the mipi clock is changed to 752M.
The time of ui is also changed.
So we must change MIPI timing
Change-Id: Ia262d8e479be35180a5c0c90653ab9f54ef5bf8e
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1990280
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Submit-Approved: Jira Key
The first panel(tianma), the mipi clock is 754M.
And the max frequency of mipi clock is 752
Change-Id: I4ccfc08927ea9b66d8eb8b543c175cadfb4479a3
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1990275
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Submit-Approved: Jira Key
I2c_7 bus keep hung since Qcom's rebase change gpio 27/28
as qup11_f1 but do not change it on dts node at the same time.
change the i2c_7 pin function configuration to fixed it.
Change-Id: I10c85f6ccb44ac997751cc47b2d7f58a7800cd39
Signed-off-by: wuwl10 <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1985493
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
arm/dt:
Pull qupv3_se10 i2c pins up when i2c free, slove sar access fail issue.
If uefi calls i2c_open, this i2c pins will pull down when free, so pull
pins up force when free.
Change-Id: I7a8313e02b4df7600b56e4cb3d264df701d260e7
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1985267
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
modify dtsi for front camera.
cypfg main dts has included it.
Change-Id: Id7d1a21d4c7e897bc2c307cf0368a7f80f0febd6
Reviewed-on: https://gerrit.mot.com/1973645
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Liu <liuwang2@lenovo.com>
Reviewed-by: Qiang Guo <guoq8@motorola.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Jian Zhang <zhangjo@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
arm/dt:
Set L9E voltage level to 3V to meet touch hardware spec.
corfup does not support sd card, L9E is assigned to touch.
But if remove sdhc2 dtsi, cause kernel panic. So change sdhc2
L9E settings.
Change-Id: I1bd61a685aec2fd4b8c56d2b4dcfb9a9ad434b5a
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1954838
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xinmin Fu <fuxm1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For CPYFG's designation, google key is defined at gpio11.
So we wil add it as gpio-key.
Change-Id: I7b84423c6a4ab0b1611ad2e6adb2cbb2dd4d7007
Reviewed-on: https://gerrit.mot.com/1951662
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiaofeng Wang <wangxf14@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
The panel of cypfg is different with denver.
So we remove it to avoid the compile failed.
Change-Id: I78165fece58403e81c5d46ef7e6852a003a94d53
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1952429
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Tested-by: Jira Key
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
For cypfg evt ,power up panel with pm6150L.
But we will remove pm6150L at DVT.
Change-Id: Ia2e9f0475bfbfa8b7b37b507383b909577a467d7
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1951950
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Submit-Approved: Jira Key
Accoding to HPM requirement, we should revert the latest pattern
and roll back to legacy pattern.
This reverts commit 4040c33d07d764a046fb6d3bc95a7e86a7fd3678.
Change-Id: I9974fa83d3ec1f330db42714e861ada3c49f1e00
Reviewed-on: https://gerrit.mot.com/1944107
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
According to the bootloader SME suggestion, we use 9100(EVB1) for
EVB init configuration.
Change-Id: I8e02faf8d71ef7a08a1b988ca9fbe2e81384fed4
Signed-off-by: wangxf14 <wangxf14@motorola.com>
Reviewed-on: https://gerrit.mot.com/1943242
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
device name "cyprus" was already used by ODM1 project.
So need change device name from cyprus to cypfg for Cyprus 5G project.
Change-Id: I7cf0748b2ecd8e03f519b672a2e1e11649800007
Reviewed-on: https://gerrit.mot.com/1940612
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiaojun Ji <jixj@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
wl2866d ldo3 is used for LCD AVDD, set it always on to avoid
LCD power off after boot.
Change-Id: Icaff73785f316b477362a40e6b1cb7214f078040
Signed-off-by: wangdw10 <wangdw10@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1933323
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Bolei Shang <shangbl1@lenovo.com>
Reviewed-by: Zhilong Wang <wangzl30@motorola.com>
Reviewed-by: Darong Huang <huangdra@motorola.com>
Reviewed-by: Jian Zhang <zhangjo@motorola.com>
Reviewed-by: Zhuoran Xu <xuzr3@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
HW design to change this PIN to GND default, so no need control
cs pin for SW side.
Change-Id: Iac1f74b624d733f36e94e38ff1d95fd087c6bcc4
Signed-off-by: wangdw10 <wangdw10@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1931934
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Darong Huang <huangdra@motorola.com>
Reviewed-by: Xu Ji <jixu@motorola.com>
Reviewed-by: Zilong Zhang <zhangzl7@lenovo.com>
Reviewed-by: Jian Zhang <zhangjo@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
arm/dt:
Delete gpio 38 from panel dtsi, otherwise cause camera crash,
because gpio 38 is used by camera on corfup.
Change-Id: I5a30dcad18b89beb3d19023052bdfc2bfbc4db39
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1931865
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
