Use force voter for factory FCC and ICL configuration during
factory test in case the configuration is overridden by SMB5
charger driver.
Mot-CRs-fixed: (CR)
Change-Id: I8647b42b6ca420a02312198fb56c7ee09edfbde3
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1345281
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1355881
The heartbeat_work breaks and output error log when accesses
the DCIN status register for presence detection.
As the DCIN is not supported in PMI632 chip and the address
at 0x14XX is undefined, so it return -ENODEV when access it.
So for PMI632 chip, just consider it as successful with data
0 returned for DCIN presence check.
Mot-CRs-fixed: (CR)
Change-Id: Id459296ec20bb679e1803b820be1bd288a1cdc75
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1342040
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1355879
When the System Suspends the running last reported SOC needs to
be reset. The reason is that the SOC could have moved a large
amount while sleeping. The curretn SOC needs to be recalculated
so that the changes is noticable to the User upon wakeup.
To do this keep track of the Suspend state as well as the fact
that the heartbeat has not run yet after a Suspend. The
WAS_SUSPEND bit will track this and then be cleared once the
heartbeat gets past the point that the information is not longer
needed. For Dual Batteries, this will force the last_reported_soc
to be updated with the current calculation rather then trying
to Monotonically adjust it slowly.
Change-Id: I0de830df74720f0f26f8f7a7cfcba7698f6a6dd6
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1355819
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Curtis Porter <porterc@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
root cause:
incorrect NXP AMPE reg value when power on
fix:
if AMPE==0 and PWDN ==0, force set AMPE value to 1
Change-Id: Ib7605261b76cac3238b5fa23a7d74a091f0b5ffd
Signed-off-by: guoyf2 <guoyf2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1356869
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yunfei Guo <guoyf2@motorola.com>
Reviewed-by: Zhengming Yao <yaozm1@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add a kcontorl for the Noise Generator sample rate select.
Patch came from vendor (Cirrus).
Mot-CRs-fixed: (CR): approach won't work with youtube in background
Change-Id: If4dc2ec707e679da23e31740bf071d3e1f7d311a
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
SLTApproved: Slta Waiver
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1354957
Change the device id of a part to the device name.
Patch came from vendor (Cirrus).
Mot-CRs-fixed: (CR): approach won't work with youtube in background
Change-Id: I6ca0f03da34bffe4025b49d5e1913b03c4b9a70e
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Tested-by: Jira Key
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1354956
Change the dsp firmware control to switch AoU and AoU concurrent
firmware.
Patch came from vendor (Cirrus).
Mot-CRs-fixed: (CR): approach won't work with youtube in background
Change-Id: I8822e02f8b4aa229dee187c89297f43e4c111e0f
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Tested-by: Jira Key
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1354954
Add enum to select the rate for the Noise Generator.
Patch came from vendor (Cirrus).
Mot-CRs-fixed: (CR): approach won't work with youtube in background
Change-Id: I056bc0eb204d5f3feef61ee7066cc5b4c59427a6
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1354953
At power-up the USB should be suspended for 50 ms to clear
any issues that might have occurred during boot. This will
be handled in the probe when NOT in factory mode. Stability
racks are reporting discharged batteries and the cause appears
to be ICL is at minimum before probe occurs. This should allow
for a clean start on each boot.
Change-Id: I66817f5a74f8161fbf1c3023c42ae72e994d8fa2
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1349801
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Curtis Porter <porterc@motorola.com>
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Always log touch events while running in factory mode. This will
allow for easier debugging of factory issues.
Change-Id: I348164021d590e40751ba3c456245c3349a4d53a
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1347015
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
When FW upgrade happens, regmap might change. This makes access
to test reporting invalid and thus DLKM needs to reload. However,
if touch IC's power state does not allow successful I2C
communications, DLKM will never properly initialize. This change
introdices 2 things:
* waiting for valid power state to load DLKM
* new state "loading" that allows to hold on power state change
during DLKM load
Note: It has been evaluated for test reporting DLKM only at this
time. Long term it would need to apply to all DLKMs.
Change-Id: I86f1ab6b815053e499b01a655fccf517d1e9addc
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1346820
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
- send tfa cal just on speaker mode.
if set tfa cal on handset mode, algorithm no ready,
afe_callback will return fail
and set this_afe.status to 1,
once other modules want to get the status at the same time,
will get the fail status.
the call on handset screne,
open capture pcm low probality to get the status
at the same time, so open capture pcm fail,cause call no sound.
so send tfa cal just on speaker mode.
nxp smart pa is bypass on handset mode.
