Original change made to fwu_read_flash_status and fwu_wait_for_idle
functions unexpectedly created incompatibility with older BL
versions. This commit restores compatibility with BL version
6 and older.
Change-Id: I30d20fa6acd3352dd01ec3ac7b681297a046d699
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306274
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
User an orderly shutdown for factory kill instead of a
kernel power off. The orderly shutdown will attempt to
call the reboot binary from userspace first, and then
fallback to kernel power off if it fails.
Change-Id: I38fc885547b31231fc30eb6bce7163f4e3dd0a24
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306845
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Remove power_supply_unregister calls on shutdown. The power
supplies use devm register so it should not be needed.
This resolves warnings about reference counts on factory kill
and a potential race condition with power_supply_changed.
Change-Id: I86e78d9b685ba162fb5e5492c4f017227f287e3d
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1306182
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Ling Jin <lingjin@motorola.com>
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Fix the following user build error:
/motorola/kernel/modules/drivers/mmi_muc_uart/mmi_uart.c: In function
'mmi_uart_close':
/motorola/kernel/modules/drivers/mmi_muc_uart/mmi_uart.c:416:6: warning:
'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
error, forbidden warning: mmi_uart.c:416
make[2]: *** [../../motorola/kernel/modules/drivers/mmi_muc_uart/
mmi_uart.o] Error 1
Change-Id: I156ea7cabddb21092c7dc024c28caa7066450d14
Reviewed-on: https://gerrit.mot.com/1306327
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Fix for smart amplifier silicon errata that creates non-deterministic
PLL phase lock with relation to word clock resulting in erroneous
signal output timing. This is the root cause of high-rate AoU falsing.
PROPAGATED_From: (CR)
Change-Id: I292310ba06d90b0e927dd7c60c347078d9b04186
Signed-off-by: Yoon (Seungyoon) Lee <w22905@motorola.com>
Reviewed-on: https://gerrit.mot.com/1269866
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1302826
Due to integrated circuit limitation,
use firmware to control GLOBAL_EN register bit
based on received GPI input.
If enabled, firmware, upon receiving GPI value,
will control GLOBAL_EN register bit accordingly.
Cirrus-JIRA-fixed: MMI-942, MMI-953
PROPAGATED_From: (CR)
Mot-CRs-fixed: (CR)
Change-Id: Ied87df36bf3f3914b419d472df7d095e8b1a2fbf
Signed-off-by: Li Xu <li.xu@cirrus.com>
Reviewed-on: https://gerrit.mot.com/1269398
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Patrick Gries <patgries@motorola.com>
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1302827
Record the muc fw vers when it is sent from the muc
and provide access to it from an attribute.
Change-Id: Ibbee1cf8c7c6ef7a6d936e8d08ff198d0d963d75
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1303136
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The Reverse has been shown to also get stuck with VBUS above VBATT
The first check for the Reverse Boost fix was that VBATT > VBUS
so in this case it was not tripping. Fix this by using a 100 mV
window to decide if VBUS and VBATT are close enough independent
of which one is greater.
Change-Id: I091e5aedd8a819fd7174d92907d252709a03b78f
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302801
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Add message type for debug messages from the muc.
Print the payload to dmesg when it arrives.
Change-Id: I133609c9ff678ed385ab8ff773648a635a24c178
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302761
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Recalibrate the capsensor when the extcon
flip device is changed.
Requires an extcon parameter in the device
tree node.
Change-Id: I7a7408a064620fdd67a55a7f2f877d4a3542bf00
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1290732
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Test reporting module creates subfolder that isn't associated with any
device. This commit defines kobject sysfs_ops to apply custom attribute
structure containing pointer to RMI4 data to all F54 show/store
methods. Config registers structures now dynamically allocated
individually for each driver's instance that allows full use of
config modifiers.
Change-Id: I103b64df418084dc8e713f643c0078256d9c79d4
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1297200
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
MMI Synaptics driver now is capable of supporting test reports while
running multiple instances of the driver. Test reports used in factory
and an important part of Ghostbusters app.
Change-Id: I02a9d8b1151f810b90f83e02ec0d302755a15be5
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1295407
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
If there are some touch event not release before IC go to suspend.
Driver helps to report up events before suspend.
Change-Id: I02f43e42e65b93d555fedc6bead2c5959193f6ce
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1302438
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
There is a race between the muc triggering a
wake event and uart init completion.
When the wake event wins errors such as "no tty"
will be seen. Fix this by starting the uart
module before registering the wake interrupt
handler.
Also moves the ldisc (rx callback) for the uart
module to after the "set ready" so we don't
start processing rx messages before we can
send a response.
Change-Id: I83380eabfd7aa4dfb8b3fac7fb7c4d4718ef8034
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1297199
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Access to packet registers was not supported in driver running
multiple instances. This commit provides a fix and allows
config modifiers to become re-enabled.
Change-Id: I20907f5d5c94fa724dbac7412bdfe31c0038a925
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1293968
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
add dts param to make different power off behavior
by the new dts param.
Change-Id: Ida804b5fa445f08592a8972125a6326088a3ce06
Reviewed-on: https://gerrit.mot.com/1291485
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
In exfat_find_dir_entry, if there doesn't have a TYPE_STREAM(0xc0) entry
before TYPE_EXTEND(0xc1), it will cause kernel panic for the kernel poniter
uniname accessing invalid address
Propogated from OMR1.
