Virtual PM Group resource type has been added to the list of
hypervisor resource types that can be queried for by a VM.
This addition is in preparation for the hyp core ctl driver to store and
utilize the information related to VPM group such as cap_id and
VPM group state in relevant hypervisor features.
Change-Id: I4ec9b4dca5f095980b8ce9134c7cac695562f101
Signed-off-by: Sai Harshini Nimmala <snimmala@codeaurora.org>
The state information of the Virtual PM group can be obtained
through this API.
Change-Id: I0a00e8bfe38f7908ed20bc105f66149097e6532b
Signed-off-by: Sai Harshini Nimmala <snimmala@codeaurora.org>
Process QMI socket connection in DMS server arrival callback to avoid
MAC address setup failure on late DMS service connection.
Change-Id: I949b409e09afc7f98decc5f05912467df0d997b8
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
Add new path data types corresponding to changes in camnoc
architecture.
Change-Id: Idb4c37c7cf73a24550b6c94ab3fdfa3dde1cf70e
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Added support for IRC DCC for private clients
by avoiding NAT if the DCC client is a
private client.
Change-Id: I786724e82768317e4f511733bc9247e81d2b60a6
Signed-off-by: Paras Singh Jain <parassin@codeaurora.org>
Add crypto capability registers and structs defined in v5.2 of
JEDEC eMMC specification in prepration to add support for inline
encryption to eMMC controllers.
(cherry picked from mainline kernel_msm-4.19 commit 08093743).
Change-Id: I8a42be348ca06cffbe841e590c4348990c9d7a08
Signed-off-by: Neeraj Soni <neersoni@codeaurora.org>
Signed-off-by: Vaibhav Agrawal <vagrawa@codeaurora.org>
During audio subsystem restart, the audio driver will unregister
its notifier on shutdown and re-register when subsystem is up again.
If a regular USB device, and not a Type-C analog audio device, is
currently connected, we should not re-write the register settings
over I2C to the FSA4480 IC as that will make the D+/D- pins to
be momentarily switched off an on, which causes the USB controller
to detect a momentary disconnect and re-connect of the attached
peripheral.
Fix this by first reading the switch control and enable registers,
and if being updated with the same values, don't re-write them to
avoid unnecessarily resetting D+/D- or SBU1/2.
Change-Id: I9d4e092e9782ca64caf0982958b3e5d05744aa92
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Setting opmode to invalid values would lead to a
paging fault failure when there is an access to the
power_operation_mode.
Prevent this by checking the validity of the value
that the opmode is being set.
Change-Id: I9863df1e84a947fb04e29d214c1dec61ccc5ee72
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
This ensures that two concurrent writers through iptables-restore
cannot overwrite each other. Fixes the following-
<6> Unable to handle kernel paging request at
virtual address 006b6b6b6b6b6bc5
<6> [006b6b6b6b6b6bc5] address between user
and kernel address ranges
<2> pc : ipt_do_table+0x3b8/0x660
<2> lr : ipt_do_table+0x31c/0x660
<2> Call trace:
<2> ipt_do_table+0x3b8/0x660
<2> iptable_mangle_hook+0x58/0xf8
<2> nf_hook_slow+0x48/0xd8
<2> __ip_local_out+0xf4/0x138
<2> __ip_queue_xmit+0x348/0x3a0
<2> ip_queue_xmit+0x10/0x18
<2> __tcp_transmit_skb+0x734/0xaa8
<2> __tcp_retransmit_skb+0x5b8/0x930
<2> tcp_send_loss_probe+0x19c/0x300
<2> tcp_write_timer_handler+0x14c/0x238
<2> tcp_write_timer+0x74/0xa0
<2> call_timer_fn+0xc0/0x1c0
<2> run_timer_softirq+0x2f8/0xa30
<2> __do_softirq+0x1dc/0x384
This enforces the cleanup of the old entries under the xt_table lock.
CRs-fixed: 2612021
Change-Id: If721ceb7891e58847eae5c1ad9c5e9aea4c569e3
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Legacy targets don't use HFI dispatch queues so there is no need to "fix"
their dispatch queue ID.
Change-Id: I8444c41c18721198bee8501b8d0ef19ea2b0192e
Signed-off-by: Carter Cooper <ccooper@codeaurora.org>
Ensure we don't send garbage as the message data.
Change-Id: I35786a1a6d8c86a555198ae07d688048f5b6bc6c
Signed-off-by: Carter Cooper <ccooper@codeaurora.org>
When the device exits suspend/deep sleep in host mode with
peripherals connected, the peripherals and root hub failed to
resume because the xhci stack has not resumed yet, leading to
the re-enumeration of the connected peripherals.
Fix this by resuming the glue driver, core and xhci plat driver
un-conditionally as part of suspend/deep sleep exit.
Change-Id: Ie1cbe174aec04ddde5779ad4fabdf075cffa955d
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
To use block crypto based inline encryption mechanism
storage device driver should create a keyslot manager
and register it with device request queue. To achieve this
pass request queue pointer during host controller initialization
where request queue can be updated with keyslot manager.
Change-Id: I71f0005a1ad8867b6210e92878b8c112d436688e
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
Add compatible string in mailbox driver to match scuba and monaco
apcs_glb device node.
Change-Id: I5d07413485c73df769a7922e82eb4729321acb7b
Signed-off-by: Vivek Golani <vgolani@codeaurora.org>
If unload app was failed due to EBUSY, qseecom will not free
app list entry, but just restore app ref_cnt and return EBUSY
to client.
Change-Id: If7b20b52690a34ba9cf1b3c3e96f84583d221dec
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Currently USB remote wakeup functionality is not fully supported.
Hence set remote_wakeup_allowed to false instead of setting true.
This helps to disconnect USB IPA GSI channel instead of suspending
on getting suspend interrupt when USB is enumerated into high speed.
It prevents getting any unwanted remote wakeup from IPA which is
racing against USB LPM functionality causing unclock USB controller
register access while handling remote wakeup.
Change-Id: I1691e3989b9d008ea541a51dd51aafca116fe0ff
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