Change-Id: Ib977fc68d48931d8617ec4339dc5494da9986ca4
Signed-off-by: liaohj <liaohj@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1339597
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wanlong Zhou <zhouwl@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Demo Mode was a pending feature on MOD 5G and Olson. This patch
allows it to work on both devices, as well as being compatible with
any other device that uses this same driver.
Change-Id: I99f117485faf27a01890c6433a6ece77ab755cfd
Signed-off-by: cmsantos <cmsantos@motorola.com>
Reviewed-on: https://gerrit.mot.com/1281220
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The DC ICL needs to be set via the DTS entry. Also the Charge
current when the source is DC should be lower so use a default
500 mA rate.
Change-Id: I7f04e1601b657cf3a4ff58614b309426026c150a
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1337904
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
In the constant current charging stage, we made a power compensation
strategy to improve the charging efficiency.
this patch is for optimize the power compensation strategy, so that
it can avoid the disturbance of thermal mitigation policy.
and it can help improve the accuracy of the battery fuel gauge
Change-Id: I404f63da75c93ca409b6bb5c7d581f62ba415f6c
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1336218
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
State machine needed to indicate DRM panel states. This fixes
unloading of DLKM.
Change-Id: I8093337c3890f8e76dd4b3b7290cc8e311d245d1
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1330943
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Added missing conditions to discover F54 control registers up to
F54_ANALOG_Ctrl269 BSC calibration. There are still few gaps, but
even the latest RMI4 specification provides no info on how they
could be discovered. Tested on s7813 and s3601 touch ICs.
Change-Id: I0995ea7bb2a1a24766cc8ce250b65582a99db73e
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1326957
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Driver contains performance improvement algorithm allowing to avoid
unnecessary page selection transactions by "remembering" the last
accessed page. However, mixed types of communications used in
factory "breaks" this algorithm and causes access to a wrong page.
This change allows to enforce page selection in certain functions
used by factory.
Change-Id: I72c0bf76a3428234645103404372455b42356ae1
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1326865
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add a check against both batteries in a dual configuration
for a low voltage condition. This will drive the SOC to 0% so that
the System Voltage does not get too low.
Change-Id: I70353eeef6b12b25e2d48b181efe00327d1dedb1
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1322360
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Count the Cycles in the battery so that tracking can be done.
This will help with adjusting charge parameters as cycles
increase.
Change-Id: I737ff91f71f41e671e785a7cef370586fcedb7f0
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1322359
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The Initialization of some undocuemnted registers is wrong.
Fix this so that the correct encoding and conversions are used.
The latest maxim supplied spec sheets state that 0x46 should be 0xC80
and that 0x45 should be 1/16th of FullCapNom. Also it seems that
it should be 1/16th of the Register FullCapNom not the actual mAh.
To do this the Rsense conversion will be applied prior to writing.
Change-Id: Ica801e4f57e7070c4b56b87cd45f607b40ea5530
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1322357
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Reviewed-by: Curtis Porter <porterc@motorola.com>
Submit-Approved: Jira Key
Add the POWER_SUPPLY_CHARGE_NOW property to the power supply
and report RepCap. This will allow easier tracking of the
FCC calculation being done in the driver.
Change-Id: I9299ed0430308651578d943fe7379bbe62de6b38
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1321620
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Curtis Porter <porterc@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
If charger is inserted in factory mode disable factory mode charging
Set the Votables back to OFF (0) wen this happens so that any previous
Force to set Factory mode charging is overridden.
Change-Id: Id7b88a098d890c8705cbf03ebdec628de396d4fd
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1325224
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
BSC calibartion is a new feature required for Synaptics s7318 IC
built into AUO TP5 panel. Driver need access to F54 control
registers: 242 and 269 to fully implement BSC calibration. This
commit allows for these registers' discovery and setting up
necessary sysfs entries to access them.
Change-Id: I9a31fcbdc64930ebeedb17ab4b7e574be8048935
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1322193
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
If there is a main battery and a flip battery, return the
highest thermistor value for the batt temp instead of
defaulting to main.
Change-Id: I1eaf67a9b0dccb345a2890eadad8a835e195b5ce
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1319852
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Add a sys entry in /sys/class/fingerprint/*/vendor
This sys entry can show vender name of current installed fps..
Change-Id: I608bac2fd2dfc6eb22cb105150b502c24360503c
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1320504
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Driver code failed to unregister all resoures in probe function.
So after rmmod this kernel module, can not insmod again.
Change-Id: I481e823adc506c1666ef7095c23f99744d2a363d
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1313653
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
PDT scan assigns bl_version based on version of F34. Thus BL_V7
is assigned whenever BL version is 7 or 8. However, if we run
erase_all and then attempt reflashing firmware from the image
that belongs to BL version 8, reflash will fail. Thus we query
F34 after calling erase_all.
