choice of using the lowest between the 2 in a dual
battery configuration was taken and seems the best to force
replacement of both batteries at service time.
Change-Id: Ifc34dfca3602bce042a2545a15914b1421198942
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1315611
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Eyob Tesfu <Eyob.Tesfu@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Flag splash screen mode was introduced to to work around
deficiencies in DRM framework found on early stages of development.
Once DRM matured, flag becomes unnecessary. Removing this flag
revealed a bug in the logic. This commit is fixing it.
Change-Id: I0f8310f79732e675e6be7f5e373e6b2f07765e0c
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1316335
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
On Some units battery capacity and MONOTONIC_SOC values seems
to be less than the reported capacity. In this case reported
capacity will not get updated until the unit is rebooted.
Change-Id: Ibfcaf31509e4e0d987e620f9896b66a70544689d
Reviewed-on: https://gerrit.mot.com/1315042
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
On PCB level driver should not attempt loading modules. Bare board
detection using DRM framework is based on reported panel name. Main
panel will report dummy name while CLI will report an empty name.
Driver will fail probe for main and CLI touches once this condition
detected.
Change-Id: I7b54dc59287140cdf8a88f3c220ab76e6421b133
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1314565
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add a uevent to line up with the usb_ext online
and offline.
Change-Id: I6ceeeefaa03835f140e042d6c5a0e198fb35ba1c
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1294012
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jing Zhao <zhaojing@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
NXP smartPA new algorithm for 8937/8940 need to set
rpc_send delay time to 5ms.
Change-Id: I79ec1c1493f8b32f562bbc7e8a78f64e62e3ef6a
Signed-off-by: guoyf2 <guoyf2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1310382
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Reviewed-by: Yunfei Guo <guoyf2@motorola.com>
DRM framework is not sending resume event, thus recovery needs
another trigger. Then we cannot rely on touch IC reporting
flash programming mode if firmware has been wiped with erase
all (and this is the case when touch IC comes w/o any firmware
pre-flashed). Thus we load F34 handler first to ensure solid
flash mode detection.
Change-Id: I084188dec58d2dc690f5c7c7415329d0adb92bd9
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1310296
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
All show/store methods in test reporting module declared as macros.
That makes it convenient to log what resorce is being accessed and
in which way (read/write). Adding some logs to test reporting code
for debug purposes.
Change-Id: I7369604af33a767c11ae539430d92b1f02c5515a
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1312205
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Reduce the idle timeout from 5 seconds to 1 second
in an attempt to limit the amount of time the uart
keeps the system awake.
Change-Id: I667922b8eafe91e434a68a40b92beeac8bd0467c
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1310926
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Recent build issue with absent touch firmware prompted to add a new
test case. As erasing firmware is potentially dangerous, erase_all
will be only enabled in factory mode for TCMD to access.
Change-Id: Ia27593f85dd4d83cc327a81ded9ac7a4410e3220
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1307995
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Tiago Ganselli <ganselli@motorola.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Bug2go turns on the vibrator，Kenel is in suspend process at this time.
After the vibration time is over,Kenel suspend the I2C bus.
Causes the driver to shut down the vibrator to fail.
Change-Id: If6a5c7ca42be7a55c17f45c47748f785dbc317b1
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1309316
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Bug2go turns on the vibrator，Kenel is in suspend process at this time.
After the vibration time is over,Kenel suspend the I2C bus.
Causes the driver to shut down the vibrator to fail.
