This config enables msm shared memory driver.
This driver allocates shared-memory to be used by the modem processor.
Change-Id: I622d032c1abb8884027f9cc4f4428dbf53ac7035
Signed-off-by: Richard Patrick <richardp@codeaurora.org>
Enable cdsp loader driver as a DLKM module for
lahaina-gki configuration.
Change-Id: I89de24d1b2d09b8c856d569a4da217f6d41a3cc1
Signed-off-by: Edgar Flores <edgarf@codeaurora.org>
UCSI Glink driver handles the communication between OPM on the
Application processor and PPM which is charger firmware running
on the remote subsystem (e.g. DSP) over PMIC Glink.
Since this requires CONFIG_TYPEC and CONFIG_TYPEC_UCSI options
to be enabled, add them as well.
Change-Id: I44a05ab472d1401bdc4582a5c9535baff4c1c259
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Qualcomm Technologies, Inc. UCSI Glink driver handles the
communication between OPM on the Application processor and PPM
which is charger firmware running on the remote subsystem
(e.g. DSP) over PMIC Glink.
Change-Id: If7fced3eebee9d41ad1f51229c28e4f63b750250
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
This change is for general scheduler improvement.
Change-Id: I5fbadf248c0bfe27bc761686de7a925cec2e4163
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Sai Harshini Nimmala <snimmala@codeaurora.org>
[satyap@codeaurora.org: port to 5.4 and fix trivial merge conflicts]
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
This change is for general scheduler improvement.
Change-Id: I33e9ec890f8b54d673770d5d02dba489a8e08ce7
Signed-off-by: Sai Harshini Nimmala <snimmala@codeaurora.org>
[satyap@codeaurora.org: port to 5.4 and resolve trivial merge conflicts]
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
If this runqueue have iowait task and still force newly
idle load balance, will make iowait task performance
worse. Need to do the average idle time check if
there is iowait task on this runqueue to have upcoming
iowait task have enough cpu resource.
Change-Id: I8e4dd440edbbd14d5170fbcf358bdaf5cc5b26e8
Signed-off-by: Maria Yu <aiquny@codeaurora.org>
Signed-off-by: Biao Long <blong@codeaurora.org>
This change is for general scheduler improvement.
Change-Id: I7e6cc760a6add9ebdab7d67a176559bc640f7790
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
[satyap@codeaurora.org: port to 5.4 and minor update for WALT]
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
We often see traces that gold cpus goes to idle even when silver
has big tasks. This is because avg_idle checks does not allow
the gold cpus to enter idle balance. This is NOT okay when
silver CPUs have big tasks.
Change-Id: Ice00d43c70be105b5bc3ad09caa6047aa98d7402
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
[satyap@codeaurora.org: port to 5.4 and add WALT checks]
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Enable compilation of fastrpc driver as DLKM module on Lahaina.
This driver will be part of Lahaina GKI config.
Change-Id: Ie34249640949b192557735ccc64ffd75526b48ed
Signed-off-by: Edgar Flores <edgarf@codeaurora.org>
Enable the qpnp-power-on driver so that the desired power off
type can be configured (i.e. shutdown, reset, or warm reset).
Change-Id: I9e1d0157423c4d032fd5d948af1b008d7851310e
Signed-off-by: David Collins <collinsd@codeaurora.org>
Add support to control PON_GEN3_PBS and PON_GEN3_HLOS subtype
PON peripherals. These support a more limited feature set than
previous PON peripherals.
Change-Id: Id76ccc6ffd285ac68f350fb194f70bbbb04bd558
Signed-off-by: David Collins <collinsd@codeaurora.org>
Add device tree bindings for Qualcomm Technologies, Inc. QPNP
Power-on devices. These are PMIC peripherals which manage PMIC
power on, power off, key presses, and other related activities.
This snapshot is taken as of msm-4.19
commit 47598dd0e809 ("input: misc: qpnp-power-on: add support
to power off a modem chip").
Change-Id: If5e727c812a3c8cdcc263a40c72de50bb3ffbc78
Signed-off-by: David Collins <collinsd@codeaurora.org>
The qpnp-power-on driver provides support for key presses via
several key specific PMIC inputs. It also supports reading
power-on reasons and configuring the power-off type (i.e.
restart, shutdown, etc).
This snapshot is taken as of msm-4.19
commit 47598dd0e809 ("input: misc: qpnp-power-on: add support
to power off a modem chip").
Note that support for boot_reason, cold_boot, and ship_mode
configuration was removed as these have unmet dependencies and
are no longer needed.
Change-Id: I8105cf74d65609932146157f82a8e99f29a4dde2
Signed-off-by: David Collins <collinsd@codeaurora.org>
Enable CONFIG_REGMAP_QTI_DEBUG and CONFIG_REGMAP_ALLOW_WRITE_DEBUGFS
to facilitate easier debugging.
Change-Id: I8a1f34819f80df9ee988aea59b3895bd0af0843a
Signed-off-by: David Collins <collinsd@codeaurora.org>
Enable the gpio-keys driver so that GPIO buttons can be monitored.
Change-Id: I6e73af4ad85dbba8a087cca80f2f1b9b99ff5799
Signed-off-by: David Collins <collinsd@codeaurora.org>
Enable several SPMI and PMIC drivers which are needed to provide
baseline support of PMIC peripherals.
Change-Id: Ifb4414083764bbae64904d8629528cc4dda3a39c
Signed-off-by: David Collins <collinsd@codeaurora.org>
Enable CONFIG_IIO in lahaina_QGKI.config so that drivers which
depend upon it can function before CONFIG_IIO is enabled in
gki_defconfig.
Change-Id: I6afa93e6054d67157b1d435aa10688ab37220612
Signed-off-by: David Collins <collinsd@codeaurora.org>
Generate a new irqchip struct for each pinctrl device that is
registered to avoid sharing the same irqchip between devices.
This corrects the following error which is printed when
registering more than one pinctrl-spmi-gpio device:
"detected irqchip that is shared with multiple gpiochips:
please fix the driver."
Change-Id: I80ce67fc674b96f4386499f547395ceed7480583
Signed-off-by: David Collins <collinsd@codeaurora.org>
