CLI parade touch need to do suspend and resume when receiving
suspend and resume notifications from display module.
Change-Id: Ibcb2e10f5974b9e546b9ffd0aa2ead3d106e4a0d
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2200231
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Support receiving dual-screen notifications to support
touch ic suspend and resume.
Change-Id: I2af3fb7632ca164c85626957f42c0d3dca2af179
Reviewed-on: https://gerrit.mot.com/2188839
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: <zhuwg1@motorola.com>
Submit-Approved: Jira Key
After the thermal temperature reaches 39 ℃, the battery voltage will be limited to 4.1V,
and the whole charging process will go twice CV, resulting in excessive charging time
Change-Id: I33a36eb1329a3cb207bb8a20349a4045520142d1
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2201513
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: gaoyx9 <gaoyx9@motorola.com>
why:
Let focal's hal to control the log level
Change-Id: I922c39340bab392a51f2fb08d7a28b4f594713e8
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2201521
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
Add NFC ST hardware detect code
use ST_NFC_HW_DETECT macro to open this feature
a sys node under i2c device node will be created to show which
chip is in use, support both dload mode and route mode
support both ST21J chipset and ST54J chipset
Change-Id: Ie69ea44e33b25a32d53d260c10414b4939389cc2
Signed-off-by: zhuangnk1 <zhuangnk1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2191006
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zishang Zhou <zhouzs1@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Qiang Nie <nieqiang@motorola.com>
1.enter charger mode when usb plugin;
2.create ito test failed file when ito test fail
Change-Id: I33e8a05a4dc4a81200406751ad8480a1a97993b9
Signed-off-by: huaqin71 <huaqin71@motorola.com>
Reviewed-on: https://gerrit.mot.com/2200364
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
This reverts commit 46abea9fb423a06c294ca7612ae11708561dc485.
this change has broken the multi point function
Change-Id: Idc9e912912bbd5a520f8b6d1ba8889820f0a6cad
Reviewed-on: https://gerrit.mot.com/2199829
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add module parameter to enable panic on delta_vbat when the
paired battery delta_vbat exceeds threshold of paired battery
load off state.
The panic is enabled only for engineering devices, and disabled
by default.
Change-Id: I0afe222c59e155af507e53e7ede6ede31ddf367a
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2196448
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
For build error from 8450 postCS6:
9573 ERROR: modpost: module parade_tma5xx_mmi_core uses symbol kernel_read from namespace VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver, but does not import it.
9574 ERROR: modpost: module parade_tma5xx_mmi_core uses symbol filp_open from namespace VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver, but does not import it.
Change-Id: I14cf7ee5284f2fbd378643262db7840da52bf7cf
Signed-off-by: a7301c <a7301c@motorola.com>
Reviewed-on: https://gerrit.mot.com/2195084
Reviewed-by: Qing Chang <qing@motorola.com>
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
This is a dynamic adjust battery voltage
for cyprus IP8
Change-Id: I8ac9acb903cf6418d28969fa9cef996529663275
Reviewed-on: https://gerrit.mot.com/2195453
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1.fix The first time the battery be inserted, the power display is low
2.reduce the time of temperature update
3.enable delay-shutdowm feature to set showdown voltage to 3.4v
4.enable SOC_SMOOTH_TRACKING feature to set show battery capacity 100%
when the real power is 97%
Change-Id: I96d88ce6e4d475a02005234f42a0f4943184bb94
Reviewed-on: https://gerrit.mot.com/2192328
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Configure the paired battery load according to the paired_ichg
which comes from the delta_soc mapping for paired battery voltage
and soc balance.
Change-Id: I8b4c5b0f95bec1656a96dfaf060d6b593052bfaa
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2192804
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Change calibrate/cm_panel/auto_shorts nodes from debugfs to sysfs
for CLI touch factory test,because debugfs is not used in user build
version and these nodes can not be used.
Change-Id: I129e2137a261e976c8ea81bc5acdd0042423cfd6
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2192076
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Driver will log the last touch down event timestamp and expose it via
sysfs. This feature utilized by sensors to mitigate false detection of
back tap gestures.
Change-Id: I53db8f1311275ef54c795de7f4f3ed350ed37842
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2190470
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Eric Hefner <ehefner@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
As "turbopower connected" appears twice, so report power max
30W when usb type is qc3p.
Change-Id: Ife81a9763022d74079b091eed0b33c535885e57b
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2181964
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
The firmware of aw96103 and aw96105 is same,
remove the firmware vesion check for the compatibility.
Change-Id: Ie460a853836da3de88d35066c0b5a5d90f2002f0
Signed-off-by: zhangh12 <zhangh12@motorola.com>
Reviewed-on: https://gerrit.mot.com/2189877
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add zero tap finger up event for framework to improve
FOD zero type performance.
Change-Id: I35bae1931121431943e0a991a2adfd5cc47f8a7d
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2186508
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add main battery power supply to support main battery
property read in multiple batteries products.
Change-Id: I73c89fc4795ad0ae299460ed616b7d07d5a66ca1
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2189094
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Add paired battery notification to limit the battery
load to system power and charging speed.
Change-Id: Ia416fe0b69bb6535e2874f518dcbb8d534dc3039
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2186534
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Add paired id used to support multiple batteries notification between
reference battery and target battery.
Change-Id: I2e1d991d055834a68c38eb7372c7fae17eb297e1
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2186431
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
qc3p begin charging
voltage to 3V.
Change-Id: I9aa1f563930da1d2e2ac876c5757c960ec63be08
Signed-off-by: xuwei9 <xuwei9@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2180078
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
