When the post resume runs it stores the values set in init
if the values were updated when the chip was on instead of the
new values.
Copy the new values to the buffer regardless of the state.
Change-Id: I6ab9bf709746f2ac67eee786c4c5f36e9fcb1b72
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1516061
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
1. In case of touch power off, upper layer access node to set
pill_region and suppression, which generate I2C error.
2. Set power state when power on and power off.
Change-Id: I147c6aacbf215ecba431f9ee15e8a955e346155b
Reviewed-on: https://gerrit.mot.com/1514772
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
HX83102D is a low tier IC, need to create baseline early, so move
resume to early blank, but need to avoid lcd reset conflict, so
add some delay for this.
Change-Id: I3c98e3e41c5a1ee68084b4ffd0e69f76e3b51d8b
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1512722
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Add store/show functions to the hold distance register
at 0xAB.
Change-Id: Ic697012de0ec22c4b4ebfbd6c39be159273be858
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1511303
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Sometimes we find that the IC can't enter standby mode.
The root casue is that the period between go bit operation
and standby mode operation was less than 2ms.
Add wakelock to avoid this concurrent issue.
Change-Id: I318741acd2e60a019a32da3e91a6b373fe2d3020
Signed-off-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1508966
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Add dts property to configure force_device_on_en_default
so the product can choose this option in dts.
Once this option is set, the TOF device will always be in
on state, the xshut will keep high and avdd will be on all
the time.
Change-Id: I0b74bcafdcb94e5b9356ff94ede4a97c62e57bdc
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1507387
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Submit-Approved: Jira Key
Update bq27426 driver documentation, explaining how to add a battery
profile to a product, as well as the Device Tree parameters.
Additionally, what needs to be done in case it is a Dual Battery-based
product/architecture.
Change-Id: I6ecaf039087a7d83b26abe32c83f4ba96cc248ba
Signed-off-by: Cesar Santos <cmsantos@motorola.com>
Reviewed-on: https://gerrit.mot.com/1494396
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
Add the battery profile header files to makefiles to build with correct
battery profile information
NO_PROP_NEEDED: change only necessary for smith battery. Does not affect
Olson
Change-Id: I73f32af18d91ffa573edb285d850cd3c450e9c7c
Signed-off-by: Andrew Abbott <drewa@motorola.com>
Reviewed-on: https://gerrit.mot.com/1494276
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
Add *.fs files from TI for smith batteries and the *.h files generated
by converting the raw *.fs files using convbqfs.pl
Add *.fs and *h files for defender from defender branch
Separate "raw" and "imported" battery profile files into subdirectories
NO_PROP_NEEDED: change adds battery profiles for defender and smith.
Olson does not use these battery profiles.
Change-Id: Ida5d1a937f8046b4d926d3dd8e851f5a205e0bdf
Signed-off-by: Andrew Abbott <drewa@motorola.com>
Reviewed-on: https://gerrit.mot.com/1493722
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
Using boost mode for long vibrations leads to desense issues.
The long vibration waveform will be modified to increase power
instead.
This reverts commit e5c9b40ce9f6d9abf83dfde7da4adbd0f52664ef.
Change-Id: Idb38ad2fd1f51578ee3c1610ef13c90628b5dbb1
Signed-off-by: Perry White <awhite6@motorola.com>
Reviewed-on: https://gerrit.mot.com/1505515
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
As sec_mmi_pre_suspend() is called in the path of display-off, too long
blocking would possibly cause user space module "Display Controller" to
be out of syncing display power state.
Set a timeout for checking wake lock instead of waiting for forever.
Change-Id: Ie72bda93eaaf66e89ed34d33911ec1fdfea5b0cb
Signed-off-by: Shiyong Li <a22381@motorola.com>
Reviewed-on: https://gerrit.mot.com/1506510
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
1. Create a separate lock for gesture event reporting to solve the
problem of blocking pre_suspend and then blocking the next wake-up.
2. According to BSP test, it takes 1500 ms for the touch to receive
the gesture event and the upper layer to complete the processing.
Change-Id: I93a18399876beba49100b41a0561103b2b9fa86d
Reviewed-on: https://gerrit.mot.com/1505298
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
when the batttery is discharging, if the hearbeat work schedule time is
too short, and work frequently will lead to power consumption problems.
