Config bq25960_master and bq25960_slave
for miami .We will use them when android system
insmod bq25980_mmi_iio.ko.
Change-Id: I70044c7c417a527158941430e8879446b814a569
Signed-off-by: wanggc6 <wanggc6@motorola.com>
Reviewed-on: https://gerrit.mot.com/2211633
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Submit-Approved: Jira Key
Modify:
-Update the dtsi initial code for optimizing the screen glass GIP timing.
-Effection:
-It will occur the problem which the top dark line when extreme
and heavy load are encountered.
Change-Id: I3b1626106d6c801e9e23e39a83cdf70ef5a0a3fc
Reviewed-on: https://gerrit.mot.com/2212717
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- set nt36672c pwm to 11bit
- set backlight max current to 23mA
- set sm5350 default brightness to 1810 to avoid brightness change
when boot.
Change-Id: I88a23f10c751efdc2bdMontanafa0800bcfd48b6ff8d
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2207193
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- Since now touch can't support for tianma v2, add this config
and make touch can match the tianma v2 display.
Change-Id: Ia33537f30c79cc35dfa93d05160ec43d4ef5f125
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205779
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
There is no HW ILIM R in Rhode5G HW Board
Disable HW ILIM by reg BQ2589X_ENILIM_DISABLE ,
and config it w/ DTS in rhode5g charging dts
Change-Id: Ia795d4bf63ba9a69bf91842e2e4e59caee54223f
Reviewed-on: https://gerrit.mot.com/2204336
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Submit-Approved: Jira Key
details:
1."qcom,leica-used-i2c" is used for PMIC over i2c use case to skip the BW vote.
2. We rm se8 and set it just for se7 to verify the LDO used by camera.
Change-Id: I14dd200ebd64e1fdd277c581a4535998ff269472
Signed-off-by: weimh1 <weimh1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2204672
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Get the new OP manual from KP at 2022.02.23.
Add OD code for tianma nt37701 6.55 inch panel.
Change-Id: I2205db2212c54882835977afb5c941cadce5fc6b
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2199855
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
This platform don't have mmi_battery for 33W, we need change it to
battery power supply.
change max charger icl to 300ma when charger pump enable.
Change-Id: Ibbef411b53a47e305134d75217821c8d58e473df
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2200417
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lei Chen <chenl18@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
When we use external LDO for power supply, we need to add the parent
I2C device to critical devices list to keep clock on to avoid deadlock.
Change-Id: I745cdd6fbed0ef885d57b1a7775c6ef792babbed
Signed-off-by: Xiaofeng Wang <wangxf32@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2200017
Reviewed-by: Pengfei Qiao <qiaopf1@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
- Since now we don't need to support 1st tm touch panel any more,
therefore remove it.
Change-Id: I3765bf7f12437ffba06408db873acdd9f997360a
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2193954
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
patch-version: 20220212_00
1.fix The first time the battery be inserted, the power display is low
2.reduce the time of temperature update
3.enable delay-shutdowm feature to set showdown voltage to 3.4v
Change-Id: I96d88ce6e4d475a02005234f42a0f4943184bb94
Reviewed-on: https://gerrit.mot.com/2192337
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
When the OTG is connected and discharged with high power consumption,
the temperature rise exceeds 3 degrees, so it is necessary to modify
the OTG discharge current to 1.2
Change-Id: I971395e6dd8d89e5905f7527339e0066ae76ec2a
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2191032
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- Because have user feedback that the edge area is sensitive
in the landscape mode, so add support for the edge rejection
function and set different rejection areas according to the rotation
direction, which will works in the game mode.
Change-Id: Ifd0d0442899215cb7701fa7d8adc06db3bf0dd18
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2188908
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
100s update the battery that is too long.
when charging need update the battery info timely
so modify it to 5s.
Change-Id: Iea135b1874f268ba9993e4fcf4184f5783c7384c
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2188940
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
version:10
-add the temperature compensation coefficient
-the CH4 userfliter is adjusted to prevent the
desktop from being released too quickly
Change-Id: I0cda5547a0206cf522d87f0b04c16897f090090f
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2189532
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Minghui Wei <weimh1@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Modify:
-Change initial code for updating the correct code and porch to solving ili7807s panle blurred screen problem
-Change the refresh rate 60Hz to 120Hz
Change-Id: Iba3355fb665ed9e79161ae083d4a35de5cec02f2
Reviewed-on: https://gerrit.mot.com/2186672
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: panyq6 <panyq6@motorola.com>
-On the basis of version 03, adjust the scanning
frequency of all channels to minimize the bottom noise
-Adjust the threshold of ANT4 to make the antenna
meet the requirement of trigger distance
Change-Id: I5ee1f04bca28b692568afdc77d945af77098be9d
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2181282
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jiacheng Ou <oujc1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As the request of KP, OD fuction with the side effect,
remove tianma nt37701 v2 panel OD code for Rhodep
Change-Id: I527e5fb8b51b3c3c373a6126704b47b824427d53
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2178448
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
