Enable SPS driver for Lahaina GKI version.
SPS (Smart Peripheral System) enables the support of
all BAMs in the system which provide DMA
functionality to various peripherals.
Change-Id: I5eb575d594bbd2c4858f224fcd40f1c2a04643f7
Signed-off-by: Ajay Prathi <aprathi@codeaurora.org>
Initialize a local variable before referening it.
Change-Id: I469eb892b418fb1906ebf4c093ac28d249412cdd
Signed-off-by: George Shen <sqiao@codeaurora.org>
In order to catch the issue immediately, assert when power on retry
for PCIe resume reaches maximum.
Change-Id: Ie370e031e68721b531aae909f56bc45b9d9b59d8
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Print after successfully assert/de-assert WLAN_EN GPIO for
debug purpose.
Change-Id: I3094252cf2f14d7a5e438ea8a8983b9b30fc75ed
Signed-off-by: Yue Ma <yuem@codeaurora.org>
This config enable the support for scsi generic driver.
Change-Id: Ib895134d3bd1635f612b9254900162160fbd67ea
Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
Add master and slave ID constants for all Qualcomm Technologies, Inc.
Yupik interconnect providers which consumers can use to set bandwidth
constraints and find paths in the NoC (Network-On-Chip) topology.
Change-Id: I0098d170786dacc3869485b86917b1a0a7491bfc
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Add pcie logs to identify any possible latency in enabling
regulators, clks and icc as part of DRV resume.
Change-Id: I3cb72ce22773f0b6b52c9e704c9ec9a3a1de3d8c
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Change for fixed link speed.
Change-Id: If2584bd534b868171d53b0b880d65cc2eeb74410
Signed-off-by: Mohammed Siddiq <msiddiq@codeaurora.org>
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
Use the property INPUT_CURRENT_LIMIT to suspend and un-suspend
USB and DC paths.
Change-Id: Id0636e7c792c63156597d5db4e9087bd5fdc262f
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
This enables the detection of VBUS going high or low on sdxlemur
platforms where USB peripheral uses VBUS_DET peripheral from PMX65.
Change-Id: I0a30944de02403ed7b777380c3e75708f033a5bc
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Add support for sdxlemur CPU clock driver for
controlling cpu clocks.
Change-Id: I02325424dabfe96f7357844cb69a368fc04afba9
Signed-off-by: Naveen Yadav <naveenky@codeaurora.org>
Add support for and enable and disable ops for regmap_mux_div clk, also
support for safe source for regmap_mux_div clock to park the clk to safe
source while disabling and restore to active rate when clk is enabled.
Change-Id: Ida765ec1853c2bdd17b6fce3e8012e294f4324fe
Signed-off-by: Naveen Yadav <naveenky@codeaurora.org>
Add support for "parallel" power supply which is not present in 5.4
kernel through IIO device and properties under it through IIO channels
under the IIO device.
Change-Id: I2f7fe8d96080ea927f1349a6742cd4e0a6ffc290
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
Signed-off-by: Ashish Chavan <ashichav@codeaurora.org>
Get IIO failure may occur due to parallel charger's iio-channel
names conflicting with main-charger/qg channels. Fix this by adding
"pl_" prefix for all parallel charger's iio-channels name.
Change-Id: I20cb8f984b38d7053890380ea024a2ef15cf5789
Signed-off-by: Ashish Chavan <ashichav@codeaurora.org>
If the current partition type is RPMB, clock switching may not
work properly. In this case, clk scaling up would be skipped but
clk_scaling->target_freq has been changed and then discard sub-
sequent clk scaling up requests till meet scaling down. Changing
judgement condition clk_scaling->target_freq == *freq to clk_scaling
->curr_freq == *freq in mmc_devfreq_set_target to avoid this issue.
Change-Id: Id0636e7c792c63156597d5db4e9087bd5fdc2621
Signed-off-by: Ziqi Chen <ziqichen@codeaurora.org>
Currently IRQ APIs are combined with notifications to VMs for sharing the
handles. This limit the clients for managing the error handling from the
drivers. Hence separate the notifications from the actual APIs so that
clients manage the error handling better. Add support for notifications
like IRQ_LEND/ACCEPT/RELEASE from SVM to PVM when SVM accept the irq
handle shared by PVM.
Change-Id: I49999c2d9494c68b1542680e521c012a25e3f6a8
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
For firmware and RDDM images, notify MHI driver not to free them after
successful allocation. This can help avoid future memory allocation
failure.
Change-Id: Ic19d42c6d56707200099969e36da91f4afed0163
Signed-off-by: Yue Ma <yuem@codeaurora.org>
