Add debug clock controller to support measure functionality for all
clock controllers.
Change-Id: I4fde3ad197220264329126ca788aa70a7c75bcb7
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
Add the display clock controller to support display port
related branches, PLLs and RCGs.
Change-Id: I3f366c3880823199ed4cd34bb9e608baf804e1bc
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
Etr_buf will be NULL when disable etr hw. It is before stopping byte-cntr
and sw usb data transfer which may cause null pointer issue. Use sysfs_buf
to avoid this issue.
Change-Id: I5967fd4183a9f36fca22059bb08fd8d357c8e5af
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
Add support for pm ops for Camera, Graphics and Video clock
controllers.
Change-Id: Ic9c01a35385a8c24899b66c9652810135bc42ac7
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
When registering the QMI server during initialization there is
a chance that the handle creation can fail with -EPROBE_DEFER if
the IPC router service isn't ready yet. In that case, we should
not fail the module_init call as that results in the module
getting unloaded with no automatic mechanism to reload it (a la
driver probe deferral). Instead, move the uaudio_qmi_svc_init()
call to beginning of uaudio_qmi_plat_probe() so that in case it
defers the probe can be retried again later.
Change-Id: I07a1e2cee5194387884cb716e95ed7c414a22159
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Copy the entire userspace request buffer to local kernel
buffer and use that to send to TZ. Update the response
received in the local buffer to the actual userspace buffer
after the request is complete.
Change-Id: I673d74a32966816c5248778fc967eb91da5b6df5
Signed-off-by: Anmolpreet Kaur <anmolpre@codeaurora.org>
ARM cannot natively read 64-bit address. As such the readq_ variants
are not defined for this architecture. Add a 32-bit equivalent to read 2
sequential 4-byte memory into a u64 value. Let's keep them locally
defined for now, since they are not native to the ARM architecture.
Change-Id: Ib0ce08c3b8a37af85c12c2ad72803bf871847f67
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
Update the gpll configuration values for GCC and GPUCC
and halt check for camera and video ahb clks for GCC
in HOLI.
Change-Id: I637b05f0ecc877a2d83990532b34462de28069de
Signed-off-by: Saurabh Sahu <sausah@codeaurora.org>
Update the master and slave ID constants for Holi interconnect
providers which consumers can use to set bandwidth constraints
and find paths in the NoC (Network-On-Chip) topology.
Change-Id: I45b73970484220af09d9ab55062da197038a82cd
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Previously, uic_cmd->cmd_active is cleared after completion has been raised
so that we can tell completion timeout happened due to kernel scheduling,
which is for debugging purposes. It is more important, however, to increase
the chance that UIC cmd survives from a completion timeout. So, this change
clears uic_cmd->cmd_active before calling complete().
Change-Id: I99254ac4e3b16dc6b905b5ed5248d53f9c9fc3af
Signed-off-by: Can Guo <cang@codeaurora.org>
Remove support for GPUCC CX APB clock and DISPCC crypto clocks.
Change-Id: I6156a19b4113543ce4d8987004aa800957a33e34
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
CONFIG_INTERCONNECT_TEST should be enabled in all config variants. The
interconnect-test debugfs files are required for debugging and
performance testing. It's set to CONFIG_INTERCONNECT_TEST=m in
lahaina_GKI.config, which should normally enable it for all variants.
But it's being unset in the lahaina_QGKI.config fragment. Remove this
override.
Change-Id: Idb15044902cf804f1b4c27029b0f40335adc42ac
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
The commit <a0a9abc9fc> (pil: Fix minidump collection during
SSR) failed to set the value of 'ret' in pil_do_minidump() upon
the return failure from prepare_minidump_segments(). As a result,
the 'goto seg_mapping_fail' will end up returning uninitialized
value. Hence, assign an error code explicitly to avoid this situation.
Change-Id: I20f0d2c4fd006483c73541937025ed50b265e2b4
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
Restore the generic system heap implementation such that it does not have
any MSM specific additions as of android11-5.4
commit a9a13eeea9 ("Merge 5.4.45 into android-5.4-stable").
Change-Id: Iedc33377d5fa64513d43459d305ff98ce2091a61
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Add support to configure bus dcvs sampling interval through the
sysfs entry. Also expose cur_ab vote value to sysfs.
$ echo 25000 > /sys/class/devfreq/soc:qcom,kgsl-busmon/sampling_interval
$ cat /sys/class/devfreq/soc:qcom,kgsl-busmon/cur_ab .
Change-Id: I77df55de2766d3fd818c27f717cfc4ae598bb0bd
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Remove the support for sending event notifications via
event_notify as there are no users of it. Update the
ABI snapshot accordingly.
Change-Id: I22f28339ed1e834ae0dbd762562a52a158c12406
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
In preparation for restoring the GKI system heap, move the existing
system heap into the vendor heap space, leaving the GKI system heap
ID slot empty. For now, alias allocations targeted at ION_HEAP_SYSTEM to
ION_SYSTEM_HEAP_ID until all clients have migrated. Once that
happens, we can remove the aliasing.
Change-Id: Ib1bd74c2a54ebfdcb14da2b04f237ae1b88db189
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
