qctecmdr
ca287bde87
Merge "ARM: dts: msm: add DCC register list for sdxlemur"
2021-01-08 04:04:49 -08:00
qctecmdr
b2ca49ebff
Merge "ARM: dts: msm: correct modem etm0 connecton on sdxlemur"
2021-01-08 04:04:49 -08:00
qctecmdr
6d202fbfb3
Merge "ARM: dts: msm: Adding CoreTech sa8195 DT Changes to Mainline 5.4"
2021-01-08 04:04:49 -08:00
qctecmdr
8e63c2dc9a
Merge "ARM: dts: msm: Add pinctrl information for Yupik target"
2021-01-08 04:04:49 -08:00
Sarthak Garg
fc340212ac
ARM: dts: msm: Add iommu and h/w reset support for yupik
...
Add iommu devicetree property for eMMC and SD card.
Also add h/w reset support for eMMC.
Change-Id: I22e5a8d23f3edfc2c251cced8aced6f727a0b299
2021-01-08 15:58:43 +05:30
Prakash Gupta
809a8cfb9d
ARM: dts: msm: update apps smmu interrupt list
...
It has been observed that multiple global combine fault is reported along
with S1 fault.
example:
[<0000000023afa98c>] irq_default_primary_handler threaded
[<000000002951795b>] arm_smmu_global_fault
Disabling IRQ #55
arm-smmu c600000.apps-smmu: FAR = 0x0000000000000000
arm-smmu c600000.apps-smmu: PAR = 0x0000000000000000
arm-smmu c600000.apps-smmu: FSR = 0x40000402 [TF W SS ]
arm-smmu c600000.apps-smmu: TTBR0 = 0x0000000000000000
arm-smmu c600000.apps-smmu: TTBR1 = 0x0000000000000000
arm-smmu c600000.apps-smmu: SCTLR = 0x00c000e7 ACTLR = 0x00000001
arm-smmu c600000.apps-smmu: CBAR = 0x0001f300
arm-smmu c600000.apps-smmu: MAIR0 = 0xf404ff44 MAIR1 = 0x000000e4
Fault count:
IRQ 55 100001 arm-smmu global fault
Remove unnecessary global interrupt from EL1 apps smmu interrupt list.
Change-Id: Ifda67dc5aee92d09a48cdf31d5e22cc2e234ed7a
2021-01-08 15:37:38 +05:30
Jagadeesh Kona
5e41344a66
ARM: dts: msm: Mark GCC PCIE clocks as protected in YUPIK
...
GCC PCIE clocks does not need to be controlled from HLOS in
YUPIK, hence mark them as protected and remove support for
PCIE GDSC's.
Change-Id: I6111c9b37d1a90f4552560334fb5e963778b2921
2021-01-08 15:16:38 +05:30
Ajit Kumar
7c73ddd175
bindings: Add device-tree bindings for slatecom SPI driver
...
Add device-tree bindings documentation describing the properties
for the slatecom SPI driver.
Change-Id: Id6f5ad7f0bc30600f77eaa1b4246e5a47135f43f
2021-01-08 15:13:02 +05:30
Nitesh Gupta
e598c121e3
ARM: dts: msm: Adding CoreTech sa8195 DT Changes to Mainline 5.4
...
Changes Included:-
1.) PCIE:- 3315638
2.) USB:- 3303659
3.) BUSES:- 3265704
4.) STORAGE:- 3306109.
Change-Id: I6f206b8722cb046d45cc90ca76f72b72b34ab727
2021-01-08 01:33:19 -08:00
Lijuan Gao
929a7fd7db
ARM: dts: msm: Add scm dt nodes for sdxnightjar
...
Add scm and scm pas device tree nodes for sdxnightjar target.
These are required for pil image authentication.
Change-Id: I066ca55d37aea8e248f4df88bba363a472bebabe
2021-01-08 17:05:12 +08:00
Tapas Dey
43237301ff
ARM: dts: msm: Add I2C NFC device node and LDO voting for yupik
...
Device node changes required on yupik describing the GPIO
configuration for Nfc controller chip.
