Add QCA vendor interface for userspace to get information of usable
channels for different interface types from the driver/firmware.
Change-Id: Ice662b9f14e95f32f853637e73bccd686678f278
CRs-Fixed: 2939047
The existing assertions for unmapped variable in
rx descriptor results in an undesired bug_on since
the unmapped value is 0 for active descriptors.
The fix is to modify this assertion so that bug_on will
be triggered only if the unmapped value is 1 in rx
desc.
Change-Id: I03b27e0e42ce3c42b9fa148da9258063b0209b08
CRs-Fixed: 2985248
Wake-IRQ can be received just before Kernel issuing
suspend_noirq callback, such wake-IRQ would not be
handled by Kernel. So check if any tasklet most likely
CE2 is pending and abort suspend_noirq if true.
Change-Id: Ie3d6de97179aa0d8f383a086f4f8df27d3fc5254
CRs-Fixed: 2981882
Add CDP reason code support for sending DELBA request,
so protocol layer can make decisions for special cases.
Change-Id: I4e4b2e7f7232a8ab12d4c7838f97908f481dc787
CRs-Fixed: 2983553
The earlier logic for scanning non-inheritance IE fails if
non transmitted bssid profile has any extension element
such as MU EDCA before the extension element with
non-inheritance IE.
Since MU EDCA is also an extension element and it does not
have noninheritance element id in it, the logic used to fail
as the driver does not check further for any other extension
element ID in non transmitted bssid profile. Because of this
the IEs part of non-inheritance list used to get inherited,
causing disconnection issue.
With current fix, the scanning for non-inheritance IE has been
taken care properly. Driver will go through the non transmitted
bssid profile until it finds the extension element with
non-inheritance element ID in it.
Change-Id: Ib4346600a880a8390c6d023cf403ed18c62406d2
CRs-Fixed: 2935065
When host receives BAR frames with OOR/2K jump in sequence
number it updates REO HW with new starting sequence number
and requests F.W to setup peer reorder queue. But REORDER_QUEUE_SETUP
is already requested to F.W as part of initial add BA in host.
So while handling OOR/2K jump BAR frames don't send
REORDER_QUEUE_SETUP to F.W
Change-Id: Idc3657e901dc792f699b53c45e4ae5133d286891
CRs-Fixed: 2981280
If there is any non-inheritance element present as part of the
nontransmitted BSSID profile then while generating scan entry
for that profile, driver need not inherit those list of
element IDs and list of element ID extensions from the
transmitted BSSID profile.
Since non-inheritance element is an element ID extension, it
should be part of extension element. So the logic we use over
here is to find if there are any extension element present in
the nontransmitted BSSID profile. if yes, then only go ahead
with below logic or else go with the normal flow.
Logic:
Mark and store the start of the list of element IDs and
list of Element ID extension.
While generating the new ie for the non transmitted BSSID
profile, do not inherit the IEs present in the above
mentioned lists.
Change-Id: I466afa8273e841b6f7656b1dc59342bc2d4f13bc
CRs-Fixed: 2883389
If any nontransmitted BSSID profile is fragmented across
multiple MBSSID elements, then it is called split profile.
For a split profile to exist we need to have at least two
MBSSID elements as part of the RX beacon or probe response
Hence, first we need to identify the next MBSSID element
and check for the 5th bit from the starting of next
MBSSID IE and if it does not have Nontransmitted BSSID
capability element, then it's a split profile case.
This change is responsible in accumulating the non
transmitted BSSID profile, fragmented across multiple
MBSSIDs, so that the scan entry will not miss any
information.
Change-Id: Ia78cc47d1ffd03ada659d257b83741e7ab921fa2
CRs-Fixed: 2883389
There is a time involved between the smmu fault initiated
and the eventual system panic. In this time there is a
possibility of the nbuf history being overwritten losing
the information on the nbuf which might has actually caused
the SMMU fault.
Set the ssmu state and dont track the nbuf's when the smmu
fault is detected.
Change-Id: I579da332766618161567764656005ef13667270e
CRs-Fixed: 2960070
Error log peer not found is coming spurious in
dp_2k_jump_handle on continuous error pkts, so
rate limit the same.
Change-Id: If4b577a7759136ea824ca62b63ef91d102b8decb
CRs-Fixed: 2978939
If an MSDU is scattered across multiple nbufs, rx
attention tlvs are only valid for the last nbuf for
this MSDU. MSDU len err field is fetched from rx
attention tlvs for all the nbufs which could result
in an incorrect drop of packets.
Fix is to check for msdu len err for nbufs with msdu
continuation bit set to 0.
Change-Id: I0ed5cbb37a2ba34a39328618e3f5e66d419d7cca
CRs-Fixed: 2982308
CE irqs affinity is set to gold cores, but affinity
hint is not removed while freeing irqs.
So remove CE irq affinity before freeing them.
Change-Id: If3822422f823cb3caa6e291387a2beadc62049b7
CRs-Fixed: 2975529
Add functions to parse and extract wmi smart monitor
event received from target.
