ss_timeout(soft start timeout) used to check if input current
is above BUSUCP threshold.
modify ss_timeout as bq25960 POR value 10s to make sure CP don't disable
Change-Id: I31f1b6d648a7b5a64a4a2d3036b1a36af44f6ec9
Signed-off-by: wanggc6 <wanggc6@motorola.com>
Reviewed-on: https://gerrit.mot.com/2208317
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Remove the print function of fingerprint hard interrupt EGISFP
Avoid interrupt processing time is too long Trigger watchdog
Change-Id: I3e7632b0baa84b1f1fc09dd851307bd08be231a7
modified: etxxx_fp.c
Reviewed-on: https://gerrit.mot.com/2206419
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
- change non must have value location, avoid rc value impact last
probe return rc value.
- add default brightness config, avoid brightness change when boot
- don't exit probe if map mode don't set, map mode is not must have
value.
Change-Id: Ifbc6a4c5f7a4b5bed24b5b44fb6117b4c331c776
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2207191
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Modify modules files , solve the problem of slow bus voltage rise
caused by the difference of driving codes between the two turbo power driving chips
Change-Id: Id5390c574d38e6cb479cdfca2ee638540f42214b
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205277
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1. adjust the charging enable logic from sysfs node
2. fix logic issue on charging disable from mmi charger
3. add constant charge current and input current limit
in charger power supply
4. Disable high and low load switch when charger insert
Change-Id: Idbdfb2c0c10d69927402e2f219d642f58b7c9f1d
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205999
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Notify fps work mode thru relay so that touch can enable
FOD event when fps is working and disable FOD event when
fps is in idle
Change-Id: Ie2b284d24d3ac2c77d17455b9465d06e0041eb44
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205920
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
1. Register FOD state thru mmi_relay.
2. Send Fod event when FOD is enabled.
Change-Id: I56fed42e8377dc86c84e8dd1042cd04a55fb0a16
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205960
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add CLI touch factory test cp_panel node,from this node we can
read out self-capcitance raw data and to verify whether calibration
data is ok.
Change-Id: I5f52fb464ff8ca583e518bd110fad8a86c6669d1
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205761
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
The batt_psy has been init to bms psy in prob api, so mmi_charger
can't get the battery power supply change to update info.
Change-Id: I93954a840bd8cb02d127e04902991f6016a8b421
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205313
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Default charging reg ILIM is enable , but There is no HW ILIM R in Rhode5G.
Could Disable HW ILIM by reg BQ2589X_ENILIM_DISABLE and DTS .
refer to : https://gerrit.mot.com/#/c/2204336/
Change-Id: I9aef32c86bddedb1672ea34918cd643871fd4abc
Reviewed-on: https://gerrit.mot.com/2202328
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
CLI parade touch need to do suspend and resume when receiving
suspend and resume notifications from display module.
Change-Id: Ibcb2e10f5974b9e546b9ffd0aa2ead3d106e4a0d
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2200231
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Support receiving dual-screen notifications to support
touch ic suspend and resume.
Change-Id: I2af3fb7632ca164c85626957f42c0d3dca2af179
Reviewed-on: https://gerrit.mot.com/2188839
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: <zhuwg1@motorola.com>
Submit-Approved: Jira Key
After the thermal temperature reaches 39 ℃, the battery voltage will be limited to 4.1V,
and the whole charging process will go twice CV, resulting in excessive charging time
Change-Id: I33a36eb1329a3cb207bb8a20349a4045520142d1
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2201513
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: gaoyx9 <gaoyx9@motorola.com>
why:
Let focal's hal to control the log level
Change-Id: I922c39340bab392a51f2fb08d7a28b4f594713e8
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2201521
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
Add NFC ST hardware detect code
use ST_NFC_HW_DETECT macro to open this feature
a sys node under i2c device node will be created to show which
chip is in use, support both dload mode and route mode
support both ST21J chipset and ST54J chipset
Change-Id: Ie69ea44e33b25a32d53d260c10414b4939389cc2
Signed-off-by: zhuangnk1 <zhuangnk1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2191006
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zishang Zhou <zhouzs1@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Qiang Nie <nieqiang@motorola.com>
1.enter charger mode when usb plugin;
2.create ito test failed file when ito test fail
Change-Id: I33e8a05a4dc4a81200406751ad8480a1a97993b9
Signed-off-by: huaqin71 <huaqin71@motorola.com>
Reviewed-on: https://gerrit.mot.com/2200364
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
This reverts commit 46abea9fb423a06c294ca7612ae11708561dc485.
this change has broken the multi point function
Change-Id: Idc9e912912bbd5a520f8b6d1ba8889820f0a6cad
Reviewed-on: https://gerrit.mot.com/2199829
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add module parameter to enable panic on delta_vbat when the
paired battery delta_vbat exceeds threshold of paired battery
load off state.
The panic is enabled only for engineering devices, and disabled
by default.
Change-Id: I0afe222c59e155af507e53e7ede6ede31ddf367a
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2196448
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
For build error from 8450 postCS6:
9573 ERROR: modpost: module parade_tma5xx_mmi_core uses symbol kernel_read from namespace VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver, but does not import it.
9574 ERROR: modpost: module parade_tma5xx_mmi_core uses symbol filp_open from namespace VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver, but does not import it.
Change-Id: I14cf7ee5284f2fbd378643262db7840da52bf7cf
Signed-off-by: a7301c <a7301c@motorola.com>
Reviewed-on: https://gerrit.mot.com/2195084
Reviewed-by: Qing Chang <qing@motorola.com>
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
This is a dynamic adjust battery voltage
for cyprus IP8
Change-Id: I8ac9acb903cf6418d28969fa9cef996529663275
Reviewed-on: https://gerrit.mot.com/2195453
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1.fix The first time the battery be inserted, the power display is low
2.reduce the time of temperature update
3.enable delay-shutdowm feature to set showdown voltage to 3.4v
4.enable SOC_SMOOTH_TRACKING feature to set show battery capacity 100%
when the real power is 97%
Change-Id: I96d88ce6e4d475a02005234f42a0f4943184bb94
Reviewed-on: https://gerrit.mot.com/2192328
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
