Add new GPU chip id and required code to
Support A619 GPU.
Change-Id: I9b4e8b35e536486c63661b050a2242538d873c2d
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Add support for CDSP DCVS and CDSP hardware cooling devices to QMI
cooling device driver. These cooling devices can be used to mitigate
CDSP subsystem at high temperature via qmi interface.
Change-Id: Ia9906b07ebca4bd6158b68e6e100405ebaa30b60
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Do not hard code resource address in PDC initialization
sequence to avoid incorrect configuration. Instead get
resource address from cmd-db driver.
Change-Id: If2cc8378c1c00304033d726fdb8bd4e8690ef110
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
Data read over SPI was guaranteed to be in a full burst size. This change
enables FW to raise the Data Ready DRI earlier, before the full burst is
ready. The driver must handle the case where data size reported by the HW
is less than a full burst, and then execute another iteration until the
whole burst is read.
This change causes a performance optimization, since the FW can raise the
Data Ready DRI earlier. The whole burst data is usually in place when the
driver handles it.
Change-Id: I98966ec5c1ef614c3c145e99bb3327febe1ebe74
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Return -ENODEV in case a change_mode command is issued when the system
is in SYS_ASSERT state. This guarantees that the user space application
is aware of the bad state and waits for the FW_READY event.
Change-Id: If26dc115078a3cd1af5d7efa93225019c1105184
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Impose less restrictions on state changes, as required by the new system
design.
Change-Id: I9ea6d2fcf2bde4dd013cf7c494dcb5c0c4948fd7
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
In case user space application requests for data size which is not a
multiple of the burst size and there is enough data in the drivers internal
buffer, a partial burst may be read by the application, which may cause
loss of burst boundary.
This patch fixes the above. In case the application supplies a buffer which
is smaller than the burst size, an error is returned to the application.
Change-Id: I5233476d99937dd1a13ceaec625588414a1dc04a
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
In case sys-assert DRI is pending, there is no need to process other
pending DRIs.
Change-Id: I3f1422d75ae5d966c855213031b3524c46d7f5d5
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Prevent state changes during DRI handling, which may cause the driver to
get out of synchronization. Prevent data read from user space and from
kernel space during change_mode processing.
Change-Id: I2ee277c8894996119d13acbe87a5163e4064923c
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
change_mode command sometimes fail. In such a case, a proper error code
should be returned to the calling user space application. Otherwise, the
application tries to read data, which is not available.
Change-Id: I03778cace54fd98847a099bbeaf7884cfbaac586
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Driver can now send asynchronous events to user space application.
Available events are RESET and FW_READY.
Change-Id: I8b3819927ac3e55b69be03d288600c81ad23e319
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
32 bit SPI transactions are more efficient. Additionally, the data is
received in the correct endianness, as expected by the host, therefore an
endianness flip can be avoided.
Change-Id: I35c0be291c971d5f07a00e79923c2050914d9642
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
WIGIG_SENSING_IOCTL_GET_NUM_AVAIL_BURSTS returns the number of available
bursts in the drivers buffer.
Change-Id: I474770a817393e1b64831886803d65a3f76d92e0
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
This driver adds support for sensing use cases over 60GHz frequency band.
Sensing uses 60GHz radio signal to 'sense' the environment, allowing
various use cases such as proximity detection, face recognition, gesture
detection and more.
The driver communicates with the QCA6436 HW using SPI bus. The driver
requires SPI and wil6210 drivers to operate.
Change-Id: Ieaae89de8ef77617a24efafea0f476a3546cf27f
Signed-off-by: Gidon Studinski <gidons@codeaurora.org>
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Fix a potential out-of-bounds write into fw image name array.
Change-Id: I646587bcb421c427208d37aea3d231336ec76627
Signed-off-by: George Shen <sqiao@codeaurora.org>
An incorrect failure check needs to be fixed in the bandwidth
scaling initialization function as the absence of the supported
event ring support does not get factored in.
Change-Id: If80e5126821bc4c9223fe37c4403935a6b1bf047
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
While writing any sequence or session identifiers, it is
possible that the host could write a zero value, whereas only
non-zero values are supported writes to those registers. Ensure
that host does not write a non-zero value for those cases.
Change-Id: I33248a0aa43321c85a107e394f953774140dec50
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Execution environment and power off changes can be serialized
to avoid changing these important controller variables from
multiple places and serialize handling of all state transitions.
Change-Id: I394e5ff4992d7c911e3889f96057d8467d79509c
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
PCIe root complex driver has exposed set of APIs to allow or
prevent link level low power modes. Use those instead of
touching device side registers to toggle the same.
Change-Id: Idf4f6d60a80742524249dacd7a10fe5184acec95
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Large strings are truncated to 255 bytes by IPC logging API.
Allow for them to be printed in their entirety by using the
string separator API and split it using newline as the
delimiter.
Change-Id: If9ddbad7e9a9c30da57a733c94fb837c120f12ae
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Remove the unused timesync MHI device as we use the controller
device for timesync related activity instead.
Change-Id: If2bb5937cbf468d8778b89549afdb1d0a9af7782
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
