Reduce the idle timeout from 5 seconds to 1 second
in an attempt to limit the amount of time the uart
keeps the system awake.
Change-Id: I667922b8eafe91e434a68a40b92beeac8bd0467c
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1310926
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Recent build issue with absent touch firmware prompted to add a new
test case. As erasing firmware is potentially dangerous, erase_all
will be only enabled in factory mode for TCMD to access.
Change-Id: Ia27593f85dd4d83cc327a81ded9ac7a4410e3220
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1307995
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Tiago Ganselli <ganselli@motorola.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Bug2go turns on the vibrator，Kenel is in suspend process at this time.
After the vibration time is over,Kenel suspend the I2C bus.
Causes the driver to shut down the vibrator to fail.
Change-Id: If6a5c7ca42be7a55c17f45c47748f785dbc317b1
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1309316
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Bug2go turns on the vibrator，Kenel is in suspend process at this time.
After the vibration time is over,Kenel suspend the I2C bus.
Causes the driver to shut down the vibrator to fail.
Change-Id: I881eb08efc0b7a1c9f934aa886f1eeab2da9d55d
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1307591
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Mot changes ported from SDM710 Android P:
(CR): Update VL53L1 ToF makefiles
Mot changes ported from 8998 Android O:
(CR): 8998: ToF sensor VL53L1 bring up
(CR): change netlink protocol ID
(CR): moto change for TOF_INT
(CR): update pinctl and regulator for power
(CR): 8998: To make laser sensor work on Nash DVT1B
(CR): moto changes on 7.2.1
(CR): implement sar function
(CR): turn off l22 when sensor is off
(CR): Apply moto changes based on new ST driver 8.0.0_b4.1.0_1268
(CR): adjust xtalk value per ST's request
(CR): fix laser autonomous mode issue
(CR): fix black target at 0mm range issue
(CR): [CTS] Nash ATT: 4 failures on Module CtsSensorTestCases
(CR): unlock ipp_mutex in ipp_in_process to avoid deadlock.
(CR): Set timing budget for SAR mode
(CR): Add default calibration
Change-Id: I52949c420cbb5c166b7b987f552d0e982e6398bb
Reviewed-on: https://gerrit.mot.com/1305297
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Sumit Jamadar <xkbr38@motorola.com>
Reviewed-by: Rav(CR) Vembu <raviv@motorola.com>
Submit-Approved: Jira Key
VL53L1 driver code from STM
Maintenance 3 release.
Modifications
1. Ambient level is now available in ranging data when no target is
detected
2. When no target is detected the ranging data are set to fixed values
and range status equals 255
3. New tuning parameter to choose number of measurement loops for the
simple offset calibration
4. Support for new Xtalk calibration method(FullROI)
5. Code cleanup to comply with linux checkpatch(kernel version 4.14)
6. In Ranging/MultiZone mode, the input sub-system injecting data
package format has to be compliant with requirements of QCOM Sensor
Event data packing
7. In Lite/Autonomous mode, the input sub-system injecting is disabled
temporarily
8. Support for Autonomous Low power mode in Linux driver
9. Deadlock fix (this was provided as a patch on Maint2 some time back)
10. Allow Tuning parameter update anytime
Fixes:
11. Code optimization in histogram functions saved about 4Kbytes of
stack size
12. Improved accuracy in offset calibration functions
13. Improved accuracy in inter measurement period used for TIMED modes
Change-Id: I603d25d54a5f264eb415431ee3acecb74961a301
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Reviewed-on: https://gerrit.mot.com/1304907
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Sumit Jamadar <xkbr38@motorola.com>
Submit-Approved: Jira Key
Original change made to fwu_read_flash_status and fwu_wait_for_idle
functions unexpectedly created incompatibility with older BL
versions. This commit restores compatibility with BL version
6 and older.
Change-Id: I30d20fa6acd3352dd01ec3ac7b681297a046d699
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306274
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
User an orderly shutdown for factory kill instead of a
kernel power off. The orderly shutdown will attempt to
call the reboot binary from userspace first, and then
fallback to kernel power off if it fails.
Change-Id: I38fc885547b31231fc30eb6bce7163f4e3dd0a24
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306845
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Remove power_supply_unregister calls on shutdown. The power
supplies use devm register so it should not be needed.
This resolves warnings about reference counts on factory kill
and a potential race condition with power_supply_changed.
