In exfat_find_dir_entry, if there doesn't have a TYPE_STREAM(0xc0) entry
before TYPE_EXTEND(0xc1), it will cause kernel panic for the kernel poniter
uniname accessing invalid address
Propogated from OMR1.
Change-Id: Ic8063eafc1c458c96c18a96d58dacd8f33695bb2
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1235768
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yue Sun <sunyue5@lenovo.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Signed-off-by: yuedl1 <yuedl1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1290985
Reviewed-by: Shi-Yong Li <a22381@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Change drv2624 haptic gpio request mathod from
gpio_request to devm_gpio_request_one.
This can make it easy to deal with the compatibility
with other haptic driver IC.
Change-Id: Iccdb31ab8718e442499cd1c7a27d26b78cd9a521
Signed-off-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1287075
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wen Xie <xiewen3@motorola.com>
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Without wakelock, i2c would suspend when vibration is on going, which
may cause the STOP command failed to be sent and in turn leave the phone
vibrating for a long time.
Change-Id: I821ef7deb848fd6376102885cfef2deb58741fcf
Signed-off-by: yangjq <yangjq@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1287662
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
-1, define PD reponds result
enum mmi_pd_pps_result {
NO_ERROR,
BLANCE_POWER,
RESET_POWER,
};
if the result is RESET_POWER, that reset state machine
for recovery abnormal.
-2, ignore thermal mitigation when the pps power was tuning.
Change-Id: I6c7e9defa46818baad0b87c2f8362abd3a8ddd88
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1286752
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Indicate which touch driver is reporting state change by adding
device identification. Also fix press/release statistics to support
multiple touch ASICs.
Change-Id: I74246f2ff07e468de07a31b4fa2572bd679e1512
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285326
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
we found that tty device has big impedance of headphone output.
if we report microphone, then LineOut, the headset device will
be disconnected which is handled in WireAccessoryManager.
Change-Id: If1ba3207feff9204a53d46554031faf9be9213e7
Signed-off-by: huangys <huangys@motorola.com>
Reviewed-on: https://gerrit.mot.com/1286085
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
surfNA: focaltech new ft5422u IC support
add new ft5446/5422u firmware upgrade logic
Change-Id: I91f8bd41f6ea4cc2d7cd8999e3d4e87ee8742918
Signed-off-by: hujing3 <hujing3@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1285518
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
If a battery property fails to report then send a status 0
with -EINVAL for the value. This way the error will not cause
a mass reading of files to stop as in the uevent.
Change-Id: If9b014a8346b3f307da9a88e178d456a832a1a43
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285347
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The latest drop changed the battery properties.
Change the list so that it matches qpnp-smb5.c
Change-Id: I8Montana01ccee9fcf41db33174d3ebd512c0af2ba9c
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285307
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Call the battery power_supply_changed at the end of the heartbeat.
This will; allow Userspace as well as loggers to catch changes done
during each run.
Change-Id: Ic3b39c3639c7Montana32e319acebfb9c59cc4760062
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1285306
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Register multiple devices within touchscreen class to allow firmware
upgrade script to scan through them all.
Change-Id: I2103aa5f640a613cc2d79c4f30254251119cf308
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1284313
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Adding check if product line already includes v7 suffix to the original
commit
Mot-CRs-fixed: (CR)
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Change-Id: I4e53000e4deaeba502eecef86063b767fe109f99
Reviewed-on: https://gerrit.mot.com/1284337
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Olson factory SW runs headset test over SLIMBus Rx5 on tinymix interface
but kernel driver can't control Cirrus SE module correctly since Rx port
is different with default case, which is SLIMBus Rx1.
As long as factory SW uses tinymix instead of AudioHAL interface, factory
should switch Rx port to control Cirrus SE module correctly.
Change-Id: I71111f30abc58d45ae8bcd4d0398b2e9dfa71d5b
Signed-off-by: Yoon (Seungyoon) Lee <w22905@motorola.com>
Reviewed-on: https://gerrit.mot.com/1284255
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
RMI device is utilized to connect to Design Studio tool. Original
rmidev code did not support multiple instances running concurrently.
This commit adds this feature
Change-Id: Iaada97a065b4516bc40240f3d1bf2faadec673cd
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1283410
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add the Trustonic TEE driver module to the kernel. This is needed
to run trusted applications in the Trustonic TEE.