Change-Id: Id9120295ee1452b14e790d6bc5876fd5fd94c6c2
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1504442
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
- Add configuration and lib for wakeup gesture.
- Apply for display new interface to implement single tap for TDDI.
Change-Id: I404229ca6268094566076587ee7803759eddedf4
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1503785
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
This feature allows to put device in Adaptive Charging. It has three modes:
- Auto (charger until upper SoC, and goes to 100% on a predefined time)
- Manual scheduled (same as Auto, but user defines predefined time)
- Manual (user defines upper and lower SoC limits, l(CR) an extended Demo Mode)
This feature is ideal for continuously plugged devices.
Change-Id: Id6fe80d358657c5e0142d8a5cd28b71596510fb3
Reviewed-on: https://gerrit.mot.com/1501961
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Minor message review (l(CR) changing some to start with uppercase
letters), as well as standardizing to all messages to present
"SMBMMI" text on this driver.
Change-Id: Id05eea39db9853c4d20069e73c393bd921b5c4e4
Signed-off-by: Cesar Santos <cmsantos@motorola.com>
Reviewed-on: https://gerrit.mot.com/1504251
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Add POWER_SUPPLY_PROP_HOT_TEMP property, which will be set
to 1 if we are either too hot to charge or in the highest
temp zone. Otherwise report 0.
Change-Id: I67495fad2da2e30bc99e6ac5629d918d63d917ee
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1499274
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Reduce the dc current by 100mA if the battery reports
that it has entered a hot temp zone. Charging is more
efficient if the battery is cool. Each time the temp zone
is re-entered the current will be reduced. When the temp zone
is exited a timer of 5 minutes will start, and if the high
zone is not entered again the max current will be restored
by triggering dc AICL to rerun.
Change-Id: I5b9ac02410e33a729bcade957d9a5676376a0cb6
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1499273
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Cesar Augusto Marcelino dos Santos <cmsantos@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
-there is a defect when RF location is different
-modify enable process of Sar
Change-Id: Ib018136c6f9ded6f580432d6202f92d6830434c2
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1499395
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jiacheng Ou <oujc1@motorola.com>
Reviewed-by: Wen Xie <xiewen3@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
log output process
extract name of input and cdev to dts
Change-Id: I554cb2e24be6ea4038d9106e2e7fc85b5b7e24c5
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1498941
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wen Xie <xiewen3@motorola.com>
Reviewed-by: Jiyue Cui <cuijy2@lenovo.com>
Reviewed-by: Jiacheng Ou <oujc1@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Add an entry for the new default ringtone into the RTP
ringtone->waveform map
Change-Id: I1f7faa906ad13b462c5673a88bfbdffe2d50db3c
Signed-off-by: Perry White <awhite6@motorola.com>
Reviewed-on: https://gerrit.mot.com/1498409
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Make sure non-fatal errors do not appear in the kernel log
Change-Id: I57a973709eb0f2ae1b6a2df7375fd8e821f6cfee
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1497921
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Pill region support added to improve edge double tap detection.
UI will utilize IMotTouch HAL to control this feature. Feature
needs to be optionally enabled by adding sec,pill-region-control
property to device tree node.
Change-Id: I582063c653ddd7631e6bf843c981726997d7c1ad
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1497429
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
TP:
Modify the power on process of synaptics touchscreen to solve
the problem of power failure.
Change-Id: I8963e3db920de3830b81eb95611cce1696ac111f
Reviewed-on: https://gerrit.mot.com/1496299
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Because there is no disable-irq in LPM mode, I2C communication may
occur when system suspends, resulting in conflict, which may lead to
system crash.
So we disable-irq when PM suspend, and then enable-irq again in the
suspend_noirq phase.
Change-Id: Ib9ca3f1f2a6d2da0142c6203acedb617535fc4a0
Reviewed-on: https://gerrit.mot.com/1494642
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
If dts defined size to pixel factor, report those two value in pixel
unit.
Change-Id: Ie89e8d9427cc80d82a742e4ab2efbe8c468ac16e
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1493096
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
Initializing the touch PM_MODE is PM_ACTIVE when registering the
notification chain, to solve I2C error in the first suspend.
