Add memory region for pll_codes on Lahaina, and the pll_codes
are used as trim_codes for RFI.
Change-Id: Ib1f8d59cc0c3e17a4c9f21894504e1be897a0480
Signed-off-by: Bruce Hoo <bingchua@qti.qualcomm.com>
This change adds smmu devices as separate devices so that
driver waits for these devices to bind before using any smmu
operation. This fixes recent stability issues where devices
were not probed during the dpu hw initialization.
Change-Id: If605ae258b0fc4a314e142b185d6d4553ed30b07
Change adds regulator-boot-on property to the GPIO controlled regulator
so that the GPIO doesn't get toggeled during boot from UEFI to kernel.
Change-Id: Ib0600ff5177de467e27f9efd09da623dc1c238a4
Add new boolean property that specifies whether the panel is
using DSI CPHY. If this property is not set, default PHY
type i.e. DPHY will be used.
Change-Id: I82e1738e64027e74a7752996c28b10ebdfdf3e15
Add a reference to the altmode device for use in the DisplayPort
driver. This update is necessitated by a change in the API for
altmode client registration.
Change-Id: Idaef5fab963b4c280873d30bb424cbe3e26c7419
Add device node for the MSM HDCP driver which manages
communication between HLOS and TZ for HDCP related operations.
Change-Id: I7b37814f1ade7f62cf73e196c834da400abba5fe
Increase the maximum number of DSCs available for DP usage to 4.
This will allow 4LM topologies requiring more than 2 DSCs
to be supported.
Change-Id: I9b5c3c9b460a537ccdb84dd7a72d6b7218a4cae0
Add documentation for scaling linewidth property which defines
the maximum linewidth supported for scaling use cases.
Change-Id: Ib02ab7cf1281b4e50bcc063ac5f45112caab2576
This reverts commit 658f1491b962fceccb622a9ba78e74af3c1fc0f0
from msm-4.19 which was ported as part of the display device
tree techpack.
Support for sde-limits has been removed from the driver as it's
no longer needed. BW limits have moved to per target based XML
files in user-space and linewidth limits already have other
properties for specifying.
Change-Id: Idcbe8e10e94785bc5774a94e2326d2f77ce4b5ac
This change adds documentation for pm_qos mask for performance use case.
Change-Id: I8ca41b578accbe6cc67041a5abb91b0d63fbd07d
Signed-off-by: Narendra Muppalla <nmuppall@quicinc.com>
Change adds all the supported DSI panels to the Lahaina MTP and QRD
platform devicetree. These panels can be chosen on these platforms
to run in simulation mode.
Change-Id: Idd73668c09b2f3c12e785aad7fe6f20e7cbdde79
Set 60hz cmd mode as default display panel mode, and
enable ESD check for cmd mode. Changed the PHY timing
settings according to the new PHY timing excel version.
Change-Id: Ib026bb19595a7f30bc7b2a36ac5eeb02749b043e
Change updates PHY timings of Sharp QSYNC CMD and VID mode panels as per
latest HW recommendation.
Change-Id: Iaf4b886b04fcc527df3986f70cf47538eea463ab
On Lahaina based targets the DB LUTDMA enGine now supports the
new LUTBUS DMA operation. Update VIG Gamut version to indicate
the LUTBUS operation is now used for DMA programming.
Change-Id: I0979be7aaaec6b8a45fd44d40523bc459dbe948e
Provide bus scaling griffins for the SDE AHB path. These values
are now moved to the device-tree for scalability.
Change-Id: Ic23aa5534ab0ccb1838355d6c0f9d10e9d76489c
This change enabled widebus support to DP so that the DP controller
processes 2 pixels per clock in uncompressed mode or 6 bytes per
clock in compressed mode.
Change-Id: Id6b316f818b5424e3684bef99ec8e40d8df83b85
