Reboot callback might be called multiple times causing a soft lock.
This change clears flags and invalidates pointers to avoid repeated
function call.
Change-Id: I73010f64960f238faacd2fac2f2a831e36b63d71
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1190524
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
This feature is not used in moto projects.
Change-Id: I21b4ab7f33e448e4ce7bfaa4992ed26900b64b90
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1189236
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Added device tree entries for default GPIO1 rising-edge index,
falling-edge index, and falling-edge timeout to be written to
the corresponding DSP firmware controls during initialization.
Change-Id: Ib8f0b662fdf8367e31608cdc121fdcade0fdd1be
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added device tree binding documentation for GPIO1 rising-edge
wavetable index, falling-edge wavetable index and falling-edge
timeout device tree entries.
Change-Id: I0b527eda2969428aadc0a8bd11131f46387cc3d6
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added a safety check to ensure that the values written to the
gpio1_fall_timeout and standby_timeout controls do not exceed the
maximum value supported by the DSP.
Change-Id: I8b5dca1f5013acb2d06688af577d0214ce956559
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
SoC bus controller driver may choose to use DMA for the underling data
transfer. This patch removes the usage of stack for DMA buffer.
Bug: 79998874
Test: manual haptics test
Change-Id: I5729ecc9751eb1af768261b66c499ccb9957cb69
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added GPIO configuration and amplifier digital volume to the list of
registers restored to their respective default values following the
shutdown of ROM mode, but the initialization of RAM mode (B1 only).
Change-Id: If317a0b7145718d45cea3249037a503d60c32d37
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Removed the ability to force the PLL active (aoh_auto_enable = 0)
as it is forbidden to do so with firmware revision 4.1.0 and above.
* Fixed playback queue polling interval to 5 ms.
Change-Id: I2e79a0becbdd2f7d4e10d15af0f675f945f0ab9f
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added wakeup calls in order to prevent the system from suspending
while continuous vibration is in progress.
Change-Id: I295fbe3098ebda4710bcd90653609c284d8c69a3
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Replaced references to a local copy of digital volume (mapped to the
dig_scale sysfs control) with an actual query of the device.
Change-Id: If5c1a3d65a4466299f198f751f6364e979243fd1
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Replaced changes to the chip-level digital volume control (dig_scale)
during execution of the playback queue with changes to the firmware's
control-port-triggered amplitude control (cp_dig_scale) to prevent
changes to the amplitude of GPIO-triggered playback during execution
of the playback queue.
Change-Id: Ice5b7a36978a73f2c2408f2f1ead8dbb48dbe8f9
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Added sysfs controls for the firmware's separate GPIO-triggered
playback and control-port-triggered playback amplitude controls.
* Increased the minimum supported firmware revision to 4.1.0.
Change-Id: Idae3fa1a839871cfa2760f14fc3b6ecf707fbd93
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Added device tree entries for default f0/ReDC values to be written
to the corresponding DSP firmware controls during initialization.
* Added device tree entries for minimum and maximum values that may
be written to the f0_stored and redc_stored sysfs controls.
Change-Id: I5b681efc38e466d1545496f327da66f189c8fc89
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added device tree binding documentation for default, minimum and
maximum f0 and ReDC device tree entries.
Change-Id: I7f3d7170e51e81bf4900c4065500a78fbae55878
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added the ability to group multiple segments together and repeat them
multiple times within the queue.
Change-Id: I0eb3a4931092961e8ac332ee5f4d5507a0128c20
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Replaced instances of strcpy and strchr with strlcpy and strnchr,
respectively.
* Eliminated use of strlen.
Change-Id: I44e0a47329a2d2d3bc440aee3a0f0bce5f4a0971
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Updated PLL loop parameters as per new errata issued for the device.
Change-Id: I772b4b93b91eec6ee1ed90461e3df57ceb0562a9
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Routed the battery monitoring ADC output (VPMON) to the DSP in support
of DSP algorithms that may query the battery voltage.
Change-Id: I8d83ed6a3f8ad7f0d985406eb4ef4038760151ca
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added a shutdown sequence to safely exit basic-mode haptics following
device power-on, prior to re-initializing the device and booting the
DSP into normal operation.
Change-Id: I3955f60fa736071d0af80edc65777100ef9865b0
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added errata writes for expedited PLL lock time in support of reduced
haptic latency.
Change-Id: I558a895c9973752759ff17f4212db8bbb6027337
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added map 0xE to the list of packed OTP memory maps supported by
revision A0 silicon.
Change-Id: I86f60afd5af223617a70d61cb3185e7c38078b64
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Added a sysfs control to prevent the device from automatically entering
standby in order to reduce latency of subsequent haptic events.
* Reduced the polling interval of the playback queue for cases in which
automatic entry into standby is disabled.
Change-Id: I5e695b33641ffe305b95f73f2eef89c94de65922
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Added the ability to trigger multiple waveform indexes and delays in
a sequence based on a string passed to a sysfs control.
* Moved the call to start vibe_timer to the vibe_start_worker function
and restricted the timer's use to continuous playback.
* Canceled vibe_timer prior to destroying vibe_workqueue.
* Replaced hard-coded waveform indexes with macros.
* Replaced all digital volume register writes with a single function.
Change-Id: I1b28bcc8d9d2a90bda432f0d3def83563baf9496
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Enabled the device prior to enabling the DSP to ensure internal clocks
are present while revision A0 silicon initializes firmware.
* Corrected the waveform filename and replaced with a macro.
* Updated the minimum supported firmware revision to 3.0.0.
Change-Id: If41a6865e661e55f3eed8f401bcfe19176af3de3
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Removed write to GLOBAL_EN during initialization as this control is
now managed autonomously by firmware.