Change-Id: I75c8d26eb09f1dd93aea1ba1f0f5202c7736740c
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1320478
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
The basic state machine for charging incorrectly is reading
the qcom power supply instead of the bms power supply
for the charge full and charge full design. This was
preventing the age calculation from occuring.
Change-Id: I8185529d9eec016b30bdc4c43a1c63c4cb0a6870
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1317787
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The Phone Power supply which is used to denote that the
MOD is attached to a Phone had the incorrect Type.
It was set to USB and thus made Framework think that
there was a USB cable attached. Fix this by changing to
Type MAIN.
Change-Id: I145e01a6affd5c74ee46641c4c3c7c1c73618a69
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1317772
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Curtis Porter <porterc@motorola.com>
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Instead of using driver's instance number, this commit assigns input
device name based on the name of touchscreen class sysfs entry. This
allows for static input device name independent on number of
running instances. This name is controlled by
synaptics,class-entry-name device tree option and default to
primary if the option is not provided.
Change-Id: If6f6ddc895688edd2d9128d262407ea2a0c8c60b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1317273
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Due to ability to tun multiple driver instances, it makes more
sense to distinguish primary touch. Thus driver will handle a
new device tree option allowing for specifying class sysfs
entry name explicitly.
Change-Id: I3f3154db57c01f0d1ddea2df7716aadec7f48d9a
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1316818
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
There are some weird age reporting from the dual fuel gauges.
For now so that it does nto corrupt and write bad values
into units only send 100. This will allow the other layers
to test interfaces.
Change-Id: Ic2378106e2583887183b8dce74b1f95c16221e54
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1316420
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Eyob Tesfu <Eyob.Tesfu@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Create a new group and make the age parameter. This will be
added to the power supply kobject so that it shows up in that
power supply's sysfs directory.
Change-Id: I95cc23242df5bd7096d0b4e554e31647e46ce3a4
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1315612
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Eyob Tesfu <Eyob.Tesfu@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
This message adds the Charge Rate message. To add this message
a new group had to be created for the battery power supply
kobject. Then so that the uevent propagates the new message
a new version of power_supply_changed had to be added this driver
so taht kobject_uevent_env could be called with the new
information.
While this was being done the other paramater that is missing,
age, was also added. It calculates the age from either the
single battery or both if it is a dual configuration.
The choice of using the lowest between the 2 in a dual
battery configuration was taken and seems the best to force
replacement of both batteries at service time.
Change-Id: Ifc34dfca3602bce042a2545a15914b1421198942
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1315611
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Eyob Tesfu <Eyob.Tesfu@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Flag splash screen mode was introduced to to work around
deficiencies in DRM framework found on early stages of development.
Once DRM matured, flag becomes unnecessary. Removing this flag
revealed a bug in the logic. This commit is fixing it.
Change-Id: I0f8310f79732e675e6be7f5e373e6b2f07765e0c
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1316335
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
On Some units battery capacity and MONOTONIC_SOC values seems
to be less than the reported capacity. In this case reported
capacity will not get updated until the unit is rebooted.
Change-Id: Ibfcaf31509e4e0d987e620f9896b66a70544689d
Reviewed-on: https://gerrit.mot.com/1315042
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
On PCB level driver should not attempt loading modules. Bare board
detection using DRM framework is based on reported panel name. Main
panel will report dummy name while CLI will report an empty name.
Driver will fail probe for main and CLI touches once this condition
detected.
Change-Id: I7b54dc59287140cdf8a88f3c220ab76e6421b133
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1314565
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add a uevent to line up with the usb_ext online
and offline.
Change-Id: I6ceeeefaa03835f140e042d6c5a0e198fb35ba1c
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1294012
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jing Zhao <zhaojing@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
NXP smartPA new algorithm for 8937/8940 need to set
rpc_send delay time to 5ms.
Change-Id: I79ec1c1493f8b32f562bbc7e8a78f64e62e3ef6a
Signed-off-by: guoyf2 <guoyf2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1310382
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Reviewed-by: Yunfei Guo <guoyf2@motorola.com>
DRM framework is not sending resume event, thus recovery needs
another trigger. Then we cannot rely on touch IC reporting
flash programming mode if firmware has been wiped with erase
all (and this is the case when touch IC comes w/o any firmware
pre-flashed). Thus we load F34 handler first to ensure solid
flash mode detection.
Change-Id: I084188dec58d2dc690f5c7c7415329d0adb92bd9
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1310296
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
All show/store methods in test reporting module declared as macros.
That makes it convenient to log what resorce is being accessed and
in which way (read/write). Adding some logs to test reporting code
for debug purposes.
Change-Id: I7369604af33a767c11ae539430d92b1f02c5515a
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1312205
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