Change-Id: Ic18e3134b684c5f8e12839e997d628909a7e27c9
CRs-Fixed: 2969247
For operating class 128 and 130, a new center channel was added to list.
Update the table to reflect the new channels.
Change-Id: I6157f02089f7b4f16231a6bb35d829343bbc968f
CRs-fixed: 2975890
For 2G and 5G, the secondary channel list is coming from
master channel list which is not filtered by NOL.
Fix by using cur_chan_list to fill the secondary channel
list for 2G and 5G part.
Change-Id: I5e9ede6e39a66ad1a2f0e6c32c151ef175be6dab
CRs-Fixed: 2976916
First Requirement:
In case of WTC_BTM roam trigger reason, if FW reports rssi
threshold for 5G and 6G AP via wmi_roam_trigger_reason,
Host should print it in kmsg.
If wtc_candi_rssi_ext_present is set (1), It means fw
reports 5g and 6g candidate rssi (new firmware case).
If wtc_candi_rssi_ext_present is clear (0), It means fw
doesn’t report 5g and 6g candidate rssi (old firmware case).
Host use flag "wtc_candi_rssi_ext_present" to keep backward
compatibility.
Second requirement:
As per user space, value for scan mode in WTC command, is
like below:
0: no Scan, 1: partial scan and 2: full scan.
For NO scan case, FW sends value
ROAM_TRIGGER_SCAN_MODE_NO_SCAN_DISCONNECTION (3)
in wmi_roam_trigger_reason-> wtc_scan_mode. When driver receives
WTC scan mode as ROAM_TRIGGER_SCAN_MODE_NO_SCAN_DISCONNECTION,
it should print value as 0 instead of 3.
Convert WTC scan mode comes from FW to
wmi_configure_roam_trigger_parameters->scan_mode to make it
compatible to WTC command.
Change-Id: I8266460aac1272d345e4349c2ca52b4f9a745d4c
CRs-Fixed: 2965362
There is potential risk when starting CFR and resume happens at same
time, so this change adds wake lock for enhanced CFR.
Change-Id: Ifbde12cb73092b7fc4ef517e57051af4ffe7a79f
CRs-Fixed: 2974733
Runtime put should be done in hif_pm_runtime_get when
return value of __hif_pm_runtime_get is negative. In
the issue scenario, the ret value will be set to 0 when
the return value of __hif_pm_runtime_get is positive.
The store operation for ret variable somehow did not take
effect and the if check for non-zero ret value to do
runtime put did go through. The return value to
dp_tx_hw_enqueue from hif_pm_runtime_get is the updated
ret value of 0. This will result in double runtime put
for a single runtime get.
Fix is to modify the ret variable check to negative
instead of non-zero to ensure runtime put happens
correctly.
Change-Id: Idc380a11c82b6d1acf7c750e7b93776ac9d6b4f2
CRs-Fixed: 2969879
Add a new API reg_get_6g_power_type to update ap power
type when STA roams in/out of 6GHz channel. It is invoked
from CSR during initial connection and sch beacon process
during roaming.
Change-Id: I0d20d4d7f291ec608b27a1611c8877c33f4b45b1
CRs-Fixed: 2968243
hal_reg_write_need_delay is invoked immediately after
q_elem->valid check. The first two instructions in
hal_reg_write_need_delay could be in the CPU instruction
pipeline which could result in possible loading and
dereferencing of NULL srng from an invalid q_elem.
Fix is to invoke hal_reg_write_need_delay just before
hal_process_reg_write_q_elem and also add NULL checks
to avoid the srng NULL pointer dereference.
Change-Id: I2de50b1e78782e3c91a9cb4477f28d91f9c29439
CRs-Fixed: 2973257
Currently, when appending the 6G reg rules to the reg rules list, the
index is decided by the current AP power type. However, the reg rules
sent to user space should not be influenced by what mode the SAP is
operating in. Update the logic to always use LPI reg rules.
Change-Id: Iac4cddb2dc1d73ce35bdbe6365ea14af26656bbf
CRs-fixed: 2969456
Add feature capability indication for dbs for the
drivers to advertize support for this.
Change-Id: Ic6941e58a30d6aa6a867a12ddd7a8db5abbb1673
CRs-Fixed: 2821654
GCMP header and MIC are not removed for received
fragments which will result in incorrect ethertype
and presence of LLC hdr in the data when the frames
are sent to network stack.
Fix is to add support for GCMP in rx de-fragmentation
path.
Change-Id: I83ed29a766e40e32f4b712342ebd40d08a2c65e0
CRs-Fixed: 2941879
Fix the channel validity check for DS param IE in beacon or probe
response frames in scan.
Change-Id: I17132d3d406b2953ad31dc6ab40b0158e21bc5c4
CRs-Fixed: 2960334
In SAP case, external authentication(offloaded SAE authentication
to userspace) status event carries only PMKID to allow/disallow
peers to do PMKID+open auth based connection once the peers are
already SAE authenticated.
A check is added on the PMK length with the below change,
change: Ic41c2044e70f8d375130ef9e0af9fe4b83027c26. It rejects the
PMKID update to the pmk cache if the PMK length is 0. It's not
allowing to cache PMKID derived as part of SAE authentication.
