qctecmdr
e4d6a365eb
Merge "ARM: dts: msm: update apps smmu actlr settings"
2020-08-27 00:31:40 -07:00
qctecmdr
a65d5a88a2
Merge "ARM: dts: msm: Add addtional KGSL SMMU clocks for Shima"
2020-08-27 00:31:40 -07:00
qctecmdr
30b50f2d9b
Merge "ARM: dts: msm: Enable the kgsl coherent test node on Shima"
2020-08-27 00:31:40 -07:00
qctecmdr
f9162ff283
Merge "ARM: dts: msm: Change interrupt no for tx swr gic irq"
2020-08-27 00:31:39 -07:00
qctecmdr
6f153898da
Merge "ARM: dts: msm: Update GPU thermal rule for lahaina"
2020-08-26 20:58:47 -07:00
qctecmdr
06c18355fc
Merge "ARM: dts: msm: Add I2C NFC device node for shima"
2020-08-26 20:58:46 -07:00
qctecmdr
576fa1e8eb
Merge "ARM: dts: msm: Update DLL_CONFIG_3 and USR_CTL as per HSR"
2020-08-26 20:58:46 -07:00
qctecmdr
1f4f2149e7
Merge "ARM: dts: msm: Add utility factor for Holi"
2020-08-26 20:58:46 -07:00
qctecmdr
26517a70d8
Merge "ARM: dts: msm: fix to indetify proper adsp variant"
2020-08-26 20:58:46 -07:00
qctecmdr
1b9209211b
Merge "ARM: dts: msm: Add alias for uart nodes for shima"
2020-08-26 20:58:46 -07:00
qctecmdr
724fb77709
Merge "ARM: dts: msm: Change vcpu sched priority for trustedvm"
2020-08-26 17:22:49 -07:00
qctecmdr
a57545674b
Merge "ARM: dts: msm: Increase the size for scandump on shima"
2020-08-26 17:22:49 -07:00
qctecmdr
eacd775a4d
Merge "ARM: dts: msm: Add llcc_1_dcache dump node for lahaina"
2020-08-26 17:22:49 -07:00
qctecmdr
857f7a64c2
Merge "ARM: dts: msm: Add interrupts for Limits for HOLI"
2020-08-26 17:22:49 -07:00
qctecmdr
03c7240bde
Merge "ARM: dts: msm: Add Touch support on shima"
2020-08-26 13:02:15 -07:00
qctecmdr
6bdec6b464
Merge "ARM: dts: msm: Update frequency of xo_board and div of xo_board"
2020-08-26 13:02:15 -07:00
qctecmdr
e1c1d31bbd
Merge "dt-bindings: interconnect: add CPUCP L3 bindings"
2020-08-26 13:02:15 -07:00
qctecmdr
806bc88b67
Merge "ARM: dts: msm: Enable smmu s1 from wlan side"
2020-08-26 04:59:22 -07:00
qctecmdr
82a034500a
Merge "ARM: dts: msm: Modify the "init-voltage" of PON rails for holi"
2020-08-26 04:59:22 -07:00
qctecmdr
4dc27c775f
Merge "ARM: dts: msm: Modify the "init-voltage" of PON rails for shima"
2020-08-26 04:59:22 -07:00
qctecmdr
5f75f1ec8a
Merge "dt-bindings: Document the "qcom,qpnp-pdphy" binding"
2020-08-26 04:59:22 -07:00
Vatsal Bucha
9d9217251c
ARM: dts: msm: Change interrupt no for tx swr gic irq
...
Change interrupt no for tx swr gic irq.
Change-Id: I0b248aa14a2331dac4a315c9004341edd9e8d7d6
2020-08-26 14:58:36 +05:30
qctecmdr
0a4f05c6c7
Merge "ARM: dts: msm: Add trustedvm enablement nodes for Shima"
2020-08-26 00:27:05 -07:00
qctecmdr
6f78d11111
Merge "ARM: dts: qcom: Add clocks to access KGSL SMMU register space"
2020-08-26 00:27:05 -07:00
qctecmdr
e86965385d
Merge "dt-bindings: power: Update QPNP SMB5 documentation"
2020-08-26 00:27:05 -07:00
qctecmdr
7365594d14
Merge "dt-bindings: power: Update QG compatible strings and add IIO channels"
2020-08-26 00:27:05 -07:00
Faiyaz Mohammed
b1816f1bb0
ARM: dts: msm: Enable the kgsl coherent test node on Shima
...
- Enable the KGSL coherent test device node on Shima.
Change-Id: Ie7de64d0610579ae5c24c0d54734dcef7f392166
Fixes: 6a43de376b
2020-08-26 12:55:10 +05:30
qctecmdr
e62e211f2f
Merge "ARM: dts: msm: update cpuidle state definitions"
2020-08-25 20:50:03 -07:00
qctecmdr
67d837769b
Merge "ARM: dts: msm: Update PCIe0 PHY settings to v1.00 for lahaina v1"
2020-08-25 20:50:03 -07:00
qctecmdr
db4b1b4b2e
Merge "ARM: dts: msm: Add PMIC overlay to sdxlemur platforms"
2020-08-25 20:50:03 -07:00
qctecmdr
eccd321579
Merge "ARM: dts: msm: Swap interconnect masters"
2020-08-25 20:50:03 -07:00
Sarthak Garg
3d7a8360e6
ARM: dts: msm: Update DLL_CONFIG_3 and USR_CTL as per HSR
...