Change-Id: I86e78d9b685ba162fb5e5492c4f017227f287e3d
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306182
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Ling Jin <lingjin@motorola.com>
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Fix the following user build error:
/motorola/kernel/modules/drivers/mmi_muc_uart/mmi_uart.c: In function
'mmi_uart_close':
/motorola/kernel/modules/drivers/mmi_muc_uart/mmi_uart.c:416:6: warning:
'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
error, forbidden warning: mmi_uart.c:416
make[2]: *** [../../motorola/kernel/modules/drivers/mmi_muc_uart/
mmi_uart.o] Error 1
Change-Id: I156ea7cabddb21092c7dc024c28caa7066450d14
Reviewed-on: https://gerrit.mot.com/1306327
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Fix for smart amplifier silicon errata that creates non-deterministic
PLL phase lock with relation to word clock resulting in erroneous
signal output timing. This is the root cause of high-rate AoU falsing.
PROPAGATED_From: (CR)
Change-Id: I292310ba06d90b0e927dd7c60c347078d9b04186
Signed-off-by: Yoon (Seungyoon) Lee <w22905@motorola.com>
Reviewed-on: https://gerrit.mot.com/1269866
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1302826
Due to integrated circuit limitation,
use firmware to control GLOBAL_EN register bit
based on received GPI input.
If enabled, firmware, upon receiving GPI value,
will control GLOBAL_EN register bit accordingly.
Cirrus-JIRA-fixed: MMI-942, MMI-953
PROPAGATED_From: (CR)
Mot-CRs-fixed: (CR)
Change-Id: Ied87df36bf3f3914b419d472df7d095e8b1a2fbf
Signed-off-by: Li Xu <li.xu@cirrus.com>
Reviewed-on: https://gerrit.mot.com/1269398
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Patrick Gries <patgries@motorola.com>
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1302827
Record the muc fw vers when it is sent from the muc
and provide access to it from an attribute.
Change-Id: Ibbee1cf8c7c6ef7a6d936e8d08ff198d0d963d75
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1303136
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The Reverse has been shown to also get stuck with VBUS above VBATT
The first check for the Reverse Boost fix was that VBATT > VBUS
so in this case it was not tripping. Fix this by using a 100 mV
window to decide if VBUS and VBATT are close enough independent
of which one is greater.
Change-Id: I091e5aedd8a819fd7174d92907d252709a03b78f
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302801
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Add message type for debug messages from the muc.
Print the payload to dmesg when it arrives.
Change-Id: I133609c9ff678ed385ab8ff773648a635a24c178
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302761
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Recalibrate the capsensor when the extcon
flip device is changed.
Requires an extcon parameter in the device
tree node.
Change-Id: I7a7408a064620fdd67a55a7f2f877d4a3542bf00
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1290732
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Test reporting module creates subfolder that isn't associated with any
device. This commit defines kobject sysfs_ops to apply custom attribute
structure containing pointer to RMI4 data to all F54 show/store
methods. Config registers structures now dynamically allocated
individually for each driver's instance that allows full use of
config modifiers.
Change-Id: I103b64df418084dc8e713f643c0078256d9c79d4
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1297200
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
MMI Synaptics driver now is capable of supporting test reports while
running multiple instances of the driver. Test reports used in factory
and an important part of Ghostbusters app.
Change-Id: I02a9d8b1151f810b90f83e02ec0d302755a15be5
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1295407
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
If there are some touch event not release before IC go to suspend.
Driver helps to report up events before suspend.
Change-Id: I02f43e42e65b93d555fedc6bead2c5959193f6ce
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302438
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
There is a race between the muc triggering a
wake event and uart init completion.
When the wake event wins errors such as "no tty"
will be seen. Fix this by starting the uart
module before registering the wake interrupt
handler.
Also moves the ldisc (rx callback) for the uart
module to after the "set ready" so we don't
start processing rx messages before we can
send a response.
Change-Id: I83380eabfd7aa4dfb8b3fac7fb7c4d4718ef8034
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1297199
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Access to packet registers was not supported in driver running
multiple instances. This commit provides a fix and allows
config modifiers to become re-enabled.
Change-Id: I20907f5d5c94fa724dbac7412bdfe31c0038a925
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1293968
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
add dts param to make different power off behavior
by the new dts param.
