Set emmc vdd-io regulator in NPM mode during sleep to
avoid OCP issue. This is done only for ATP platform.
Change-Id: I32573627314dff29ef67d3bf3a8337c17f87d4db
Add cti trigger number to device tree for holi. Since some
platforms don't have swao cti, replace configuring cti trigger
number as hard code.
Change-Id: Ibb96b02f966c765f8744a278bb6b6f18da2edd4c
Have both PCIe0 and PCIe1 explicitly program their respective
controller PCIe AUX CLK frequency setting with 19.2MHz on
lahaina.
Change-Id: If1c2508f64aa2167d93d99d0248cfbd3d8ce27b6
Add trusted nodes to focaltech touch controller in primary VM.
This will allow PVM to enable/disable secure touch when
starting/stopping a TUI session.
Change-Id: Ia977e8e5269b874a0ad685926d02aa5f3f8054bc
Modem tsens sensors are directly accessible by APSS. So remove the QMI
tsens thermal zones which will not be enabled for Lahaina.
Change-Id: I7844ac68c3a723abafa1f43db6a853a98426dbe0
This change enables SMMU page table memory savings for qup and slim_aud.
No functional change but helps saving memory table space.
Change-Id: I094d0a18d6b5a0aab1ab5ac4f05dd183392f2e17
Replace deprecated PCIe DT entry for PCIe AUX clock controller
setting with the correct entry and value. PCIe core controller
requires AUX clock to be 16.6MHz for sdxlemur.
Change-Id: I2fa8d8c819bfd06f80b2e274f97b282caa90eb70
Having qcom,boot-option set to 0x1 on main sdxlemur devicetree
prevents other connects from being automatically enumerated.
Most connects do not require manual enumeration like Hastings
Prime (HSP) does. Therefore, move qcom,boot-option with 0x1 for
PCIe to HSP dedicated devicetree.
Change-Id: Ib344311c968fc610df474c5eadc693b45eed3dba
This reverts commit e506b909ef43f6464f97201f193f2197bc827346.
Commit e506b909ef43f6 ("ARM: dts: msm: Use PCIe_MSI for Shima")
There is MSI interrupts in PCIe DRV suspend state from device,
which caused NOC error when host try to read MSI status register.
Change-Id: Ia0393a2005bac508c0b4a43e41341507070ea3cd
Add SMEM, TCSR Mutex, Glink and SMP2P devices for enabling
interprocessor communication with MPSS, LPASS and RPM.
Change-Id: Idaf5abb3a4a3f6f25ff3c219531bfe8985209418
Add quiet-therm skin sensor thermal config for SHIMA with modem,
cdsp and gpu as cooling devices based on latest recomondations.
Update nspss-2 tsens sensor thermal config mitigation for SHIMA
with cdsp, gpu and modem as cooling devices based on latest
recomondations.
Change-Id: I6a8cf412b80a6d071bd669fafed61aa72ba41b24
The wakeup value needs to be programmed for cx-ret mode as well.
Update the state id to 0x134 to indicate trustzone to program
wakeup value.
Change-Id: I25143ff78842c7d415f46d0295cfce30b5727f96
Add cnss-enable-self-recovery flag for shima. It enables
self recovery on link down detected by host driver.
Change-Id: I2c66bcc0d9359dbb972b7180aa40eba404cb08d8