Update DLL_CONFIG_3 and DLL_USR_CTL as per HSR.
Change-Id: I2ffca3c79f161f15e35895b67dc791af52d65500
2020-08-25 20:38:50 +05:30
Bhuvan Varshney
c370aad7c7
ARM: dts: msm: Add I2C NFC device node for shima
...
Device node changes required on shima describing
the GPIO configuration for Nfc controller chip.
Modified corresponding Nfc device node
for IDP & QRD platforms.
Change-Id: I122dc7b27204705309f6e0e667cda3410703a09d
2020-08-25 07:58:10 -07:00
Odelu Kukatla
2948966094
ARM: dts: msm: Add utility factor for Holi
...
Utility factor needs to be applied for aggregated bandwidth
so as to run the bus clock at required frequency.
Change-Id: Ia7c4369203b1ebb1db4f3ee3d5ce7a01bada45ce
2020-08-24 22:17:17 -07:00
Odelu Kukatla
3fd626f927
dt-bindings: interconnect: update interconnect bindings
...
Update the interconnect device bindings. These devices can be
used to describe any RPM and NoC based interconnect devices.
Change-Id: Icbeefc5dcbe0b1f8d0db8d429c7db3a4da20b71c
2020-08-24 22:16:42 -07:00
Ram Chandrasekar
2d2cfee8db
ARM: dts: msm: Update GPU thermal rule for lahaina
...
GPU thermal mitigation configuration uses a virtual sensor, which will
estimate the max of two GPU sensors. Change the GPU thermal rule to
directly use these individual sensors in two separate rule to achieve a
better thermal control.
Change-Id: I05ab74fd63657cefd6b251cf6528e74adf4e636d
2020-08-24 15:38:47 -07:00
Taniya Das
27aef351c9
ARM: dts: msm: Add interrupts for Limits for HOLI
...
Add the LMH interrupt which are required to be registered to receive the
interrupts.
Change-Id: I2d1ebb9adc89fffcb5d7786eaf9f8750334d02fb
2020-08-25 00:38:29 +05:30
Prudhvi Yarlagadda
4160d16d25
ARM: dts: msm: Add alias for uart nodes for shima
...
Add alias for uart nodes in shima. This is needed to get the
hsuart bluetooth usecase node as ttyHS0. And alias is added
for console uart node also.
Change-Id: I194c40f5ce15824c2460b5f282fb06051db416f5
2020-08-24 17:33:19 +05:30
Prakash Gupta
a3db9a0c02
ARM: dts: msm: update apps smmu actlr settings
...
Update apps smmu actlr settings inline with SMMU HSR v5.
Change-Id: I4bc8462af47494fb6bfbc65aefc0008fc69ce3ee
2020-08-24 15:09:48 +05:30
Tao,Zhang
2985bc061b
ARM: dts: msm: Increase the size for scandump on shima
...
Increase the size for scandump ids from 0x1a4c0 to 0x40000 on
shima.
Change-Id: Ia522487d7eec3a94a636137681df8650f25c1c94
2020-08-24 14:41:53 +08:00
Kiran Gunda
c79682e5e9
ARM: dts: msm: Modify the "init-voltage" of PON rails for shima
...
Setting the "init-voltage" of the PON rails less than the default
voltage leads to momentary voltage dip on the regulator output.
To avoid this behaviour, set the "init-voltage" to a default
recommended value. Also add ACTIVE_ONLY and SLEEP_ONLY nodes for
LDO1C and LDO10C as per the clients requirement to vote for
ACTIVE and SLEEP votes.
Change-Id: I1e83e47a97cc013bbc1d5bc8c48cbe253b5932eb
2020-08-24 12:08:20 +05:30
qctecmdr
8c41e5b755
Merge "ARM: dts: msm: enable dcc on holi"
2020-08-23 08:38:11 -07:00
qctecmdr
0e0a1e2c77
Merge "ARM: dts: msm: dtsi changes for holi"
2020-08-23 08:38:11 -07:00
qctecmdr
4c587de969
Merge "ARM: dts: msm: Update wlan configuration for holi"
2020-08-23 08:38:11 -07:00
qctecmdr
8148e596cd
Merge "ARM: dts: msm: Add touchscreen device node for QRD holi"
2020-08-23 08:38:11 -07:00
qctecmdr
313208bb23
Merge "ARM: dts: msm: Enable SMMU S1 for USB on Holi"
2020-08-23 08:38:11 -07:00
qctecmdr
52ef11c98a
Merge "ARM: dts: msm: Add gpu speed bin property for holi"
2020-08-23 08:38:11 -07:00
Vangala, Amarnath
a6af28860b
ARM: dts: msm: fix to indetify proper adsp variant
...
correct the fuse value read to identify the adsp SKU.
Change-Id: Ib100712ece632d09d43f9047a7e3ddd474170f29
2020-08-23 11:31:48 +05:30
Shyam Kumar Thella
aff0ffb179
dt-bindings: power: Update QG compatible strings and add IIO channels
...
Update QPNP QG compatible strings to distinguish between QG on different
PMICs.
Change-Id: I0eb19769b02143bef67fa934921e2dc420367003
2020-08-22 15:17:54 +05:30
Mao Jinlong
f631221f2e
ARM: dts: msm: Add llcc_1_dcache dump node for lahaina
...
Add llcc_1_dcache dump node to support llcc_1_dcache register dump.
Change-Id: Ie34bbce73ac2db8a25599c9035dc48d79a9d149a
2020-08-22 17:44:14 +08:00
