Not all platforms are same imem address.
Change-Id: I570ea34c96d928de6f0cf83b13a5d02757693d30
Reviewed-on: https://gerrit.mot.com/1207825
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Factory Kill was being tripped when USB is suspended.
Fix this by checking USBIN Voltage when in suspend rather
then the online status.
Change-Id: I138db13c0e14b29d887a0dda0dbfdb1d4deffaef
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1206691
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Curtis Porter <porterc@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
The CSPL_CMD address may change depending on the firmware/chip revision.
This is now handled by assigning the correct address in probe based
on the chip's revision ID.
Mot-CRs-Fixed: (CR)
Change-Id: I4d0e4cb80dabe7cc98475b444471c42df96566fc
Signed-off-by: Adam Brickman <Adam.Brickman@cirrus.com>
Reviewed-on: https://gerrit.mot.com/1204800
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1206183
In order to ensure that dynamic drive.ko can be output
/vendor/lib/modules, define a new macro DLKM_INSTALL_TO_VENDOR_OUT
Change-Id: I0aad283865f5831e577c388a214174db645ed63e
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1204366
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Use the smem.c modules to access shared memory,
qcom has removed the msm_smem.c api.
Also delete socinfo. It requires too many exports in the
kernel and l(CR) won't be missed.
Change-Id: Icd31bf4862b45758ced4c98f7fe35112a092b56e
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1201411
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Remove DAPM routes for ASP TX widgets when zero-fill
is selected as the source. "Zero" should be selected
for the ASP TX source whenever that channel is inactive.
For example, when capturing one channel of data from
each amp in a stereo setup, ASP TX2, TX3, and TX4 should
all have source set to "Zero".
Change-Id: I2d1c81307f8d88c4676f458fcfdbfa6a0bcbf750
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202255
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
If a control is written between preload and core enable, the value
doesn't currently get synced on the bus when we start the DSP.
SQA-991
Change-Id: Ie41c83150a40eae870b529fe319bf03bc20630c1
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202254
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Wait for OTP_BOOT_DONE as the first operation
out of reset. This is to facilitate B0 parts that
may have DEVID programmed by OTP.
SQA-856
Change-Id: I43484188c74aa0ae3bebcfdafe6f87e5cbe8bd25
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202252
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Corrected or removed various register defaults
and added GPIO status as volatile.
Change-Id: I9e0eabed1864a56f4a3645a569f6914200ef0761
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202251
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Adopted use of dev_get_drvdata within suspend and resume callbacks
for both timed output and LED trigger flavors.
Change-Id: I3e18a50b85d2cd8972b1c4abdb1f521f112fa661
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202249
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Added a safety check to retry writes to ENDPLAYBACK in the
event of an I/O error, parking the device in a reset state
following multiple failed attempts.
Change-Id: I4847f81ee7809b5a0bd0f86f65c631f8dc7d65ec
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202248
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Added a safety check such that all non-zero values written to the
comp_enable control are translated to '1' when passed to the DSP.
Change-Id: I359def9737eeb8e1f77abdd76ce8d7a3ef069ee5
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202247
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
* Added a sysfs control for enabling and disabling GPIO1.
* Added a means to disable GPIO1 by default based on a device tree
entry.
* Added a means to automatically control GPIO1 as a function of the
host's power state based on a device tree entry.
* Updated the minimum supported firmware revision to 4.2.0.
Change-Id: I654da852bc9982cbc6628666b82141363651ea72
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202246
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Added errata support for updated IMON temperature coefficient trim
values and TEMPMON gain/offset trim values (revisions B0/B1 only).
Change-Id: I830f177d5462bb8c3764c6b63f4f2e91bf67e754
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1202244
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Add focaltech driver into dlkm.
- The dependency on CONFIG_TOUCHSCREEN_FOCALTECH*
are removed in the driver
- Add focaltech,fw-update-mmi in dts for moto firmware update
process
- Changes related to resource release to prevent kernel panic
Change-Id: Ib38c51969e58f827e2996de1a0550bade39036e7
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1200328
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Add the dlkm for mmi control over the qcom smb charger.
This initial drop only gives access to the factory
interfaces but over time will be granted more control
over total system charging.
Change-Id: I408a4e36dab976697d1f98499bf33b6378deaf96
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1200750
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Add the driver to talk to the muc via uart.
Change-Id: I4f2b0b1a99d6834b668a15c594ccd4f0188a8eaa
signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1174586
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Enable the ref clk when the codec is not in reset.
Mot-CRs-Fixed: (CR)
Change-Id: Ic6d0d3f869621b193747f7ba309c2fb18b6a2573
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Reviewed-on: https://gerrit.mot.com/1197391
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
Create initial drop for MAX170XX which is based on
based on teh max17042 driver.
Change-Id: Ide3cd2e8fd0dc5585c0c10665873b66845b2c45e
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1197354
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Some targets may not use CS35L41 AMP. Do not default to the
SPI codec as it may break the build.
Change-Id: Ie5e0da0e9a7318a99480f97df73620ea51e11d28
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Reviewed-on: https://gerrit.mot.com/1196742
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key
DSP preload function adds "(NULL)" string to the control
name if a dsp suffix is not set. As result the control
could not be find. Zero lenght string will fix that issue.
Mot-CRs-fixed: (CR)
Change-Id: I9e8f88fb2ac10d7143b0434926dc9b589138c298
Signed-off-by: Vlad Karpovich <Vlad.Karpovich@cirrus.com>
Reviewed-on: https://gerrit.mot.com/1193402
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Function kernel_read prototype is different in kernel 4.9 and 4.14.
Adding conversion function based on LINUX_VERSION_CODE
Change-Id: Ic993ae91ddbc4db4608822009954208923abe205
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1194418
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
