Add iio_write_channel_raw to qcom whitelist, as it is used in
QPNP-SMB5 charger and QPNP-LEDS-V2 flash drivers.
Change-Id: Ibb25568afc1ef408e438f5f1eabf37e7dc7ecee6
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Seek time out is set to 7 sec and when lower Channel Spacing
is configured. RTC6226 chip is taking more then 7 sec to scan
the whole band range.
Set the seek timeout to 15 sec so that scan can be performed
within the seek timeout value.
Set the Tune time out value to 3 sec.
CRs-Fixed: 2744390
Change-Id: Id79f21aaac049b78ec22b8f90c533deac4bc448b
Signed-off-by: himta ram <hram@codeaurora.org>
Sometime remote may try to send packet before receive callback is
assigned. Which can result in dropping of packets on apps.
Acknowledge intent request but queue the intent only when receive
callback assignment is complete.
Change-Id: Ie366c24e204db7f1609e2345ee3324cb00f56f3e
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
When the last byte of an incoming keyblob is corrupted for
an UNWRAP_IMPORT operation, HWKM does not fail as it is
considered a noop. However, we must fail as it will classify as
a corrupted keyblob.
Change-Id: Ia9f74d150163139f879287e9ffcc82277d76685a
Signed-off-by: Gaurav Kashyap <gaurkash@codeaurora.org>
Section name should be placed in String table.
Currently, we used static version for string table
index to update subsequent section names.
Due to this string table index keeps on increasing
during every new dump(subsystem restart) request.
This ultimately will result in buffer overflow,
leading to Redzone overwritten.
Hence, as a fix now reset, this string table
index once dump capture is complete.
Change-Id: Ibc2446ae4011db5291044eacdc1a1119597d862a
Signed-off-by: Jitendra Sharma <shajit@codeaurora.org>
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
If dts entries are missing, might be which are not required entry
for a SoC. Instead of logging them as error message moving them
to log messages.
Change-Id: I1e2d2e75ee3d5ee9533b12a634a694b9b1da9d08
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
This change will add all the power sources which are needed
for BT SoC's QCA6390 and QCA6490 to operate.
Change-Id: Ice58ba2b5c637c9be5cab5118c4b060037c1077d
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
LSE_ATOMIC is not supported for holi targets.
Change to disable LSE atomic operations, which
may result in crash for non-cacheable memory atomic
access.
Change-Id: Ibe2aba59de3b907908bae99f9f1cd92e128f348d
Signed-off-by: Ashish Bhimanpalliwar <abhiman@codeaurora.org>
Signed-off-by: Mayank Grover <groverm@codeaurora.org>
Disable CTI save function on perf build to avoid the power and performance
issue.
Change-Id: Ie656b6e911c841b134a78cba0fc5ba089a3deffc
Signed-off-by: Yuanfang Zhang <zhangyuanfang@codeaurora.org>
for qgki, as we are using the lpm-levels driver for our core
and cluster lpms so disbaling the CONFIG_ARM_CPUILDE_PSCI for
holi in qgki config.
Change-Id: Ie9e40d5fb4ef7324e2c556cea4db26d63ca1ab3e
Signed-off-by: Raghavendra Kakarla <rkakarla@codeaurora.org>
Enable various USB CONFIGFS driver modules that add
support for NCM, CCID, CDEV, and GSI and support
for USB host mode video devices as well.
Also, enable the driver module to support USB PHY
and low power audio as well.
Change-Id: Icecd4af4be776f2b8b31677287a086cd6788a3b8
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Enable memory to memory multimedia driver support
to allow v4l2 rotator compilation in Holi.
Change-Id: Iaabd0c7ec6f74c0ba2cad5e4d79825339333e33f
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Add USB3 master so that client can vote for bandwidth
on Holi.
Change-Id: I37661eda4febdff619a703f423aca957f91347b5
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Add USB3 master ID for Holi so that client can vote
for bandwidth.
Change-Id: Ied8597df5bb86989657d8493816c4a882b898b3f
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Get fps info from UMD and cycle count from FW to scale CVP
clock frequency to match CVP workload.
Change-Id: I47c18173987360271f0b2575e815aff0e00afa8d
Signed-off-by: ronaldk <ronaldk@codeaurora.org>
Signed-off-by: George Shen <sqiao@codeaurora.org>
If someone plays with the UFS clk scaling devfreq governor through sysfs,
ufshcd_devfreq_scale may be called even when hba is not runtime ACTIVE,
which can lead to unexpected error. We cannot just protect it by calling
pm_runtime_get_sync, because that may cause racing problem since hba
runtime suspend ops needs to suspend clk scaling. In order to fix it, call
pm_runtime_get_noresume and check hba's runtime status, then only proceed
if hba is runtime ACTIVE, otherwise just bail.
governor_store
devfreq_performance_handler
update_devfreq
devfreq_set_target
ufshcd_devfreq_target
ufshcd_devfreq_scale
Change-Id: I1345985d50bcb239b7af008f7d295de3d7581112
Signed-off-by: Can Guo <cang@codeaurora.org>