Modified corresponding Nfc device node for ATP, MTP & QRD
platforms.
Add device node properties to support NFC LDO voting.
Change-Id: Ic41b05505db6970be002578255c21242f75fdbc4
2021-01-08 13:44:04 +05:30
Ashok Vuyyuru
fb67569025
ARM: dts: msm: Adding IPA nodes for yupik target
...
Adding IPA nodes for yupik target.
Change-Id: If0a0c2d77117d51f2fe1e22258effba7984b777d
2021-01-08 12:38:46 +05:30
Lijuan Gao
446dc787b0
ARM: dts: msm: Added pil nodes for sdxnightjar
...
Added entries for pil modem nodes on sdxnightjar.
Change-Id: I1cfaef1fa1799501fea760ced44f2d68959f29b0
2021-01-08 14:49:08 +08:00
xsang
b4df1eefbc
ARM: dts: qcom: swap WSA enable pin
...
Swap WSA enable pin due to right speaker using first one.
Change-Id: I22679cc5615c30d718053692c11de97244203b26
2021-01-08 14:38:14 +08:00
Naman Padhiar
e03c652af1
ARM: dts: msm: Add SMP2P entry and enable SIDs for WLAN
...
Add smp2p entry to communicate between APPS and WPSS.
Add SIDS and enable S1 bypass in ICNSS2 node.
Change-Id: I26c082e65ac6b7d98b51bb91947060e23e66c2b8
2021-01-08 11:58:21 +05:30
Lijuan Gao
0cde770cc6
bindings: Add device-tree bindings for pil-q6v5 driver
...
Add device-tree bindings documentation describing the properties
for the pil-q6v5 driver.
Change-Id: I8b91cefc4b4cdf226d28565705c2815edc1b761c
2021-01-08 13:51:19 +08:00
qctecmdr
2cd79af548
Merge "ARM: dts: msm: Enable qsee drivers for yupik"
2021-01-07 19:00:56 -08:00
qctecmdr
564ea81836
Merge "ARM: dts: msm: Add fastrpc and cdsp/adsp device node"
2021-01-07 19:00:56 -08:00
Devender Kaushik
af2dba926e
ARM: dts: msm: add remote debugger support
...
Add remote debugger device configuration. The Remote Debugger driver
allows a debugger running on a host PC to communicate with a remote
stub running on peripheral subsystems.
Change-Id: I8ac42ca0d737f6891cc8eb4689a3c7e5653140df
2021-01-07 16:05:42 +05:30
Sarthak Garg
f316097565
ARM: dts: msm: Add SDIO support for sdxnightjar
...
Add SDIO support for sdxnightjar.
Change-Id: Ib6d3df8894cc993d362b253c42c378013c438d31
2021-01-07 14:29:39 +05:30
Naina Mehta
6b40000d5b
ARM: dts: msm: Add feature config node for qfprom for Yupik
...
Add feature config node for qfprom for reading fuse bits for
Yupik SoC.
Change-Id: Id839a115243f28c548a12688d51261b15a734966
2021-01-07 00:05:29 -08:00
Neeraj Upadhyay
4a1b850b6f
ARM: dts: msm: Update GIC interrupt polarity for Yupik
...
Correct the interrupt polarity for GIC. Here, we are changing
interrupt polarity for GIC to adhere with other chipsets.
Change-Id: Ibe8b561bb6caac586d10014930cd19fba544e308
2021-01-07 12:00:27 +05:30
Santosh Mardi
9298de6f20
ARM: dts: msm: add dcvs nodes for yupik target
...
Add dcvs nodes for yupik target needed to scale
L3, LLCC and DDR frequencies.
Change-Id: Ic891e8e78efadd08727da5bb055727f51c915509
2021-01-06 22:15:28 -08:00
Minghao Zhang
f35a613833
dt-bindings: add documentation for max31760 fancontroller
...
Add documentation for MAX31760 Fan Controller driver.