Change-Id: Ida804b5fa445f08592a8972125a6326088a3ce06
Reviewed-on: https://gerrit.mot.com/1291485
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
In exfat_find_dir_entry, if there doesn't have a TYPE_STREAM(0xc0) entry
before TYPE_EXTEND(0xc1), it will cause kernel panic for the kernel poniter
uniname accessing invalid address
Propogated from OMR1.
Change-Id: Ic8063eafc1c458c96c18a96d58dacd8f33695bb2
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1235768
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yue Sun <sunyue5@lenovo.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Signed-off-by: yuedl1 <yuedl1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1290985
Reviewed-by: Shi-Yong Li <a22381@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Change drv2624 haptic gpio request mathod from
gpio_request to devm_gpio_request_one.
This can make it easy to deal with the compatibility
with other haptic driver IC.
Change-Id: Iccdb31ab8718e442499cd1c7a27d26b78cd9a521
Signed-off-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1287075
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wen Xie <xiewen3@motorola.com>
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Without wakelock, i2c would suspend when vibration is on going, which
may cause the STOP command failed to be sent and in turn leave the phone
vibrating for a long time.
Change-Id: I821ef7deb848fd6376102885cfef2deb58741fcf
Signed-off-by: yangjq <yangjq@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1287662
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
-1, define PD reponds result
enum mmi_pd_pps_result {
NO_ERROR,
BLANCE_POWER,
RESET_POWER,
};
if the result is RESET_POWER, that reset state machine
for recovery abnormal.
-2, ignore thermal mitigation when the pps power was tuning.
Change-Id: I6c7e9defa46818baad0b87c2f8362abd3a8ddd88
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1286752
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Indicate which touch driver is reporting state change by adding
device identification. Also fix press/release statistics to support
multiple touch ASICs.
Change-Id: I74246f2ff07e468de07a31b4fa2572bd679e1512
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285326
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
we found that tty device has big impedance of headphone output.
if we report microphone, then LineOut, the headset device will
be disconnected which is handled in WireAccessoryManager.
Change-Id: If1ba3207feff9204a53d46554031faf9be9213e7
Signed-off-by: huangys <huangys@motorola.com>
Reviewed-on: https://gerrit.mot.com/1286085
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
surfNA: focaltech new ft5422u IC support
add new ft5446/5422u firmware upgrade logic
Change-Id: I91f8bd41f6ea4cc2d7cd8999e3d4e87ee8742918
Signed-off-by: hujing3 <hujing3@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1285518
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
If a battery property fails to report then send a status 0
with -EINVAL for the value. This way the error will not cause
a mass reading of files to stop as in the uevent.
Change-Id: If9b014a8346b3f307da9a88e178d456a832a1a43
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285347
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The latest drop changed the battery properties.
Change the list so that it matches qpnp-smb5.c
Change-Id: I8Montana01ccee9fcf41db33174d3ebd512c0af2ba9c
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285307
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Call the battery power_supply_changed at the end of the heartbeat.
This will; allow Userspace as well as loggers to catch changes done
during each run.
Change-Id: Ic3b39c3639c7Montana32e319acebfb9c59cc4760062
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285306
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Register multiple devices within touchscreen class to allow firmware
upgrade script to scan through them all.
Change-Id: I2103aa5f640a613cc2d79c4f30254251119cf308
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1284313
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Adding check if product line already includes v7 suffix to the original
commit
Mot-CRs-fixed: (CR)
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Change-Id: I4e53000e4deaeba502eecef86063b767fe109f99
Reviewed-on: https://gerrit.mot.com/1284337
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Olson factory SW runs headset test over SLIMBus Rx5 on tinymix interface
but kernel driver can't control Cirrus SE module correctly since Rx port
is different with default case, which is SLIMBus Rx1.
As long as factory SW uses tinymix instead of AudioHAL interface, factory
should switch Rx port to control Cirrus SE module correctly.
Change-Id: I71111f30abc58d45ae8bcd4d0398b2e9dfa71d5b
Signed-off-by: Yoon (Seungyoon) Lee <w22905@motorola.com>
Reviewed-on: https://gerrit.mot.com/1284255
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
RMI device is utilized to connect to Design Studio tool. Original
rmidev code did not support multiple instances running concurrently.
This commit adds this feature
Change-Id: Iaada97a065b4516bc40240f3d1bf2faadec673cd
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1283410
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