Change-Id: Ic8063eafc1c458c96c18a96d58dacd8f33695bb2
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1235768
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yue Sun <sunyue5@lenovo.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Signed-off-by: yuedl1 <yuedl1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1290985
Reviewed-by: Shi-Yong Li <a22381@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Change drv2624 haptic gpio request mathod from
gpio_request to devm_gpio_request_one.
This can make it easy to deal with the compatibility
with other haptic driver IC.
Change-Id: Iccdb31ab8718e442499cd1c7a27d26b78cd9a521
Signed-off-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1287075
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wen Xie <xiewen3@motorola.com>
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Without wakelock, i2c would suspend when vibration is on going, which
may cause the STOP command failed to be sent and in turn leave the phone
vibrating for a long time.
Change-Id: I821ef7deb848fd6376102885cfef2deb58741fcf
Signed-off-by: yangjq <yangjq@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1287662
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
-1, define PD reponds result
enum mmi_pd_pps_result {
NO_ERROR,
BLANCE_POWER,
RESET_POWER,
};
if the result is RESET_POWER, that reset state machine
for recovery abnormal.
-2, ignore thermal mitigation when the pps power was tuning.
Change-Id: I6c7e9defa46818baad0b87c2f8362abd3a8ddd88
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1286752
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Indicate which touch driver is reporting state change by adding
device identification. Also fix press/release statistics to support
multiple touch ASICs.
Change-Id: I74246f2ff07e468de07a31b4fa2572bd679e1512
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285326
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
we found that tty device has big impedance of headphone output.
if we report microphone, then LineOut, the headset device will
be disconnected which is handled in WireAccessoryManager.
Change-Id: If1ba3207feff9204a53d46554031faf9be9213e7
Signed-off-by: huangys <huangys@motorola.com>
Reviewed-on: https://gerrit.mot.com/1286085
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
surfNA: focaltech new ft5422u IC support
add new ft5446/5422u firmware upgrade logic
Change-Id: I91f8bd41f6ea4cc2d7cd8999e3d4e87ee8742918
Signed-off-by: hujing3 <hujing3@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1285518
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
If a battery property fails to report then send a status 0
with -EINVAL for the value. This way the error will not cause
a mass reading of files to stop as in the uevent.
Change-Id: If9b014a8346b3f307da9a88e178d456a832a1a43
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285347
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The latest drop changed the battery properties.
Change the list so that it matches qpnp-smb5.c
Change-Id: I8Montana01ccee9fcf41db33174d3ebd512c0af2ba9c
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285307
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Call the battery power_supply_changed at the end of the heartbeat.
This will; allow Userspace as well as loggers to catch changes done
during each run.
Change-Id: Ic3b39c3639c7Montana32e319acebfb9c59cc4760062
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285306
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Register multiple devices within touchscreen class to allow firmware
upgrade script to scan through them all.
Change-Id: I2103aa5f640a613cc2d79c4f30254251119cf308
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1284313
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Adding check if product line already includes v7 suffix to the original
commit
Mot-CRs-fixed: (CR)
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Change-Id: I4e53000e4deaeba502eecef86063b767fe109f99
Reviewed-on: https://gerrit.mot.com/1284337
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Olson factory SW runs headset test over SLIMBus Rx5 on tinymix interface
but kernel driver can't control Cirrus SE module correctly since Rx port
is different with default case, which is SLIMBus Rx1.
As long as factory SW uses tinymix instead of AudioHAL interface, factory
should switch Rx port to control Cirrus SE module correctly.
Change-Id: I71111f30abc58d45ae8bcd4d0398b2e9dfa71d5b
Signed-off-by: Yoon (Seungyoon) Lee <w22905@motorola.com>
Reviewed-on: https://gerrit.mot.com/1284255
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
RMI device is utilized to connect to Design Studio tool. Original
rmidev code did not support multiple instances running concurrently.
This commit adds this feature
Change-Id: Iaada97a065b4516bc40240f3d1bf2faadec673cd
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1283410
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add the Trustonic TEE driver module to the kernel. This is needed
to run trusted applications in the Trustonic TEE.
Change-Id: I24cf50b78f7dc1bb4085ba2cd979966e45957a79
Signed-off-by: Balachandar Swami <w60013@motorola.com>
Reviewed-on: https://gerrit.mot.com/1270005
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Add usb control message handling from the muc. The
message will set the online power supply property.
Additionally, setting the online property will send
a usb control message back to the muc with the set
value.
Change-Id: If7ef2eecbf862cbad15fb339e52a8f8c30c4ae2a
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1279106
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Reviewed-by: Curtis Porter <porterc@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
When a channel for the capsensor is turned on,
enable sensing only on that specific channel.
Same for disable.
Previously, all channels were enabled when a single
channel was set to enable, and all channels were
turned off after every channel was disabled.
Enabling only the channels we need will reduce
scan time and increase performance.
Change-Id: I77e11b1a66b3cbcfbfdbb9752faecb53dd6a3ea7
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1269356
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guoyue Liu <liugy11@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Minimum changes were performed on this variable defines, in order to
correct typos, as well as to avoid magic numbers.
Change-Id: I3a94183f2cf28344d464cd4bea319a4897151e80
Reviewed-on: https://gerrit.mot.com/1275094
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
TCMD needs to check the connectivity of the CDC_LP_GATE line by reading GPIO1 status,
and CS35L41_GPIO_STATUS1 indicates the status of GPIO1.
Change-Id: I4a563cc228a455f9995fc92bfcf4b11cdfd6136b
Reviewed-on: https://gerrit.mot.com/1274600
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