Change-Id: Ib065dec13fee8f5f7890468c8562fbf54206f35b
2021-01-07 10:59:13 +08:00
Kasin Li
343be50d33
ARM: dts: msm: add bindings for HGSL driver
...
Hgsl communicates with GPU hardware using either GPU registers or
TCSR compute signaling hardware block.
Change-Id: I881941953ee2340a4c47f10e85e4b0a1dfb87a50
2021-01-07 00:49:29 +08:00
Saurabh Ambulkar
ea84bb0f58
ARM: dts: msm: Add device node for PIL scm pas on SM8150
...
Add PIL device tree node for pil_scm_pas on sm8150.
Change-Id: I475359192355a1b9c22505036e00355666aabc09
2021-01-06 22:12:52 +05:30
Anil Kumar Kanakanti
ecc5553052
ARM: dts: msm: Add camera device pinctrl change for Yupik camera
...
Include GPIO pinctrl changes for cam sensor and cci device nodes
for Yupik camera.
Change-Id: Ic7de3d4478a222bcd5e716d45bade508bd6f11e3
2021-01-06 19:01:07 +05:30
Saurabh Ambulkar
f3b1e79deb
ARM: dts: msm: Add slpi device node for PIL on SM8150
...
Add PIL device tree node to load firmware images of
slpi on sm8150.
Change-Id: I890b05c40aea755c1c631a3b1e7556bfca155f80
2021-01-06 03:35:58 -08:00
Saurabh Ambulkar
f2e2f9d4ea
ARM: dts: msm: Add modem device node for PIL SM8150
...
Add PIL device tree node to load firmware images of
modem on SM8150.
Change-Id: I2e6c2c0c5e20c948213bd9fa7873d86ac13bb140
2021-01-06 17:05:27 +05:30
Saurabh Ambulkar
a92910f592
ARM: dts: msm: Add device node for IMEM on SM8150
...
Add IMEM device tree node on sm8150 target.
Change-Id: I3fac756393c9d5152a52b3f42bcf35163584d7e9
2021-01-06 17:05:13 +05:30
Ram Prakash Gupta
9e320d1cc0
dt-bindings: ufs: Add compatible string for yupik phy driver
...
This change add compatible string information for yupik UFS phy
driver.
Change-Id: I79a898fb5abb80cdb159ac63231f7a0e02f88beb
2021-01-06 16:17:01 +05:30
Satish Kodishala
e6ef72b48a
ARM: dts: qcom: Add dtsi entry for BT slimbus in yupik
...
Add BT slimbus node entry in yupik dt.
CRs-Fixed: 2849376
Change-Id: If2546f1d98f37d734786232393c0e098ae9fb869
2021-01-06 02:18:12 -08:00
Kavya Nunna
2f2549d26c
ARM: dts: msm: Enable SMB1351 for sdxnightjar
...
Enable SMB1351 for sdxnightjar, SMB1351 is a single-cell battery
charger. It can charge the battery and power the system via the
USB/AC adapter input.
Change-Id: I9d8c8431d7dd49a5b2e8a7936058f7df77d5ef0f
2021-01-06 00:48:51 -08:00
Zijun Hu
61b9aeffe4
ARM: dts: msm: Enable bluetooth for sdxnightjar
...
Enable bluetooth for sdxnightjar.
CRs-Fixed: 2848490
Change-Id: Iedb40bb8208128a94bf1b6e76a1b2e633a570895
2021-01-06 00:43:06 -08:00
Jishnu Prakash
338c0369c0
ARM: dts: msm: correct refgen type for holi
...
Correct the compatible property for refgen regulator used on holi.
Change-Id: I623a0a3d2acd4f22419858fac50e7801397b4518
2021-01-06 13:54:39 +05:30
Rakesh Kota
fdb14d445b
ARM: dts: msm: Add cpu clock node for sdxnightjar
...
The CPU clock node is required to be enabled to be able to switch
various CPU clock. While at it, also update the regulator phandles
to use the levels phandles.
Change-Id: I1ee31ca20e565664e21b0d8f5e6a9f4be5787c76
2021-01-06 13:39:22 +05:30
Akash Asthana
a91bdb9f1b
ARM: dts: msm: Correct QUPv3 device nodes
...