* Replaced trigger control DSP memory addresses with their fixed-address
representations in the mailbox space.
* Added sysfs controls for the firmware's GPIO1 falling edge timeout and
standby timeout controls.
* Increased the minimum supported firmware revision to 2.1.0.
Change-Id: I38cdac4e6ac79fb8f354750ac724ce119eb7764c
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added device tree binding documentation for CS40L25, CS40L25A and
CS40L25B devices.
Change-Id: I4b809d34aad193915f25044ade404db83d6aa3ad
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Removed extraneous variable initialization from cs40l20_init and moved
linked list initialization to cs40l20_i2c_probe so that cs40l20_init is
limited to device configuration only.
* Limited REFCLK configuration to revisions A0 and B0 of silicon because
revision B1 ROM handles it automatically.
Change-Id: I5e626f5476cad4d1b1f5bc359714cf04c0425f1f
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Separated DSP initialization into its own function and qualified the
silicon revision to determine the appropriate firmware file and boot
sequence.
Change-Id: Ic2d50e8604d390877cf431811963d95be72d1ba6
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Changed regmap cache type to REGCACHE_NONE to disable caching of
chip-level registers outside the DSP.
* Removed cs40l2x_reg array and cs40l2x_volatile_reg callback.
* Added macros for register addresses introduced with B0 silicon.
* Removed unused register mask/shift macros.
Change-Id: I3e47e265d413a7c22b59abb761ef066074f928d2
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Updated the qualification of the device ID to include part numbers
programmed by the OTP controller (e.g. revisions B0 and B1).
* Conditionalized OTP memory unpack and application of errata based
on silicon revision.
Change-Id: I7c8c6f194c6f300e632b3382dca5f54eed6f6603
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Renamed all files and namespaces from cs40l20 to cs40l2x.
* Added platform driver entries for CS40L25, CS40L25A and CS40L25B.
* Updated copyright year to 2018.
Change-Id: I2b2266a9870e713d454bee3cfc3e01e5e53bc191
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Added a check for the expected revision of silicon.
* Added support for revision A0 errata.
Change-Id: Id647367a23d1856ee3c61c0b2e83d4ed71584f09
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Exposed the firmware's click compensation enable control as a sysfs
control.
Change-Id: I9cbc4454c52277eee486dff80c19de481d3668a0
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Corrected the calculation of algorithm revision
* Limited the comparison of algorithm revisions to the MAJOR field
Change-Id: I903802f98c472109aa5d62915ab611b1ff869c80
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Replaced printing of wavetable entry count with the num_waves sysfs
control.
* Removed printing of custom/default wavetable notification as existing
request_firmware_nowait already prints in the case of failure.
Change-Id: Id86ad20d12bb23b029338c0b847ecdeb80248cfa
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Exposed the firmware's heartbeat register as a read-only sysfs control
and printed the firmware revision number at startup.
Change-Id: Iaf844e72b2f2618a7c67156432c63e2375c388ab
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Added a means to reject user-provided wavetables that do not match the
algorithm ID and revision advertised by the firmware.
* Added a means to calculate the maximum allowable wavetable size for a
given revision of firmware, and then reject user-provided wavetables
that exceed the calculated limit.
Change-Id: Ib1d04bdc5f8d6c2150cd1d313a3f61178adeffe6
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added the redc_stored sysfs control to expose access to the firmware's
stored ReDC input parameter.
Change-Id: Ifb6ca330f9b1a546c024d9e066dbb4da5fafe4c6
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Corrected various register default values, updated the list of registers
marked as volatile and removed some inapplicable register macros.
Change-Id: I51ca890aaa98001e85728a113670a391911b00a1
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Exposed a means to apply attenuation to the device's digital signal
path with the dig_scale control.
Change-Id: I66cd3bc425e770faf8b2ee0fd89ffbb20a394d5c
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added precious_reg regmap callback to prevent the device's OTP memory
from being read outside of the driver's control.
Change-Id: I1dbd76a1d918187d8e2d9757b26785aad5484dba
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Updated the initialization sequence to apply trim data stored in
OTP memory.
Change-Id: I4854fe8ee394d04522c7db540b68b270a674901b
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Added a timeout loop to allow the firmware sufficient time to load
after the DSP is enabled.
* Increased the minimum supported firmware revision to 0x000205.
Change-Id: I7403060a7ea11a19efb9debdd4c3aac694662b6e
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Preserved device state correctly if new work is scheduled before
diagnostics is cancelled.
* Removed hard coding of diagnostics trigger index.
* Updated minimum supported firmware revision to 0x000202.
Change-Id: I5b667cf32a588e329eb03face69ad8e7e0a13e71
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Rearranged entry into and exit from closed-loop mode
* Checked for mutex lock in f0/ReDC capture function
* Moved mutex init and destroy to probe and remove, respectively
Change-Id: I38d83e9eb3881f833bf000ce760f4a8fda7fa17f
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added support for diagnostics stimulus generation as well as f0
and ReDC reporting.
Change-Id: I0a496501cc229026897865cca2333ba0a70f8bf0
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Added support for large wavetables that straddle both X memory (XM) and
Y memory (YM).
Change-Id: If946713744228a1010ff12715548c74a76fa3a85
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Allowed for the MSB of the cp_trigger_index sysfs control to indicate
that playback should be rendered until forcibly stopped.
Change-Id: Ic9c0111a7b4110d482174bfd475697bb2ac2c17a
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
* Added missing mutex lock/unlock around regmap access.
* Changed waveform index store functions to use an unsigned int.
* Added measured-f0 show function and stored-f0 show/store functions.
Change-Id: I00eb137ee65bb863d3208b0a1ab3b5e3f7464fbe
Signed-off-by: Jeff LaBundy <jeff.labundy@cirrus.com>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