Change-Id: I80e6a20484cba58dd1f8a25c0b0707d0b8a95eb7
Reviewed-on: https://gerrit.mot.com/1493127
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Force dcin-en on in the 8150b pmic when a wireless charger
is attached. There appears to be a hardware glitch where
an undervoltage event will cause the feedback enabling dcin-en
to stop, which prevents us from charging even though the charger
is attached and working.
With this change, we have to determine if we are connected based
on whether the attach detect gpio is on instead of a voltage
at VRECT, because VRECT will always be high when we force dcin-en
to be on.
Change-Id: I887266b9316b556a3b1dd12997ae67b5c7a324d9
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1491980
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
PMIC receive usbin OV events, OV IRQ triggers for
very small duration in interim periods sometimes.
while this periods check charge type will judge inbox
charger adapter as weak charge. now logic is always
recognize weak charge even if OV event disappear.
So add real time check weak charge type mechanism.
Change-Id: I18072c56b505f2508292d6b335f71a646d48b6d7
Reviewed-on: https://gerrit.mot.com/1486223
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Error status bits weren't being checked, so RTP mode
would attempt to continue despite errors being present,
causing occasional lock-ups and delays
Change-Id: I9de871e3e2e0ba2255e621b5a8505e87edd90f1e
Signed-off-by: Perry White <awhite6@motorola.com>
Reviewed-on: https://gerrit.mot.com/1491069
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
1. Process of panel off and on
Panel OFF:
(pre_suspend)->IRQ_OFF->INTO_MODE ->(post_suspend)->PINCTRL_OFF->POWER_OFF
Panel ON:
POWER_ON->RESET->PINCTRL_ON->(pre resume)->MODE->IRQ_ON->(post resume)
2. Only when both the sensor and the gesture are enabled can the
gesture mode be entered.
3. Interrupt will be turned on only in gesture mode.
4. Turn off the power only when Power_off_suspend is set
and not in gesture mode
Change-Id: I962cde8711333a4f213b01dccc99a3268e3ca519
Reviewed-on: https://gerrit.mot.com/1479065
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
To meet IC power on sequence, if IC power is not always on, need to wait
for 70ms before checking IC status. If no delay added, I2C communication
may fail sometimes. This is copied from sec_ts_probe.
Change-Id: I85b3a8a2b444ea2e3e77a60e2fcc45c8b976bc6c
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1489000
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Submit-Approved: Jira Key
Add disconnect mutex guard to tx mode and flashing
the firmware to prevent unexpected racing.
Add a check_status on probe in case we are starting from
a reboot attached to a pad and have already handled the IRQ.
Change-Id: I5c6a4fad548e2e7b6847ec51da6791b51dd71e98
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1489666
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Add build flags to cci_intf so that only kernel versions 4.19 and above
will have this functionality. This is because older kernel versions will
use a different cci_intf header and will not build.
Change-Id: I69111b4161734303e8a1c99223623896ac5d112b
Reviewed-on: https://gerrit.mot.com/1488924
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Rav(CR) Vembu <raviv@motorola.com>
Submit-Approved: Jira Key
Main OIS requires 16 bit writes. cci_intf only supports 8 bit writes
currently. Add a field to allow user to specify data width. Add logic to
proccess data according to that width.
Change-Id: I5da72399d9060ab60775488f36c5f72262a105a9
Reviewed-on: https://gerrit.mot.com/1488484
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jian Luan <jamesluan@motorola.com>
Reviewed-by: Rav(CR) Vembu <raviv@motorola.com>
Submit-Approved: Jira Key
(cherry picked from commit 63e2369c5c00ed0a504f9a45e0a3be381faafd55)
Reviewed-on: https://gerrit.mot.com/1488831
There are too many cases of a wireless charger showing as
charging when it is not. Only show when LDO is turned on
even if it sacrifices some detection speed.
Change-Id: I9bd1cb03428f4be4fcd2847b50fd7f0e9122154e
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1488807
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Show that we are charging when VRECT_ON is triggered.
This unfortunately leads to some edge cases where we will
toggle the charger on and off if on the edge of the pad.
Additionally clean up the remove function so that we
do not race with the status interrupt in any context.
We will process the removal of a charger if (1) detect
IRQ goes low (2) we fail to read I2C or (3) the heartbeat
function reads there is no voltage at VRECT.
Change-Id: Ieec364bfa2a7bac8966dea3951d913ad7bdefee9
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1487527
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
