EUD HUB functionality is relevant into USB device mode only. Hence when
using USB host mode, continue performing reset and initialization
functionality with HSPHY even though EUD is enable. If EUD is enable
while starting host mode, re-enable EUD whie exiting host mode.
Change-Id: Ifc2a105d8a02511dd2fc58be5fbc788d46546ba0
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Currently usb speed override functionality doesn't work as expected
when usb role switch based notification is used. Hence move usb speed
override functionality out side edev check within dwc3_resume_work()
API. Also update maximum_speed as max hw supported speed out side
edev check.
Change-Id: I69b066721490277b77333d2caf820b6c87703501
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
cpu_isolated_mask can only be used when SCHED_WALT is enabled. The
addition of the cpu_isolated_mask causes ABI to break. Thus, compile
references to cpu_isolated_mask only when SCHED_WALT is enabled.
Change-Id: I0982f6431abca807168dbabc4aca74771819565c
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
The FORCE_MEM_CORE_ON bits default to 0 and this is fine for most use
cases. However, USB needs FORCE_MEM_CORE_ON=1 to properly retain its
memories when USB APM switches from CX to MX. This can't just be a
one-time setting since the FORCE_MEM_CORE_ON bits need to be set/cleared
upon USB cable connect/disconnect for power optimization. Add fake
clocks to allow the USB client to control them.
Change-Id: Ic7aac944feaa6a956a8892e0cf1f4dd465659302
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Add clock bindings to control the USB FORCE_MEM_CORE_ON bits.
Change-Id: I406e98e1be5b4d6702636c3bfdf738ae9ff12198
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
VA bits of 48 gives more virtual address space for virtual machine.
This much of virtual space is not required for virtual machine.
Configure less virtual address that is of 39 bits.
Change-Id: Iac343d8c6dd1667abfedc1613aaa4f517008ac83
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
FM app is using the VIDIOC DQBUF ioctl to read the
event from rtc6226 driver. VIDIOC DQBUF ioctl needs
the v4l2buf type as V4L2_BUF_TYPE_PRIVATE and it
is Deprecated and not recommend to use in latest
kernel version.Also upstream kernel code doesn't
have the VIDIOC DQBUF as a valid ioctl.
Implement file read functionality to read the events
from rtc6226 driver.
CRs-Fixed: 2702667
Change-Id: I747411e362e319ff8f45e9005e0c677eeef854dc
Signed-off-by: himta ram <hram@codeaurora.org>
When the user strobes a flash LED device with a timeout of 0, configure
the safety timer with default timeout to avoid turning flash ON for
long duration. Also clear different parameters of flash/torch device
like current, timeout when the device is disabled.
Change units of min, max, step of flash timeout to micro seconds as
flash LED class expects in micro seconds.
Change-Id: I780fb2639a1beda38e391e1e0818176f147175ef
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
AMOLED ECM (Embedded Current Measurement) is a method to measure OLED
display power consumption with a time granularity in sub-frame or
multiple frames of image data. ECM can be for a short period or for a
longer period.
Change-Id: I7ea0b7d8d5961ec015c5a79ee2037ff36329f775
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
Add changes to track and predict next rescheduling ipi
based on past history. Add a module param to control enabling
it.
Change-Id: Ie495d8906288ee410708693ee15ed51643aefb44
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
TTP render mode is used to enable TTP module
in DSP. Add macro for TTP render mode.
Change-Id: I6afb3cf3e5169603b1befec69807d80fb028b437
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Current mmap and munmap use same mutex but munmap_fd does not
use the same. This can introduce race condition between mmap
and munmap_fd. Also there is a use after free scenario in get_args
and init_process as only mmap_create is protected and the map can
be freed after this. Unifying mutex to avoid race condition.
Restricting munmap_fd only for persist bufs to avoid this.
Change-Id: I2adf631b1e61c2274a14a3645a5e555f5d248645
Acked-by: Ekansh Gupta <ekangupt@qti.qualcomm.com>
Signed-off-by: Mohammed Nayeem Ur Rahman <mohara@codeaurora.org>
Define camera OPE cpas path definitions to be used in
device tree and driver for bandwidth consolidation.
Change-Id: Iedc8157c1ac999999152588acdab44fecc7f1aeb
Signed-off-by: Suresh Vankadara <svankada@codeaurora.org>
Create specific structures to hold all WALT related parameters used in the
scheduler.
This is to separate WALT functionality from scheduler code for GKI
purposes.
Change-Id: I6013883c00f2089dba3e5d0890c9abf5f57b3da6
Signed-off-by: Sai Harshini Nimmala <snimmala@codeaurora.org>
Consolidate WALT variables present in the
task_struct in a separate WALT specific datatype.
Change-Id: I6efd71d9f8cfeeb4d1417a6cdcac6cbda2175999
Signed-off-by: Sai Harshini Nimmala <snimmala@codeaurora.org>
Minor cleanup involving the cpu_util_freq_walt/pelt function to help
simplify consolidation of WALT parameters for GKI.
Currently, we have a cpu_util_freq function that calls cpu_util in non-WALT
cases and cpu_util_freq_walt with an additional parameter for WALT cases.
The additional parameter is a WALT related structure. This change removes
the dependency of a non-WALT function on a WALT parameter.
Change-Id: Id2fa2b36abcd019c902b530304e58f85b1c70234
Signed-off-by: Sai Harshini Nimmala <snimmala@codeaurora.org>
UCHE dual command queue configuration is resulting in a GPU hang.
Set UCHE_CMDQ_CONFIG to disable dual command queue.
Change-Id: I67daf5cbda1c170c5658c1e2308b8c0fd00540d6
Signed-off-by: Raghu Ananya Arabolu <rarabolu@codeaurora.org>
Keep a reference to the sdhc host instance to retrieve all the
necessary data structures in case of a crash for debugging.
Change-Id: I151b160ffbd6a02edea022ae7b970241dedce031
Signed-off-by: Bao D. Nguyen <nguyenb@codeaurora.org>
When cold boot calibration is enabled, it is the first step in
WLAN initialization. Cold boot calibration is started post file
system mount from init.target.rc and wlan driver is
loaded after that.
This update is to reject wlan driver register if it is loaded
before cold boot calibration is complete. This ensures WLAN
init sequence triggered from init.target.rc is followed and wlan
driver load from early boot is rejected.
Change-Id: Id2d7b6f9ceed0d6d648012ad6d0c24bba4d09854
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