Change-Id: I881eb08efc0b7a1c9f934aa886f1eeab2da9d55d
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1307591
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Mot changes ported from SDM710 Android P:
(CR): Update VL53L1 ToF makefiles
Mot changes ported from 8998 Android O:
(CR): 8998: ToF sensor VL53L1 bring up
(CR): change netlink protocol ID
(CR): moto change for TOF_INT
(CR): update pinctl and regulator for power
(CR): 8998: To make laser sensor work on Nash DVT1B
(CR): moto changes on 7.2.1
(CR): implement sar function
(CR): turn off l22 when sensor is off
(CR): Apply moto changes based on new ST driver 8.0.0_b4.1.0_1268
(CR): adjust xtalk value per ST's request
(CR): fix laser autonomous mode issue
(CR): fix black target at 0mm range issue
(CR): [CTS] Nash ATT: 4 failures on Module CtsSensorTestCases
(CR): unlock ipp_mutex in ipp_in_process to avoid deadlock.
(CR): Set timing budget for SAR mode
(CR): Add default calibration
Change-Id: I52949c420cbb5c166b7b987f552d0e982e6398bb
Reviewed-on: https://gerrit.mot.com/1305297
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Sumit Jamadar <xkbr38@motorola.com>
Reviewed-by: Rav(CR) Vembu <raviv@motorola.com>
Submit-Approved: Jira Key
VL53L1 driver code from STM
Maintenance 3 release.
Modifications
1. Ambient level is now available in ranging data when no target is
detected
2. When no target is detected the ranging data are set to fixed values
and range status equals 255
3. New tuning parameter to choose number of measurement loops for the
simple offset calibration
4. Support for new Xtalk calibration method(FullROI)
5. Code cleanup to comply with linux checkpatch(kernel version 4.14)
6. In Ranging/MultiZone mode, the input sub-system injecting data
package format has to be compliant with requirements of QCOM Sensor
Event data packing
7. In Lite/Autonomous mode, the input sub-system injecting is disabled
temporarily
8. Support for Autonomous Low power mode in Linux driver
9. Deadlock fix (this was provided as a patch on Maint2 some time back)
10. Allow Tuning parameter update anytime
Fixes:
11. Code optimization in histogram functions saved about 4Kbytes of
stack size
12. Improved accuracy in offset calibration functions
13. Improved accuracy in inter measurement period used for TIMED modes
Change-Id: I603d25d54a5f264eb415431ee3acecb74961a301
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Reviewed-on: https://gerrit.mot.com/1304907
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Sumit Jamadar <xkbr38@motorola.com>
Submit-Approved: Jira Key
Original change made to fwu_read_flash_status and fwu_wait_for_idle
functions unexpectedly created incompatibility with older BL
versions. This commit restores compatibility with BL version
6 and older.
Change-Id: I30d20fa6acd3352dd01ec3ac7b681297a046d699
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306274
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
User an orderly shutdown for factory kill instead of a
kernel power off. The orderly shutdown will attempt to
call the reboot binary from userspace first, and then
fallback to kernel power off if it fails.
Change-Id: I38fc885547b31231fc30eb6bce7163f4e3dd0a24
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306845
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Remove power_supply_unregister calls on shutdown. The power
supplies use devm register so it should not be needed.
This resolves warnings about reference counts on factory kill
and a potential race condition with power_supply_changed.
Change-Id: I86e78d9b685ba162fb5e5492c4f017227f287e3d
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306182
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Ling Jin <lingjin@motorola.com>
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Fix the following user build error:
/motorola/kernel/modules/drivers/mmi_muc_uart/mmi_uart.c: In function
'mmi_uart_close':
/motorola/kernel/modules/drivers/mmi_muc_uart/mmi_uart.c:416:6: warning:
'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
error, forbidden warning: mmi_uart.c:416
make[2]: *** [../../motorola/kernel/modules/drivers/mmi_muc_uart/
mmi_uart.o] Error 1
Change-Id: I156ea7cabddb21092c7dc024c28caa7066450d14
Reviewed-on: https://gerrit.mot.com/1306327
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Fix for smart amplifier silicon errata that creates non-deterministic
PLL phase lock with relation to word clock resulting in erroneous
signal output timing. This is the root cause of high-rate AoU falsing.