Change-Id: I24cf50b78f7dc1bb4085ba2cd979966e45957a79
Signed-off-by: Balachandar Swami <w60013@motorola.com>
Reviewed-on: https://gerrit.mot.com/1270005
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Add usb control message handling from the muc. The
message will set the online power supply property.
Additionally, setting the online property will send
a usb control message back to the muc with the set
value.
Change-Id: If7ef2eecbf862cbad15fb339e52a8f8c30c4ae2a
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1279106
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Reviewed-by: Curtis Porter <porterc@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
When a channel for the capsensor is turned on,
enable sensing only on that specific channel.
Same for disable.
Previously, all channels were enabled when a single
channel was set to enable, and all channels were
turned off after every channel was disabled.
Enabling only the channels we need will reduce
scan time and increase performance.
Change-Id: I77e11b1a66b3cbcfbfdbb9752faecb53dd6a3ea7
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1269356
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guoyue Liu <liugy11@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Minimum changes were performed on this variable defines, in order to
correct typos, as well as to avoid magic numbers.
Change-Id: I3a94183f2cf28344d464cd4bea319a4897151e80
Reviewed-on: https://gerrit.mot.com/1275094
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
TCMD needs to check the connectivity of the CDC_LP_GATE line by reading GPIO1 status,
and CS35L41_GPIO_STATUS1 indicates the status of GPIO1.
Change-Id: I4a563cc228a455f9995fc92bfcf4b11cdfd6136b
Reviewed-on: https://gerrit.mot.com/1274600
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Seungyoon Lee <yoon@motorola.com>
Submit-Approved: Jira Key
Replace character device with debugfs for reporting raw data.
Multiple instances of driver and raw data reports supported.
Source files moved to ldc2114_mmi folder to align with other
drivers.
Change-Id: I0357117962f5d492459091c28e8fe1cd403490a2
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1277626
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add the USB OTG interface so that other drivers can enable
the Output. This is only going to be used by MUC devices as
the USB PD driver will handle enabling this regulator for
actual OTG cases.
Change-Id: I3e5984e4310fc56d75b77c5a08916abfacf17eea
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1276550
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
When the MUC sends the VBUS_OUT command notify mmi_battery.
The mmi_battery will handle the Power switching.
Change-Id: I52fecb1683e7634b135a7e975588c1be849cb9c0
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1276549
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
With added ability to run multiple instances of the driver, now all
named resources should change their name to reflect what instance
allocated them. This commit fixes the bug the original code had.
Change-Id: Iad3afefcb04b503d08152365b6be81fbe642d9e3
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1276014
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
The previous commit stopped outright setting of the wake alarm.
Without that alarm, because no wake source is held with charger
present, it could be possible to sleep while charging for a period
that exceeds 60-70 secs. To fix this ensure that the alarm is set
if charger is present.
Change-Id: I50cd409694cb51452c5ca902f64a5b62b94475ca
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1275889
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
when the hp impedance is greater than 5000, we regcognize it as
lineout to instead the orginal headphone
Change-Id: I0a7843c4e8fb7db3f0d5b681210c24e15d56a59c
Signed-off-by: huangys <huangys@motorola.com>
Reviewed-on: https://gerrit.mot.com/1275817
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
update the reset ic sleep time to 100ms
as vendor defined on their common base
Change-Id: I0138620ce138fe26dfd4e3cd9d4e972602019522
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1276079
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
channel: support two tas2560 bin files
-tas2560_TI_row.bin for Channel ROW with smart pa;
-tas2560_TI_na.bin for Channel NA;
-add ti,spk_type_id to distinguish row and na bin files;
-close debug log.
Change-Id: I8ae7805db2e92c807b34f841dd1268db96ba6163
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1274052
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add a module parameter to control whether we allow the suspend
wakeup alarm to be configured in the heartbeat. This will allow
testing of the feature in case it is needed.
Change-Id: I3f3d0928289362e597c7cc3f20dbe529df4f62cd
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1275055
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Set the value to variable state before it is used.
Change-Id: I240b754483a1d36fadb6759e5c223472d7909cf3
Reviewed-on: https://gerrit.mot.com/1271405
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Andrew Wheeler <awheeler@motorola.com>
Submit-Approved: Jira Key
When the phone is attached or detached from the
mod recalibrate the capsensors. This uses the
power supply device provided by the muc uart
driver.
Change-Id: Ic7002da8301ea3a3d9e3740c1532a0876d95a903
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1269885
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