There is no need to cache the PMK in SAE case as it won't be
used internally by driver or won't even be sent to firmware.
So, don't add any check and allow PMKID only entries also to
facilitate PMK caching mechanism in SAE SAP.
Change-Id: Ibd72975e91d93af9665c392b4e7a708a5f9c336a
CRs-Fixed: 2967752
Currently IPA tx buffers are fixed at 1007 buffers.
Adding INI support to change number of TX buffers at load time.
Change-Id: Ide0357554f34759198276b9699e0e6f4a3e20051
CRs-Fixed: 2957916
There is compilation error about decimal constant on 32 arch. Fix is
to add suffix "UL" and to mark as unsigned.
Change-Id: I68b70fbfca4da244fdd9a82b1e28046c0a3b9a3d
CRs-Fixed: 2798875
Configure the MBSSID info to FW for Tx AP connection to enable
MBSSID functionality in FW.
Change-Id: Ida415a5c8f1dcb66e8890595b5f3038a611d62a5
CRs-Fixed: 2959158
Currently, host comapres HT Ie with htcap_cmn_ie
structure size but returns err in case ie len
is different from structure len which may break
the iteration and can lead to scan entry creation
failure.
Fix is not to break the loop and perform action
based on other Ie to avoid Ie parse failure which
leads to scan entry creation failure.
Change-Id: I93f0d67ae0f7ea8bb5dbeabc895b5c3d1ae43a73
CRs-Fixed: 2965729
Currently dp_rx_err_process expects ring descriptor to be only
LINK_DESC_TYPE. In certain cases BUF_ADDR_TYPE ring descriptor is
observed in reo_exception ring. Add logic to handle the same.
Change-Id: I5baecc3f8eafc0830672b91bc9d9607b568a6cda
CRs-Fixed: 2954653
Revert "qcacmn: drop duplicated EAP frames from REO exception path",
allow all EAP frame delivering to stack including retried ones.
Change-Id: I73733841c1feb21d5b5fd160856a8fe9c21168fc
CRs-Fixed: 2959701
Set the SAE EAPOL offload support in resource config based on
WMI_SERVICE_SAE_EAPOL_OFFLOAD_SUPPORT bit received in service
bitmap from Firmware.
Change-Id: I878736105c070df514dfe8d989541227b3baad11
CRs-Fixed: 2957082
Currently there are no sufficient debug logs during
AST cleanup of peers, to conclude in which context
the AST got freed up, hence adding more debug logs.
Change-Id: I5603d856aed8cc3860a78d24d51cd8b5386d38bb
CRs-Fixed: 2956910
Host add support to send cfr data via nl events to userspace
applications. Host registers callback when user send vendor
command to set transport mode.
Change-Id: Ieed3b6e09d871639af58336074313120d51762e2
CRs-Fixed: 2952096
User sets CFR data transport mode using vendor command
QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG. By default
CFR data transport mode is relayfs, user uses vendor command
attr QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_TRANSPORT_MODE to set
transport mode QCA_WLAN_VENDOR_CFR_DATA_RELAY_FS or
QCA_WLAN_VENDOR_CFR_DATA_NETLINK_EVENTS.
If user sets QCA_WLAN_VENDOR_ATTR_PEER_CFR_DATA_RECEIVER_PID
attr in QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG vendor
command then hosts uses RECEIVER_PID to send unicast NL events
for CFR data.
Change-Id: I40e896fad8af24e761fcbedeba761f4a3815f0b8
CRs-Fixed: 2952095
If STA country code is US and 6G AP country IE is other than
US, STA would use VLP mode. Since US VLP is not determined
we don't allow connection to go through. Additionally, don't
include such AP to scan result.
Change-Id: I41b0c7dbea681b2ef1bea7c0a572ee1d7248fa6e
CRs-Fixed: 2953248
Add QCA interface to specify the RSSI thresholds separately for candidate
APs from different bands.
Change-Id: I51d2e7c4490fde3901a4e4e8ad31d9c18823637c
CRs-Fixed: 2951242
When handling RXDMA error marked frames that from MAC1,
wrong rx descriptor pool is referenced, so allocated
buffer length is incorrect and lead to skb crash. Make
changes to always uses mac0 rx descriptor pool for MCL
platform.
Change-Id: Ica01c3967d6248a23ea745da63149dae9cd56677
CRs-Fixed: 2945573
Optimize refill buffer pool feature code to be
light weight on CPU, so that refill thread will
consume less CPU resources and also replenishing
RX buffers will be done faster.
Change-Id: I849ca60558c6197003d95e7d54fdb5f837cdc217
CRs-Fixed: 2950166
Host sets num_grp_tlvs based on modified_in_curr_session, which uses
default value - MAX_RESET_CFG_ENTRY. MAX ta ra entries changed from 16
to 4 for QCA6490 and QCA6750, so change MAX_RESET_CFG_ENTRY from
0xFFFF to 0xF here.
Change-Id: Ie057b8763c0126bd0cacab4fd21da9df0d5e71f2
CRs-Fixed: 2957324
