Send charge rate uevent if power supply changes in case the
charge rate change uevent is missing by BatteryServices before
it starts up.
Change-Id: I4343454c54e30df1cbbc512d473b9061b10cbd84
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1964225
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Use ANDROID_BUILD_TOP instead of TOP. TOP does not appear
to work anymore.
Change-Id: I9ca1f85ced505488c205078febf6d954aa7e9bc3
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1928666
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
When using drm panel notifications, there is a problem with
the display and touch loading sequence, which may cause TP to fail to
find the active panel and thus fail to receive the display notification
So use panel notificaitons to avoid the issue.
Change-Id: I7269436bd8117db74467050d4cb839353efdf1a0
Reviewed-on: https://gerrit.mot.com/1962331
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Not defined CONFGI_PANEL_NOTIFICATIONS, so the module does not depend on
the msm_drm.ko, so there is no need to add the kernel symvers.
This reverts commit 976d0428b82bdf3b44b2affdc67a0e18f40a72e3.
Change-Id: If84d0e09157d13c6731df33ac032e7bee53d0e0b
Reviewed-on: https://gerrit.mot.com/1960482
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
The touch_set_state function will only be used when the
NVT_SET_TOUCH_STATE configuration is enabled. So add the
configuration to avoid compilation errors.
Change-Id: I832362899339c3465f475c13bb654a73216d8e9c
Reviewed-on: https://gerrit.mot.com/1960799
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Add 30W turbo charger type support to identify
the charger type with power more than 25W.
Change-Id: I4365fa695b859c8d6916336fc34c832ca1c1aa82
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1960683
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
When link binary object, touch_set_state is undefined,
No kernel symbal table was imported.
Change-Id: Ibd1cde478b08308d14fdba210ae3a61cd9887ff5
Reviewed-on: https://gerrit.mot.com/1957708
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
TP:
Support novatek single tap function in berlin NA.
Change-Id: I8f1d8d82b919b20fcba4812a74f247399a097ddf
Reviewed-on: https://gerrit.mot.com/1955575
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
When link binary object, panel_register_notifier is undefined,
No kernel symbal table was imported.
Change-Id: I539793e5aa2bd2d27d8ed9b959d9bef86739b26c
Reviewed-on: https://gerrit.mot.com/1957707
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Submit-Approved: Jira Key
When link binary object, dsi_freq_head is undefined,
No kernel symbal table was imported.
Match kernel version for user build.
Change-Id: I73d4ea7c02c22c449ce7f266e54e1e0a17e16bd8
Signed-off-by: zoujc <zoujc@motorola.com>
Reviewed-on: https://gerrit.mot.com/1957477
Reviewed-by: Jianqi Yang <yangj@motorola.com>
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Submit-Approved: Jira Key
some platform not support power present state
use online instead
Change-Id: Ia234b8d4fc33c3f4e8e43a87e96fb9b34a12ffc1
Signed-off-by: cuijy1 <cuijy2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1951809
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ningkai Zhuang <zhuangnk1@lenovo.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Need to allow group others to access driver interfaces in sysfs
Change-Id: Ic83b07674ee5396abc58aae3cf21ddf883c3196b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1934267
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Haptics waveform has shape up and shape down settings that were not
availbale through sysfs set_waveform interface. This change adds an
extra parameter allowing for waveform shape to be specified.
Includes some code cleanup as well
Change-Id: I1901b69520515d79f1f6ccf4d701fc373aab74e9
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1952944
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
1. When the panel enters the active state, the gesture_enable should be set to 0.
2. When resume, the charger mode is already set, so not to wirte.
3. When the CONTROLLER_READY event is not polled, perform a system reset.
Change-Id: I5281e9cb4e962f5f0a1c9460fecd541ae72fa3f4
Reviewed-on: https://gerrit.mot.com/1950039
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Update kernel driver to support revision C of BOS0614
Change-Id: I025f5f9e8bf8d17eb92bcf0e1f7f940c4238e3d8
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1938220
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Schedule chrg cable ps-notification to update work after 3secs, to
allow cable status update. This will improve gpio timing to within
3secs, vs waiting for next reg schedulked work, which could be 30s
Change-Id: I5c9d252c9d23be6bad085fb7bd9b3b892f5ea2e8
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1947523
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
When the first finger is down, report BTN_TOUCH down event once,
and only when all fingers are up, BTN_TOUCH up event will be reported.
Change-Id: I23c1b0673157daa280a9a1c365cbcd7452a147fc
Reviewed-on: https://gerrit.mot.com/1946914
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
The value of u16_chip0Id is read from firmware, if the firmware is
lost, this value is fts0000, and the init.mmi.touch.sh service cannot
find the matching firmware to upgrade. So the productinfo should use
the value read from hardware.
Change-Id: Ic7f8ad98d574a4f7861a4a192aa10a87870788a5
Reviewed-on: https://gerrit.mot.com/1946543
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
The Android build infrastructure is transitioning to a new
mechansim for building external modules.
Starting from Taro(8450), update moto drivers to use that
mechanism.
Change-Id: Ic3640feabd6bd77334861d3f73082907ed88648b
Signed-off-by: a7301c <a7301c@motorola.com>
Reviewed-on: https://gerrit.mot.com/1941175
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
1. There is no need to set scan mode when setting the charge_mode.
2. Setting the scan mode will refresh the baseline and possibly
calibrate the fingers to th baseline.
Change-Id: Ia7e8a2aa538a52b9f0314b6591b09ebbc8d4c238
Reviewed-on: https://gerrit.mot.com/1944110
Reviewed-by: Jichao Zou <zoujc@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
TP:
1. When using the request_irq, the level trigger type caused an abnormal
interruption on the sm8350 platform, and even an interruption storm.
2. In the request_irq, the "fts_event_handler" function will be passed
to handler, and the handler is still called in hard interrupt context.
I think it is better to use request_threaded_irq function to handle events.
Change-Id: Ie1b7275306d0d498d5e550756f5be20f557107fb
Reviewed-on: https://gerrit.mot.com/1942457
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Includes the following fixes:
1) waveform ID in autoplay
2) signed and unsigned representation
Waveform ID cannot be limited to 0&1 only.
While it's not affecting values assigned to the corresponding
parameters, it's weird to see wrong value printed in kernel log
Change-Id: I32df3ad88c1917ed33f6264c3afe672693339bdb
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1942571
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