Fix interrupt number, usage of shared flag and GSI mask values.
Also remove the obsolete device nodes.
Change-Id: Ia735f1f0402e56688a4bb6068b5db4e2f3e7614c
2021-01-06 12:11:35 +05:30
Prakash Gupta
c603e634a8
ARM: dts: msm: remove kgsl smmu interconnect node for Lahaina
...
Remove kgsl smmu interconnect node. For TCU config register access we
shouldn't required DDR path votes. KGSL smmu already votes for clock and
regulator so it should be fine.
Change-Id: I7ecf688aeafe07c6a844220b217a5f49380b6795
2021-01-06 11:18:34 +05:30
Bojun Pan
34f0a89aa4
ARM: dts: msm: enable HOLB monitor feature
...
Enable HOLB monitor feature.
Change-Id: I2c725f17e1454f41a447aeec495869c4050385c7
2021-01-05 17:49:22 -08:00
Rishabh Bhatnagar
5d0dac9fe4
ARM: dts: msm: Add support for ddr scaling on sdxlemur
...
Add ddr bandwidth table and other dt nodes to support ddr
bandwidth scaling for sdxlemur target.
Change-Id: I9580bd0bb7d78019b2750a2bb7f8df273560dce0
2021-01-05 10:59:15 -08:00
Rishabh Bhatnagar
043c3d60b4
ARM: dts: msm: Add device node for ARM PMU for Olympic
...
Add the ARM CPU Performace measuring unit device tree node to
measure various hardware events like cache misses, cycles etc.
Change-Id: If0d1f358757586e7774ce2810c4683dbc152da66
2021-01-05 10:58:59 -08:00
Rishabh Bhatnagar
2a29e84f1c
ARM: dts: msm: Add bindings for ARM performance measuring unit
...
Add initial bindings for ARM PMU driver. This enables measurement
of events like cycles, cache misses etc.
Change-Id: I80521c085b90b851e38abf8af03da68711aa8120
2021-01-05 10:56:39 -08:00
qctecmdr
d9e39aa973
Merge "bindings: mproc: add smdpkt.txt"
2021-01-05 10:50:52 -08:00
qctecmdr
f71a16d40d
Merge "ARM: dts: msm: Update the APSSCC clock node for SDXLEMUR"
2021-01-05 10:50:52 -08:00
Fei Mao
84fdc29d74
dt-bindings: Add dt binding for NT36xxx driver
...
Add device tree binding document for new touch driver.
Change-Id: Ib45cabd7b2de3d094dc6832a9aff66520b033aaa
2021-01-05 10:12:43 -08:00
gururaj chalgeri
83682c0361
ARM: dts: msm: Add fastrpc and cdsp/adsp device node
...
Add fastrpc context banks, memory regions, cdsp device node
adsp and also restricting dma pools.
Change-Id: Ia7177230e060519256f81ff6d25576f24a78b8cd
2021-01-05 22:23:06 +05:30
Christopher Braga
b5ed7585d2
ARM: dts: msm: Introduce demura HFC region nodes
...
ABL expects the demura HFC region nodes to always be present
under a device's reserved memory regions. If this node is not
present, ABL is unable to insert it and demura continuous
splash cannot be handled.
Introduce dummy demura HFC regions into the device tree.
These nodes are given an address and size of 0 to allow the
kernel to specially handle them.
Change-Id: I6b95a145b4d515e24a454d9ad293e477e6dec66f
2021-01-05 11:46:39 -05:00
qctecmdr
98713fd021
Merge "ARM: dts: msm: Add GDSC for HS USB PHY for SDXNIGHTJAR"
2021-01-05 06:05:12 -08:00
qctecmdr
3d5cee7ee0
Merge "ARM: dts: msm: add setting for Lahaina HHG audio"
2021-01-05 06:05:12 -08:00
qctecmdr
d029b8a371
Merge "ARM: dts: msm: add stub interconnect devices for Monaco"
2021-01-05 06:05:12 -08:00