Update header to fix struct re-definition errors
by including host time header instead of uapi
specific time header file.
Change-Id: I67b52ba2928480c24abbdf7a2d246635fedfaafd
Signed-off-by: Saurav Kumar <quic_sauravk@quicinc.com>
Define the MAC_PUSH action which pushes an MPLS LSE before the mac
header (instead of between the mac and the network headers as the
plain PUSH action does).
The only special case is when the skb has an offloaded VLAN. In that
case, it has to be inlined before pushing the MPLS header.
Change-Id: Iea0792dac8682bccc4a6a506244c81ed799f779f
Signed-off-by: Guillaume Nault gnault@redhat.com
Signed-off-by: David S. Miller davem@davemloft.net
Git-commit: a45294af9e96a3e060b6272fa7cd2c4b196de335
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[quic_jguidry@quicinc.com: Enabled net/sched filtering and classification in
sdxlemur.config]
Signed-off-by: James Wyatt Guidry <quic_jguidry@quicinc.com>
Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to
respectively pop and push a base Ethernet header at the beginning of a
frame.
POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any,
must be stripped before calling POP_ETH.
PUSH_ETH is restricted to skbs with no mac_header, and only the MAC
addresses can be configured. The Ethertype is automatically set from
skb->protocol. These restrictions ensure that all skb's fields remain
consistent, so that this action can't confuse other part of the
networking stack (like GSO).
Since openvswitch already had these actions, consolidate the code in
skbuff.c (like for vlan and mpls push/pop).
Change-Id: Ifce1d5fee3eb1741bdc88b22f9000226744cc56c
Signed-off-by: Guillaume Nault gnault@redhat.com
Signed-off-by: David S. Miller davem@davemloft.net
Git-commit: 19fbcb36a39eefbe8912a13ccc02e937b1c418d6
Git-repo: https://android.googlesource.com/kernel/common/
[quic_jguidry@quicinc.com: Added CONFIG_NET_SCHED_ACT_VLAN_QGKI to
sdxlemur.config]
Signed-off-by: James Wyatt Guidry <quic_jguidry@quicinc.com>
Add support for calibrated bat_therm channel which
has more accuracy than default bat_therm channel.
Change-Id: I7516c96aaca90db2dd84ed47364ea8f5d1259360
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Add support for calibrated bat_therm channel on charger PMICs
PM8350B and PM7325B, which has more accuracy than default bat_therm
channel.
Change-Id: Id24e187c5a83519f9913457e871429bf729d9213
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Add check for channel ID in fastrpc_buf_alloc to
fix out of bounds access.
Change-Id: I92f2717edcc91c19309589ce7c11c91c8129b71a
Signed-off-by: Swathi K <quic_c_kataka@quicinc.com>
Consider a case where dut enters suspend before port_bridge is started.
In that case, ep_queue in start_rx function fails as dut is in suspend
mode. The expectation is that when host resumes the DUT, the request
must be requeued in cser_resume as ep_queue of start_rx which was
called earlier was a failure.
Change-Id: I87015f00267af20450d625e2ea7a19a9de45c79a
Signed-off-by: Rohith Kollalsi <quic_rkollals@quicinc.com>
Device polls for ltssm state by reading PCIE status register as part
of ep_pcie_core_enable_endpoint. If it receives a perst assertion
event during polling, device completes polling and then handles perst
assertion with the existing logic. But polling for ltssm state is not
necessary here as the L0 link state is not possible after perst
assertion. This delays the handling of perst assertion and subsequent
perst deaasertion events.
To avoid this delay, avoiding polling for ltssm state if perst is
asserted. Added check for perst during polling of ltssm state and
breaking the loop if perst is asserted.
Change-Id: I38dc82070749751cfd14661ac95eb95eb8dcb665
Signed-off-by: Sai Chaitanya Kaveti <quic_skaveti@quicinc.com>
Validate n_acl_entries specified by the requesting VM.
Limiting n_acl_entries to 1 for now based on the existing check in
mem_buf_alloc().
Change-Id: I802219ada9ee9109d18a42b2a80539d1cbd4df64
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add support for dynamic cpu's in cpu voltage cooling driver.
Change-Id: Id8dd7800d230e657c16d853da673cb5e9aaf3ca6
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
This change adds a NULL pointer check for i2c rx callback function.
