we can modify ui_full to adjust showing 100% limit
The default ui_full is 100, that is hard word.
config it to dts file,that can suit for muti-project
Change-Id: I6aa2e7567e2ed91a8ac1c24be53c5aa471a4c7e7
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2124577
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- Check if panel is available, if not, don't probe, save boot time
- Set avdd to 3v, same as other touch driver.
Change-Id: I34711276c2e5efcf1acc9421db2e347d95f2b41b
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2131131
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
fg data can't update to user space timely, because fg driver only power
supply change the bms psy. So need to change to battery psy to update
data.
Change-Id: Idd39efd3790b6e80b473a8048827663d5a61851d
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2131783
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
tcpm_inquire_typec_remote_rp_curr is only used when kernel version < 5.4, which
is referenced in rt-pd-manager.ko.
Change-Id: I512071ac39537276701cb17261a03f58a7f14b48
Reviewed-on: https://gerrit.mot.com/2130450
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
There is a case that will make the system suspend failing for
mmi,charger wakelock and last for several minutes.
The reason is that the system suspend has the same 60s request
intervals as mmi charger heartbeat delay work, which will request
mmi,charger wakelock.
To avoid this two task run into resonating state, it's feasible to
change the mmi charger heartbeat interval to 100s.
Ported_from: (CR)
Change-Id: Ic24bfc8a4291761f4681e0464e7afd94b9239bd2
Signed-off-by: mahj8 <mahj8@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2129919
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Vijayakumar Gn <vijaygn@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As VTS test failed, need to modify battery capacity unit
from mah to uah.
Change-Id: I04b24e6d564917b1a0af06c12eeec5351ae38048
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2130441
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As moto charging FULL status judge in SW policy, so we must remove
FULL status in charging ic driver.
Change-Id: I881b1464bdeb9e9c6599dee15d33189c6b4d1594
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2128758
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Ironmn cold-boot with charger or usb connected tocharge port is
identifying ps_prop_usb_type brickid, apple charger. fet_control
was not handling this charger type. Why the incorrect detection
is happening needs to be investigated, but battfet control will
now handle all usb_type cases.
Change-Id: I5356ee108e2a2430b434311dd5b2cfaa225b89ac
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/2128139
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Add shutdown procedure for WL2864C and force disable all regulators when
system power off to avoid unexpected current leakage.
Change-Id: Ia92782a7baa2599fd6be1a7c62d5f747f10340ae
Signed-off-by: chenglong1 <chenglong1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2128240
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Wang Liu <liuwang2@lenovo.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: <huqian4@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
As some discrete charging ic can't suspend usb, so need to disable
charging when capacity > upper_limit. I think it don't effect any scene
in pmic charging solution product.
Change-Id: I2f794cd81371169ea29e2e2918ad47430132415f
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2128317
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
request pm_qos during the interrupt processing to prevent
the CPU from going to sleep state.
Change-Id: I95728329c7df7a4376415b9d8ec20d6525fe45c8
Reviewed-on: https://gerrit.mot.com/2124280
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
As change the get vbus voltage api from BQ25890 to Main PMIC,
so need to change the HVDCP voltage standard
Change-Id: I5e175b0a5019b3b69810539f21c11b1a26764f84
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2126099
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
As TI bq25890 chip accuracy issue, so when policy set icl >=3A,
we need to set 3250ma at register for BQ25890H
Change-Id: I74cd75fdae300b50a8a9581b751dff6890258e11
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2125735
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Add tx_mode and rx_connected
this is to support moto wireless powershared
Change-Id: Idb36fdfb10fa9cbe4015f6c4ecd1f6c6e74deb26
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2111245
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
rt9246a fcc value is part of its algorithm,
fcc value will change according to the condition that the battery is 100%,
https://gerrit.mot.com/#/c/2121340/, the fcc value from 4895 change to 4654.
that isn't our expect. the fcc_design should be a const value
so we add another dts to config it.
Change-Id: Ibc4947e8671243f831e4d6dc160cc8c71873a594
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2121919
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
rhodep camera use new power IC et5907,
add et5907 config files.
Change-Id: Iecca4e840632453d6ace8223b6e9cc36f421fccc
Signed-off-by: Xiaofeng Wang <wangxf32@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2119188
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: <liuzy55@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
TP:
If the noise detection fails after calibration, the touch IC will
report the "F3 E0" event, and when the event is received,
the touch driver will send the calibration command again.
Change-Id: Ifd2f4bd287fbdc7861a127d2ffd481f635d963c7
Reviewed-on: https://gerrit.mot.com/2123149
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
request pm_qos during the interrupt processing to prevent
the CPU from going to sleep state.
Change-Id: I78a67ef1aa9a363e9d7f9546b8d4c20a81ac04c4
Reviewed-on: https://gerrit.mot.com/2107618
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Change the build make file to be compatible with
Android S build.
Change-Id: I9faf66a92f1d4c4bb32b6069d9ed4b9e08f66392
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2117635
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
11-06 10:22:19.922 0 0 I rt9426a 1-0055: RT9426A block read 0x2c fail
11-06 10:22:19.922 0 0 I rt9426a 1-0055: SOC(-13)
11-06 10:22:19.922 0 0 I rt9426a 1-0055: RT9426A block read 0x2c fail
11-06 10:22:19.922 0 0 I rt9426a 1-0055: read soc value fail
QC holi project can't permit do i2c test when phone into suspend or resuming.
The failure of I2C operation jointly produces many unexpected behaviors,
including but not limited to the negative power number and serious power jump.
when calling to the fg_update_work_func(),
avoid the system into the suspend.
Change-Id: Ideeecffc1abe6e7eed12173c7a589cf1f3dc1b22
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2118864
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
when device screen off, the wallet running slow and some time
nfc service will reset.
remove IRQF_NO_SUSPEND feature on driver to avoid issue
Change-Id: I1828ce8293915b288020595fa3d2a992503c90a8
Reviewed-on: https://gerrit.mot.com/2119768
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ningkai Zhuang <zhuangnk1@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Some units may panic on charger cable insertion at powerup. Seems
to be a race condition either registering the ps notifier, so remove
the call. This will reduce the reaction time to check for overcurr
condition at time of charger application.
Change-Id: I71e00636630605e393334e2c8424dfadd2913566
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/2115456
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Re-instate the original commit back into mainline to validate.
This reverts commit e5433a437a06221b577d0b54c4e4936d317e4c1e.
Change-Id: Ida06a55eee333d31fb0f0f212daed74c11c790b9
Reviewed-on: https://gerrit.mot.com/2118107
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Bernie Moreno <berniem@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
TP:
Support Pmk8350 gpio3 as the stylus clock for Rogue PVT, and the
output frequency is 19.2Mhz.
Change-Id: I5dae054b6170b921b7afee1853b7de7995531705
Reviewed-on: https://gerrit.mot.com/2111742
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
In COM kernel panic. Kthread max runtime is 0.95s, but we use
mdelay 1.5S, it will kernel panic. So change mdelay to msleep.
Change-Id: I643df7edc75b8640ff6a5d2aa90106e378e0df9f
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2117321
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As cyprus IP68 SW terminate current is 150ma, so HW
termination current need set below 150ma.
Change-Id: Ib52492992495e03945943b18363ea58f1cf6a49f
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2116841
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
