Change the build make file to be compatible with
Android S build.
Change-Id: I9faf66a92f1d4c4bb32b6069d9ed4b9e08f66392
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2117635
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
11-06 10:22:19.922 0 0 I rt9426a 1-0055: RT9426A block read 0x2c fail
11-06 10:22:19.922 0 0 I rt9426a 1-0055: SOC(-13)
11-06 10:22:19.922 0 0 I rt9426a 1-0055: RT9426A block read 0x2c fail
11-06 10:22:19.922 0 0 I rt9426a 1-0055: read soc value fail
QC holi project can't permit do i2c test when phone into suspend or resuming.
The failure of I2C operation jointly produces many unexpected behaviors,
including but not limited to the negative power number and serious power jump.
when calling to the fg_update_work_func(),
avoid the system into the suspend.
Change-Id: Ideeecffc1abe6e7eed12173c7a589cf1f3dc1b22
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2118864
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
when device screen off, the wallet running slow and some time
nfc service will reset.
remove IRQF_NO_SUSPEND feature on driver to avoid issue
Change-Id: I1828ce8293915b288020595fa3d2a992503c90a8
Reviewed-on: https://gerrit.mot.com/2119768
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ningkai Zhuang <zhuangnk1@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Some units may panic on charger cable insertion at powerup. Seems
to be a race condition either registering the ps notifier, so remove
the call. This will reduce the reaction time to check for overcurr
condition at time of charger application.
Change-Id: I71e00636630605e393334e2c8424dfadd2913566
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/2115456
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Re-instate the original commit back into mainline to validate.
This reverts commit e5433a437a06221b577d0b54c4e4936d317e4c1e.
Change-Id: Ida06a55eee333d31fb0f0f212daed74c11c790b9
Reviewed-on: https://gerrit.mot.com/2118107
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Bernie Moreno <berniem@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
TP:
Support Pmk8350 gpio3 as the stylus clock for Rogue PVT, and the
output frequency is 19.2Mhz.
Change-Id: I5dae054b6170b921b7afee1853b7de7995531705
Reviewed-on: https://gerrit.mot.com/2111742
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
In COM kernel panic. Kthread max runtime is 0.95s, but we use
mdelay 1.5S, it will kernel panic. So change mdelay to msleep.
Change-Id: I643df7edc75b8640ff6a5d2aa90106e378e0df9f
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2117321
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As cyprus IP68 SW terminate current is 150ma, so HW
termination current need set below 150ma.
Change-Id: Ib52492992495e03945943b18363ea58f1cf6a49f
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2116841
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
The force vindpm bit will clear by itself when remove charger,
so need re-set force vindpm bit when use absolute vindpm.
Change-Id: I8c8c5747c3ee58b9394c35ca0c0f465cdb52064b
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2116766
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
TP:
Since the sensitivity node is a general node in the framework,
the judgment of the mode value is increased.
Change-Id: I82d2727e8ebd60c96c13edf2dd923630dc828290
Reviewed-on: https://gerrit.mot.com/2116173
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
We need to probe the nfc driver even through I2C
communication fail to make sure Force FW Download work.
Change-Id: I3a84bd7927ec01f4a663d332dd3551cd00c7a8f2
Signed-off-by: wuwl10 <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/2116211
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ningkai Zhuang <zhuangnk1@lenovo.com>
Reviewed-by: Jun Zhang <zhangj10@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
At present this change causing random Kernel panics. WE will investigate
in prallel revert change temporarily for stable dialy SW
This reverts commit 2e2fbc387e3aee0d96fbdbea9ebb7de64ad4b1aa.
Change-Id: I91374b0ff97a39b11fcf64e6cb1f8aaMontanaf89cf3
Reviewed-on: https://gerrit.mot.com/2115325
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Select close current value base on setting.
This logic is batter.
Change-Id: I5a456cc87e779edca326e7ddf563c42818adbda4
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2114858
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
1. Add the function of leather mode in the
univeral interface sensitivity.
2. The mode setting instructions are as follows:
mode = 0x00/0x01 Exit/Enter film sensitivity mode.
mode = 0x10/0x11 Exit/Enter leahter sensitivity mode
Change-Id: I35d49aaf225e8b941a4f2552a2ccd9d33a34dd92
Reviewed-on: https://gerrit.mot.com/2113437
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
sometimes vbus type don't equal to NONE, so don't request
dpdm, so qc3.0 can't be correctly identified.
we must request dpdm when charger inserted.
Change-Id: I68f48ac713e468250709a6788dddf57e460887d0
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2114459
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
orderly_poweroff is not supported in GKI2.0
Change-Id: I2fa959f0abdacb2188c054c46e1a05c8d8c9813c
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/2112840
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
add add qc logic wt6679f code for bring up
this code i2c can work normal,but function need bring up
Change-Id: I68e424ad6db2f12a70c1a59470b423035bf6cb67
Signed-off-by: huaqin86 <huaqin86@motorola.com>
Reviewed-on: https://gerrit.mot.com/2110593
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
sometimes vbus_type register don't be cleared by itself when
removed usb cable. So can not run charger removed code logic.
Workaround DSEL 47nf Cap HW issue of Milanf on TI BQ25890
Change-Id: I354bb10f46d3ffc59b949849b1f6e43eeae1e928
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2110861
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
If sometimes dm drop to 0V slowly, then vbus increase to 12V as
dp 0.6V dm 0.6V. So first drop dm to 0V and then drop dp to 0.6V.
Change-Id: I8db3b6273dd4be244b75513a0103a021719bf070
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2109927
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Lu Chai <chailu1@motorola.com>
Submit-Approved: Jira Key
Logic control for vbatt2 balance_en_n (gpio105), battplus_en (gpio90),
chrg fullcurr_en (pm8350b_gpio8) and vbus_ocp_fault_n detection.
Enable low-Z battplus_en when vbatt2 is within 200mV of vbatt_main lev
Otherwise, leave in balance_en_n path. Charge fullcurr_en dflt to
disabled (low) and set high on charger connect, with vbus_ocp_fault_n
logic high and mainbatt_current < 1C (2500mA). Full charge current will
be 5000mA for both batteries in parallel.
Finally, check for factory mode state or Not Charging + battplus_state
High. If either condition met, skip out of fet_control workfunc and
delayed work. Future charger detection will restart delayed work again.
Change-Id: I108f5d4e7382d67ad874db03f498dfeac729a9d2
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/2110359
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
If online prop is 1 and power supply type is MAINS, healthd will
think charger type is AC. So config charger power supply type
is unknown to avoid conflict with usb power suply.
Change-Id: I6e0baf4c40df1cc4f42d83b44bb918e2708a2bdc
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2108494
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Submit-Approved: Jira Key
User an orderly shutdown for factory kill instead of a
kernel power off. The orderly shutdown will attempt to
call the reboot binary from userspace first, and then
fallback to kernel power off if it fails.
Change-Id: I52bac148c92a2aaf6a3929b4c1a2709e4b3421af
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/2108688
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
1. Close the stylus clock when system suspend and the stylus
mode exits.
2. Add 16ms delay between each command.
Change-Id: I6dff47410315272167d47a733b1058736f72c737
Reviewed-on: https://gerrit.mot.com/2108295
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
The mobicoreDriver from Trustonic drop 410a-V108 was not including
the correct ion header when CONFIG_ION_SYSTEM_HEAP is disabled, causing
a build failure.
Change-Id: Ie324ba066fb1a487a13c86716af8a79a3ce3b16a
Reviewed-on: https://gerrit.mot.com/2107997
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