PROPAGATED_From: (CR)
Change-Id: I292310ba06d90b0e927dd7c60c347078d9b04186
Signed-off-by: Yoon (Seungyoon) Lee <w22905@motorola.com>
Reviewed-on: https://gerrit.mot.com/1269866
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1302826
Due to integrated circuit limitation,
use firmware to control GLOBAL_EN register bit
based on received GPI input.
If enabled, firmware, upon receiving GPI value,
will control GLOBAL_EN register bit accordingly.
Cirrus-JIRA-fixed: MMI-942, MMI-953
PROPAGATED_From: (CR)
Mot-CRs-fixed: (CR)
Change-Id: Ied87df36bf3f3914b419d472df7d095e8b1a2fbf
Signed-off-by: Li Xu <li.xu@cirrus.com>
Reviewed-on: https://gerrit.mot.com/1269398
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Patrick Gries <patgries@motorola.com>
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1302827
Record the muc fw vers when it is sent from the muc
and provide access to it from an attribute.
Change-Id: Ibbee1cf8c7c6ef7a6d936e8d08ff198d0d963d75
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1303136
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The Reverse has been shown to also get stuck with VBUS above VBATT
The first check for the Reverse Boost fix was that VBATT > VBUS
so in this case it was not tripping. Fix this by using a 100 mV
window to decide if VBUS and VBATT are close enough independent
of which one is greater.
Change-Id: I091e5aedd8a819fd7174d92907d252709a03b78f
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302801
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Add message type for debug messages from the muc.
Print the payload to dmesg when it arrives.
Change-Id: I133609c9ff678ed385ab8ff773648a635a24c178
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302761
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Recalibrate the capsensor when the extcon
flip device is changed.
Requires an extcon parameter in the device
tree node.
Change-Id: I7a7408a064620fdd67a55a7f2f877d4a3542bf00
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1290732
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Test reporting module creates subfolder that isn't associated with any
device. This commit defines kobject sysfs_ops to apply custom attribute
structure containing pointer to RMI4 data to all F54 show/store
methods. Config registers structures now dynamically allocated
individually for each driver's instance that allows full use of
config modifiers.
Change-Id: I103b64df418084dc8e713f643c0078256d9c79d4
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1297200
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
MMI Synaptics driver now is capable of supporting test reports while
running multiple instances of the driver. Test reports used in factory
and an important part of Ghostbusters app.
Change-Id: I02a9d8b1151f810b90f83e02ec0d302755a15be5
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1295407
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
If there are some touch event not release before IC go to suspend.
Driver helps to report up events before suspend.
Change-Id: I02f43e42e65b93d555fedc6bead2c5959193f6ce
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302438
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
There is a race between the muc triggering a
wake event and uart init completion.
When the wake event wins errors such as "no tty"
will be seen. Fix this by starting the uart
module before registering the wake interrupt
handler.
Also moves the ldisc (rx callback) for the uart
module to after the "set ready" so we don't
start processing rx messages before we can
send a response.
Change-Id: I83380eabfd7aa4dfb8b3fac7fb7c4d4718ef8034
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1297199
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Access to packet registers was not supported in driver running
multiple instances. This commit provides a fix and allows
config modifiers to become re-enabled.
Change-Id: I20907f5d5c94fa724dbac7412bdfe31c0038a925
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1293968
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
add dts param to make different power off behavior
by the new dts param.
Change-Id: Ida804b5fa445f08592a8972125a6326088a3ce06
Reviewed-on: https://gerrit.mot.com/1291485
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
In exfat_find_dir_entry, if there doesn't have a TYPE_STREAM(0xc0) entry
before TYPE_EXTEND(0xc1), it will cause kernel panic for the kernel poniter
uniname accessing invalid address
Propogated from OMR1.
Change-Id: Ic8063eafc1c458c96c18a96d58dacd8f33695bb2
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1235768
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yue Sun <sunyue5@lenovo.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Signed-off-by: yuedl1 <yuedl1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1290985
Reviewed-by: Shi-Yong Li <a22381@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