In some corner case and rare scenario, it may happen that delayed
callback from GSI for any unexpected sequence can result into accessing
stale message pointer which can be NULL.
Actual root cause should be found but this adds a protection check.
Change-Id: Iab2196812289026674ee3b26d27c4f20a01bbda2
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Added the support for disabling the PCIe halt write and read feature.
By default PCIe halt write/read feature is enabled and through
device tree flag, PCIe halt Wr/Rd feature can be disabled.
In some targets reported throughput degradation due to PCIe latencies with
PCIe halt write/read feature. So, provided the support to enable and
disable PCIe halt feature.
Change-Id: I83813571bedd0a0399f4ab473e6ddfbb975c8fe4
Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@quicinc.com>
This reverts commit 9611cf8fcfdda47ce41bd48f2f55ad6472e546b8.
Change-Id: Idfba6e78592ccdb09d576a1bbc37c31f769c8ac2
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Add and define the ipa_client_type enum for
IPA_CLIENT_MHI_COAL_CONS to be used for the
MHI coalescing pipe.
Change-Id: Ie06765bca995f7e35f4d4d2bc091cdbf3946a676
Signed-off-by: Michael Adisumarta <quic_madisuma@quicinc.com>
As part of posted event, event_data is getting freed.
Check for FW crashed using event_data after posting
event can be incorrect since event_data might have been
freed. Move FW crashed check using event_data after
posting event.
Change-Id: Ie82a0b7b4ceb40063318ab2d926b9c14412fb2c9
Signed-off-by: Naman Padhiar <quic_npadhiar@quicinc.com>
Untrusted application can attach to guestOS and staticPD if it can
somehow make INIT IOCTL call with ATTACH flag. This is a potential
security issue as the untrusted application can crash guestOS or
staticPD. Restrict attach to guestOS or staticPD request if request
is being made using non-secure device node.
Change-Id: I322c7b242fd0baaf1c1bce2d83b992fecb0ca593
Acked-by: Ekansh Gupta <ekangupt@qti.qualcomm.com>
Signed-off-by: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com>
Avoiding null pointer dereference in mhi_uci_client_open API in uci layer
by changing the location of the condition check for uci_handle.
Change-Id: If2cc99f47f4c5d05d0df4a5b4900894683f7c8d1
Signed-off-by: Sai Chaitanya Kaveti <quic_skaveti@quicinc.com>
Make changes to support WDS enablement over WLAN.
Change-Id: I063d387054da32c77405b9631557b37980fe0aeb
Signed-off-by: Chaitanya Pratapa <quic_cpratapa@quicinc.com>
Some QoS blocks require voting for BCMs before their registers can be
accessed, since they require clocks and regulators controlled by BCM.
Vote for these BCMs before configuring QoS during probe.
Change-Id: I6aaf8a963f4ace12eb639b61ae0ae45ac045d849
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Some QoS blocks require voting for BCMs before their registers can be
accessed, since they require clocks and regulators controlled by BCM.
Change-Id: Ic93d224c7dc56c8e56d527179a0c2d1e888e3822
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
BCL requires that respective Central Broadcast register
be programed from TZ. This programing happens only
when zap shader firmware load is successful. Zap firmware
load can fail in boot up path, but we are setting
bcl_enabled to true before firmware load is successful.
This is not correct. BCL should be enabled only after
respective register programing is done from TZ side.
Otherwise gmu goes to error state when ACK from BCL is
expected during boot. Enable BCL only after we
successfully complete first boot to ensure that Central
Broadcast register is programed before enabling BCL.
Change-Id: I6267c943262cc0448fa77d29d5ae6e8f5cae7e9f
Signed-off-by: Pranav Patel <quic_pranavp@quicinc.com>
Add additional placeholder for sdr sensors to make common TS list
compatible with all the targets.
Change-Id: I566cf7b212b64e52ed788f73ff097b9327e6874e
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
Add new IOCTL to get external router mode and ipv6 prefix
addr and mask. Define new structs and enum to hold this
ext route info.
Change-Id: I3ef9ebdb0c33c5deeda27b340c1261e08a032b7c
Signed-off-by: Michael Adisumarta <quic_madisuma@quicinc.com>
